Benchmark #10323 - pibenchmarks.com

Brand: Synology DiskStation DS918+ NAS Server
SSD (NAS)
#478 / 1,539
12
#849 / 1,539
#786 / 875
#0 / 2
3,711
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-24 16:49:35
#10,323
2,028
-1,683 (-82.99%)
Anonymous
iSCSI from Synology NAS via CAT-6 on Pi4

Storage Details
Synology DiskStation DS918+ NAS Server
SSD (NAS)
SSD
Synology
iSCSIStorage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
57.1 MB/s
1,912 IOPS
1,975 IOPS
7,651 KB/s
7,901 KB/s
8,369 KB/s
7,336 KB/s
8,459 KB/s
6,790 KB/s

inxi Results
System: Host: rpi4 Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=iscsi Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 234.0 MiB (6.0%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 147x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::a9f4:dcb1:ab82:f7ae/64 scope: link IP v6: fe80::dea6:32ff:fe23:a9ae/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 210.195.X.X Drives: Local Storage: total: 39.72 GiB used: 68.1 MiB (0.2%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda model: iSCSI Storage size: 10.00 GiB block size: physical: 512 B logical: 512 B N/A rev: 4.0 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 127.0 MiB size: 126.7 MiB (99.79%) used: 68.1 MiB (53.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: 92F1-47F3 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.60 GiB fs: vfat label: N/A uuid: 7844-B8E0 ID-2: /dev/sda1 size: 9.88 GiB fs: ext4 label: berryboot uuid: 1956838d-e735-4098-b9e7-745d2e5cac11 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://mirror.aarnet.edu.au/pub/raspbian/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.3% command: bash pid: 3991 mem: 2.78 MiB (0.0%) 2: cpu: 0.1% command: [kworker/u8:2-iscsi_q_0] pid: 4010 mem: 0.00 MiB (0.0%) 3: cpu: 0.0% command: lib/systemd/systemd pid: 1 mem: 7.87 MiB (0.2%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 16.9 MiB (0.4%) command: pihole-ftl pid: 749 cpu: 0.0% 2: mem: 13.8 MiB (0.3%) command: php-cgi pid: 601 cpu: 0.0% 3: mem: 8.71 MiB (0.2%) command: systemd-journald pid: 253 cpu: 0.0% 4: mem: 7.87 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 0.0% 5: mem: 6.70 MiB (0.1%) command: systemd pid: 3931 cpu: 0.0% Info: Processes: 135 Uptime: 9h 01m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.0.37

inxi Results

System:    Host: rpi4 Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=iscsi 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.79 GiB used: 234.0 MiB (6.0%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 147x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
           IP v6: fe80::a9f4:dcb1:ab82:f7ae/64 scope: link 
           IP v6: fe80::dea6:32ff:fe23:a9ae/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 210.195.X.X 
Drives:    Local Storage: total: 39.72 GiB used: 68.1 MiB (0.2%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda model: iSCSI Storage size: 10.00 GiB block size: physical: 512 B logical: 512 B N/A rev: 4.0 
           scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 127.0 MiB size: 126.7 MiB (99.79%) used: 68.1 MiB (53.8%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: BOOT uuid: 92F1-47F3 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.60 GiB fs: vfat label: N/A uuid: 7844-B8E0 
           ID-2: /dev/sda1 size: 9.88 GiB fs: ext4 label: berryboot uuid: 1956838d-e735-4098-b9e7-745d2e5cac11 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://mirror.aarnet.edu.au/pub/raspbian/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.3% command: bash pid: 3991 mem: 2.78 MiB (0.0%) 
           2: cpu: 0.1% command: [kworker/u8:2-iscsi_q_0] pid: 4010 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.0% command: lib/systemd/systemd pid: 1 mem: 7.87 MiB (0.2%) 
           4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 16.9 MiB (0.4%) command: pihole-ftl pid: 749 cpu: 0.0% 
           2: mem: 13.8 MiB (0.3%) command: php-cgi pid: 601 cpu: 0.0% 
           3: mem: 8.71 MiB (0.2%) command: systemd-journald pid: 253 cpu: 0.0% 
           4: mem: 7.87 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 0.0% 
           5: mem: 6.70 MiB (0.1%) command: systemd pid: 3931 cpu: 0.0% 
Info:      Processes: 135 Uptime: 9h 01m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh 
           inxi: 3.0.37

Benchmark #10323 - Brand: Synology DiskStation DS918+ NAS Server