Benchmark #10424 - pibenchmarks.com

Brand: SanDisk X400 M.2
SSD (M.2 SATA)
#349 / 1,700
38
#471 / 1,700
#454 / 989
#45 / 116
7,259
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-25 10:52:28
#10,424
7,535
+276 (+3.66%)
Anonymous

Storage Details
SanDisk X400 M.2
SSD (M.2 SATA)
128G
SSD
SanDisk
SD8SN8U-128G-1006
less than 1.8 inch
SATA
3.00
5,000
1d6b:0576
0x1d6b (Linux Foundation)
0x0576
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
111 MB/s
312.42 MB/s
275.8 MB/s
8,812 IOPS
22,933 IOPS
35,249 KB/s
91,735 KB/s
31,495 KB/s
24,837 KB/s
20,690 KB/s
32,099 KB/s

inxi Results
System: Host: sniegas.lan Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=44548912-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 502.2 MiB (25.0%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 212x26 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:78ff:fe07:cd6e/64 scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::b7c1:bea9:aac9:7b73/64 scope: link IF-ID-3: veth1ba5df2 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth60a929c state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth74c823b state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth789adb9 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: vethfdd57e9 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 78.56.X.X Drives: Local Storage: total: 148.97 GiB used: 16.13 GiB (10.8%) ID-1: /dev/mmcblk0 model: SU32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 117.24 GiB size: 115.35 GiB (98.39%) used: 8.04 GiB (7.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: ff4aefba-3dc0-4078-a3ce-9c7dd16626bf ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /var/lib/docker/overlay2/0033bc807a59abfa0421ff158cd9cfc76ec59dc69208b77dda79299fdcf77bce/merged raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/3cfc516cc44a3026b301b691d0df88d4350d6b62f6ae817cc0e89cbdd7377a3a/merged raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/bbd542bbc11b8e15b4938029b509b391d020beb873a2b355350957c4e9990e7c/merged raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/d4a3098711a7469acbfdda1440653dbccab492d96c751acd257b6968304c930e/merged raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/e4a6e98f44df7a2567c7de940318291b1b44ce05254d28781155971a3e36b26d/merged raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/ea1b696790e07e49298bdc2a0c83601eb86c5a67e0503e41a617868eed20257a/merged raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda2 label: N/A uuid: c67f8f6a-260f-4ade-9cb6-e3adf4b4ac3b Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Device-2: 1-1.4:4 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 __0X00124B00193E5102 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 23.9% command: python3 pid: 952 mem: 87.2 MiB (4.3%) 2: cpu: 6.1% command: pigpiod pid: 347 mem: 1.65 MiB (0.0%) 3: cpu: 5.9% command: node-red pid: 1572 mem: 93.8 MiB (4.7%) 4: cpu: 1.6% command: node pid: 1546 mem: 49.8 MiB (2.5%) 5: cpu: 1.5% command: telegraf pid: 427 mem: 39.7 MiB (1.9%) Memory top: 5 1: mem: 93.8 MiB (4.7%) command: node-red pid: 1572 cpu: 5.9% 2: mem: 87.2 MiB (4.3%) command: python3 pid: 952 cpu: 23.9% 3: mem: 62.4 MiB (3.1%) command: dockerd pid: 511 cpu: 1.1% 4: mem: 49.8 MiB (2.5%) command: node pid: 1546 cpu: 1.6% 5: mem: 39.7 MiB (1.9%) command: telegraf pid: 427 cpu: 1.5% Info: Processes: 157 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.37

inxi Results

System:    Host: sniegas.lan Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=44548912-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
Memory:    RAM: total: 1.96 GiB used: 502.2 MiB (25.0%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 212x26 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           IP v6: fe80::42:78ff:fe07:cd6e/64 scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::b7c1:bea9:aac9:7b73/64 scope: link 
           IF-ID-3: veth1ba5df2 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-4: veth60a929c state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-5: veth74c823b state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-6: veth789adb9 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-7: vethfdd57e9 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 78.56.X.X 
Drives:    Local Storage: total: 148.97 GiB used: 16.13 GiB (10.8%) 
           ID-1: /dev/mmcblk0 model: SU32G size: 29.72 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 119.24 GiB block size: physical: 4096 B 
           logical: 512 B rev: 1507 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 117.24 GiB size: 115.35 GiB (98.39%) used: 8.04 GiB (7.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: N/A uuid: ff4aefba-3dc0-4078-a3ce-9c7dd16626bf 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /var/lib/docker/overlay2/0033bc807a59abfa0421ff158cd9cfc76ec59dc69208b77dda79299fdcf77bce/merged 
           raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/3cfc516cc44a3026b301b691d0df88d4350d6b62f6ae817cc0e89cbdd7377a3a/merged 
           raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/bbd542bbc11b8e15b4938029b509b391d020beb873a2b355350957c4e9990e7c/merged 
           raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/d4a3098711a7469acbfdda1440653dbccab492d96c751acd257b6968304c930e/merged 
           raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/e4a6e98f44df7a2567c7de940318291b1b44ce05254d28781155971a3e36b26d/merged 
           raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/ea1b696790e07e49298bdc2a0c83601eb86c5a67e0503e41a617868eed20257a/merged 
           raw size: N/A size: 115.35 GiB used: 8.04 GiB (7.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-9: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) 
           dev: /dev/sda2 label: N/A uuid: c67f8f6a-260f-4ade-9cb6-e3adf4b4ac3b 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: QinHeng HL-340 USB-Serial adapter type:  driver: ch341,ch341-uart 
           interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Device-2: 1-1.4:4 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 
           speed: 12 Mb/s chip ID: 0451:16a8 __0X00124B00193E5102 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 152d:0576 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 23.9% command: python3 pid: 952 mem: 87.2 MiB (4.3%) 
           2: cpu: 6.1% command: pigpiod pid: 347 mem: 1.65 MiB (0.0%) 
           3: cpu: 5.9% command: node-red pid: 1572 mem: 93.8 MiB (4.7%) 
           4: cpu: 1.6% command: node pid: 1546 mem: 49.8 MiB (2.5%) 
           5: cpu: 1.5% command: telegraf pid: 427 mem: 39.7 MiB (1.9%) 
           Memory top: 5 
           1: mem: 93.8 MiB (4.7%) command: node-red pid: 1572 cpu: 5.9% 
           2: mem: 87.2 MiB (4.3%) command: python3 pid: 952 cpu: 23.9% 
           3: mem: 62.4 MiB (3.1%) command: dockerd pid: 511 cpu: 1.1% 
           4: mem: 49.8 MiB (2.5%) command: node pid: 1546 cpu: 1.6% 
           5: mem: 39.7 MiB (1.9%) command: telegraf pid: 427 cpu: 1.5% 
Info:      Processes: 157 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) 
           inxi: 3.0.37

Benchmark #10424 - Brand: SanDisk X400 M.2