Benchmark #10100 - pibenchmarks.com

Brand: PNY CS1111
SSD (2.5" SATA)
#574 / 1,679
14
#539 / 1,679
#519 / 984
#100 / 370
6,836
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-22 12:51:59
#10,100
5,578
-1,258 (-22.55%)
Anonymous
PNY Optima 240GB SSD on Pi 4 using StarTech USB3S2SAT3CB

Storage Details
PNY CS1111
SSD (2.5" SATA)
240G
SSD
PNY
ASM105x
SATA
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
161 MB/s
283.6 MB/s
216 MB/s
8,842 IOPS
20,855 IOPS
35,371 KB/s
83,421 KB/s
15,229 KB/s
16,273 KB/s
10,333 KB/s
14,833 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=60551ff9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 481.8 MiB (12.1%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 189x92 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 281.57 GiB used: 6.43 GiB (2.3%) ID-1: /dev/mmcblk0 model: SD64G size: 58.00 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: SSD2SC240G1SA754D117-820 size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 6.38 GiB (2.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: bd9c3864-5ee4-4374-a1d8-2d63adcfd33f ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA Unmounted: ID-1: /dev/mmcblk0p2 size: 57.74 GiB fs: ext4 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0409:005a Device-1: 1-1.3.4:4 info: ATEN CS682 2-Port USB 2.0 DVI KVM Switch type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0557:2213 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.6% command: init pid: 1 mem: 7.99 MiB (0.2%) 2: cpu: 1.0% command: xorg pid: 480 mem: 45.8 MiB (1.2%) 3: cpu: 0.7% command: smartd pid: 1458 mem: 3.17 MiB (0.0%) 4: cpu: 0.3% command: lxpanel pid: 607 mem: 27.7 MiB (0.7%) 5: cpu: 0.3% command: lxterminal pid: 955 mem: 47.7 MiB (1.2%) Memory top: 5 1: mem: 47.7 MiB (1.2%) command: lxterminal pid: 955 cpu: 0.3% 2: mem: 45.8 MiB (1.2%) command: xorg pid: 480 cpu: 1.0% 3: mem: 27.7 MiB (0.7%) command: lxpanel pid: 607 cpu: 0.3% 4: mem: 21.0 MiB (0.5%) command: pcmanfm pid: 609 cpu: 0.2% 5: mem: 15.0 MiB (0.4%) command: openbox pid: 602 cpu: 0.1% Info: Processes: 147 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=60551ff9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait 
           Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 481.8 MiB (12.1%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 189x92 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 281.57 GiB used: 6.43 GiB (2.3%) 
           ID-1: /dev/mmcblk0 model: SD64G size: 58.00 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: SSD2SC240G1SA754D117-820 size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 6.38 GiB (2.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: bd9c3864-5ee4-4374-a1d8-2d63adcfd33f 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
Unmounted: ID-1: /dev/mmcblk0p2 size: 57.74 GiB fs: ext4 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: NEC HighSpeed Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0409:005a 
           Device-1: 1-1.3.4:4 info: ATEN CS682 2-Port USB 2.0 DVI KVM Switch type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0557:2213 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.6% command: init pid: 1 mem: 7.99 MiB (0.2%) 
           2: cpu: 1.0% command: xorg pid: 480 mem: 45.8 MiB (1.2%) 
           3: cpu: 0.7% command: smartd pid: 1458 mem: 3.17 MiB (0.0%) 
           4: cpu: 0.3% command: lxpanel pid: 607 mem: 27.7 MiB (0.7%) 
           5: cpu: 0.3% command: lxterminal pid: 955 mem: 47.7 MiB (1.2%) 
           Memory top: 5 
           1: mem: 47.7 MiB (1.2%) command: lxterminal pid: 955 cpu: 0.3% 
           2: mem: 45.8 MiB (1.2%) command: xorg pid: 480 cpu: 1.0% 
           3: mem: 27.7 MiB (0.7%) command: lxpanel pid: 607 cpu: 0.3% 
           4: mem: 21.0 MiB (0.5%) command: pcmanfm pid: 609 cpu: 0.2% 
           5: mem: 15.0 MiB (0.4%) command: openbox pid: 602 cpu: 0.1% 
Info:      Processes: 147 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #10100 - Brand: PNY CS1111