Benchmark #10388 - pibenchmarks.com

Brand: Generic SSD
SSD (Portable)
#5 / 1,539
930
#441 / 1,539
#423 / 875
#75 / 137
6,557
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-25 06:45:04
#10,388
5,955
-602 (-10.11%)
Anonymous

Storage Details
Generic SSD
SSD (Portable)
SSD
Generic
GenericSSD
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
114 MB/s
4,712 IOPS
5,068 IOPS
18,849 KB/s
20,272 KB/s
28,457 KB/s
22,325 KB/s
22,291 KB/s
27,148 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1576:u elevator=deadline quiet bootmenutimeout=5 datadev=UUID=00e28728-0f59-43c9-8f65-a598c3a785d8 qmap=de Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.79 GiB used: 510.0 MiB (13.1%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 96x25 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.4:4 chip ID: 046d:0825 Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 124.40 GiB used: 67.5 MiB (0.1%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: TrekStor model: SSD128GB size: 117.00 GiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 7.40 GiB size: 7.39 GiB (99.80%) used: 67.5 MiB (0.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: E118-7180 Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: exfat label: N/A uuid: 5227-2C46 ID-2: /dev/sda2 size: 116.88 GiB fs: ext4 label: berryboot uuid: 00e28728-0f59-43c9-8f65-a598c3a785d8 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Jing-Mold Enterprise type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 05af:0630 Device-2: 1-1.4:4 info: Logitech Webcam C270 type: Video,Audio driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 046d:0825 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1576 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 10.6% command: octoprint started by: python2 pid: 398 mem: 60.3 MiB (1.6%) 2: cpu: 4.5% command: lib/systemd/systemd pid: 1 mem: 8.32 MiB (0.2%) 3: cpu: 1.3% command: xorg pid: 488 mem: 46.4 MiB (1.2%) 4: cpu: 0.9% command: [usb-storage] pid: 90 mem: 0.00 MiB (0.0%) 5: cpu: 0.8% command: lxpanel pid: 738 mem: 27.6 MiB (0.7%) Memory top: 5 1: mem: 60.3 MiB (1.6%) command: octoprint started by: python2 pid: 398 cpu: 10.6% 2: mem: 46.4 MiB (1.2%) command: xorg pid: 488 cpu: 1.3% 3: mem: 27.6 MiB (0.7%) command: lxpanel pid: 738 cpu: 0.8% 4: mem: 19.9 MiB (0.5%) command: pcmanfm pid: 739 cpu: 0.7% 5: mem: 17.6 MiB (0.4%) command: vncserver-x11-core pid: 445 cpu: 0.1% Info: Processes: 164 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1576:u elevator=deadline quiet 
           bootmenutimeout=5 datadev=UUID=00e28728-0f59-43c9-8f65-a598c3a785d8 qmap=de 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.79 GiB used: 510.0 MiB (13.1%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 96x25 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.4:4 
           chip ID: 046d:0825 Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 124.40 GiB used: 67.5 MiB (0.1%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: TrekStor model: SSD128GB size: 117.00 GiB block size: 
           physical: 512 B logical: 512 B rev: 0204 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 7.40 GiB size: 7.39 GiB (99.80%) used: 67.5 MiB (0.9%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: E118-7180 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: exfat label: N/A uuid: 5227-2C46 
           ID-2: /dev/sda2 size: 116.88 GiB fs: ext4 label: berryboot 
           uuid: 00e28728-0f59-43c9-8f65-a598c3a785d8 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Jing-Mold Enterprise type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 05af:0630 
           Device-2: 1-1.4:4 info: Logitech Webcam C270 type: Video,Audio 
           driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 046d:0825 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1576 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 10.6% command: octoprint started by: python2 pid: 398 mem: 60.3 MiB (1.6%) 
           2: cpu: 4.5% command: lib/systemd/systemd pid: 1 mem: 8.32 MiB (0.2%) 
           3: cpu: 1.3% command: xorg pid: 488 mem: 46.4 MiB (1.2%) 
           4: cpu: 0.9% command: [usb-storage] pid: 90 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.8% command: lxpanel pid: 738 mem: 27.6 MiB (0.7%) 
           Memory top: 5 
           1: mem: 60.3 MiB (1.6%) command: octoprint started by: python2 pid: 398 cpu: 10.6% 
           2: mem: 46.4 MiB (1.2%) command: xorg pid: 488 cpu: 1.3% 
           3: mem: 27.6 MiB (0.7%) command: lxpanel pid: 738 cpu: 0.8% 
           4: mem: 19.9 MiB (0.5%) command: pcmanfm pid: 739 cpu: 0.7% 
           5: mem: 17.6 MiB (0.4%) command: vncserver-x11-core pid: 445 cpu: 0.1% 
Info:      Processes: 164 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #10388 - Brand: Generic SSD