Benchmark #10062 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#107 / 1,679
170
#678 / 1,679
#655 / 984
#25 / 69
6,097
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-22 10:49:04
#10,062
2,541
-3,556 (-139.94%)
Anonymous
Alex SSD

Storage Details
Transcend MSA Series
SSD (mSATA)
16G
SSD
Transcend
TS16GMSA370
SATA
2.10
480
045b:0229
0x045b (Hitachi, Ltd)
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
250 (-250)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
21.1 MB/s
21.29 MB/s
20.49 MB/s
4,223 IOPS
3,433 IOPS
16,894 KB/s
13,735 KB/s
10,910 KB/s
9,557 KB/s
8,739 KB/s
12,131 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=d34db44f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 1014.7 MiB (25.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 158x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 44.64 GiB used: 5.58 GiB (12.5%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Transcend model: TS16GMSA 370 size: 14.91 GiB block size: physical: 4096 B logical: 512 B rev: P122 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.82 GiB size: 14.53 GiB (98.01%) used: 5.53 GiB (38.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: a7c329e8-1b03-4157-bda0-3f6255f34e10 ID-2: /boot raw size: 94.0 MiB size: 92.5 MiB (98.44%) used: 54.0 MiB (58.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 072B-C816 ID-3: /media/fritzbox-usb raw size: N/A size: 931.82 GiB used: 130.73 GiB (14.0%) fs: cifs remote: //192.168.X.X/FRITZ.NAS/My_Passport label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 14.82 GiB fs: ext4 label: N/A uuid: a7c329e8-1b03-4157-bda0-3f6255f34e10 ID-2: /dev/sda1 size: 94.0 MiB fs: vfat label: BOOT uuid: 072B-C816 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Atmel LUFA USB to Serial Adapter Project type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 03eb:204b Device-2: 1-1.2:4 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Device-3: 1-1.3:5 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-4: 1-1.4:6 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x stretch main 2: deb-src https: //deb.nodesource.com/node_10.x stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 6.8% command: iobroker.js-controller pid: 517 mem: 101.1 MiB (2.5%) 2: cpu: 3.6% command: io.fhem.0 pid: 1999 mem: 60.9 MiB (1.5%) 3: cpu: 2.1% command: perl pid: 1963 mem: 103.6 MiB (2.6%) 4: cpu: 1.7% command: io.javascript.0 pid: 1015 mem: 119.4 MiB (3.0%) 5: cpu: 0.5% command: bash pid: 9340 mem: 2.81 MiB (0.0%) Memory top: 5 1: mem: 119.4 MiB (3.0%) command: io.javascript.0 pid: 1015 cpu: 1.7% 2: mem: 103.6 MiB (2.6%) command: perl pid: 1963 cpu: 2.1% 3: mem: 101.1 MiB (2.5%) command: iobroker.js-controller pid: 517 cpu: 6.8% 4: mem: 73.6 MiB (1.8%) command: io.admin.0 pid: 887 cpu: 0.3% 5: mem: 61.5 MiB (1.5%) command: io.backitup.0 pid: 2068 cpu: 0.1% Info: Processes: 206 Uptime: 5h 36m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 
           root=PARTUUID=d34db44f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 1014.7 MiB (25.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 158x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 44.64 GiB used: 5.58 GiB (12.5%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS16GMSA 370 size: 14.91 GiB 
           block size: physical: 4096 B logical: 512 B rev: P122 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.82 GiB size: 14.53 GiB (98.01%) used: 5.53 GiB (38.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: a7c329e8-1b03-4157-bda0-3f6255f34e10 
           ID-2: /boot raw size: 94.0 MiB size: 92.5 MiB (98.44%) used: 54.0 MiB (58.3%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 072B-C816 
           ID-3: /media/fritzbox-usb raw size: N/A size: 931.82 GiB used: 130.73 GiB (14.0%) 
           fs: cifs remote: //192.168.X.X/FRITZ.NAS/My_Passport label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.82 GiB fs: ext4 label: N/A 
           uuid: a7c329e8-1b03-4157-bda0-3f6255f34e10 
           ID-2: /dev/sda1 size: 94.0 MiB fs: vfat label: BOOT uuid: 072B-C816 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Atmel LUFA USB to Serial Adapter Project 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s 
           chip ID: 03eb:204b 
           Device-2: 1-1.2:4 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage 
           driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Device-3: 1-1.3:5 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-4: 1-1.4:6 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x stretch main
           2: deb-src https: //deb.nodesource.com/node_10.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 6.8% command: iobroker.js-controller pid: 517 mem: 101.1 MiB (2.5%) 
           2: cpu: 3.6% command: io.fhem.0 pid: 1999 mem: 60.9 MiB (1.5%) 
           3: cpu: 2.1% command: perl pid: 1963 mem: 103.6 MiB (2.6%) 
           4: cpu: 1.7% command: io.javascript.0 pid: 1015 mem: 119.4 MiB (3.0%) 
           5: cpu: 0.5% command: bash pid: 9340 mem: 2.81 MiB (0.0%) 
           Memory top: 5 
           1: mem: 119.4 MiB (3.0%) command: io.javascript.0 pid: 1015 cpu: 1.7% 
           2: mem: 103.6 MiB (2.6%) command: perl pid: 1963 cpu: 2.1% 
           3: mem: 101.1 MiB (2.5%) command: iobroker.js-controller pid: 517 cpu: 6.8% 
           4: mem: 73.6 MiB (1.8%) command: io.admin.0 pid: 887 cpu: 0.3% 
           5: mem: 61.5 MiB (1.5%) command: io.backitup.0 pid: 2068 cpu: 0.1% 
Info:      Processes: 206 Uptime: 5h 36m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #10062 - Brand: Transcend MSA Series