Benchmark #10427 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#60 / 1,700
319
#1,005 / 1,700
#919 / 989
#130 / 145
3,228
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-25 11:01:30
#10,427
4,497
+1,269 (+28.22%)
Anonymous
SanDiskSSD_USB

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
128G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
0781:5588
0x0781 (SanDisk Corp.)
0x5588
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
183 MB/s
215.08 MB/s
212.98 MB/s
3,071 IOPS
3,064 IOPS
12,285 KB/s
12,259 KB/s
25,132 KB/s
21,475 KB/s
12,229 KB/s
12,384 KB/s

inxi Results
System: Host: raspberrypi4 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=aeb4804e-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 646.1 MiB (16.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 134x32 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-5: veth45ebfc0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth83ebb02 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth8a20db5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 148.97 GiB used: 7.48 GiB (5.0%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Pro size: 119.25 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.25 GiB size: 116.88 GiB (98.01%) used: 3.71 GiB (3.2%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: f20843a0-4873-4fa3-ac24-c0351a595ea2 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/1f57e917a594c3c36211b665b0ae0f9667d93a6428e650d99f379d37d9cbe274/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/2de12dff86320a30e364836e2748391ba961c0b4984d1945bb1364d9dfe60d07/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/6a7a43452c4ec7f75cc8b463a51875a130c32f17a3428a95f334f1234b7d9b1c/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/c3ba80c359d2154dbdbd6858f76d88fad464c559859eebb679062e54a06add01/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/cbc3fb66609182ef711370ac5ba231b1d87c7cf12e6e20530629ae0dc8407266/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.0% command: dockerd pid: 706 mem: 88.5 MiB (2.2%) 2: cpu: 4.4% command: glances started by: python3.8 pid: 7166 mem: 24.0 MiB (0.6%) 3: cpu: 2.0% command: python3 pid: 2995 mem: 73.4 MiB (1.8%) 4: cpu: 0.9% command: containerd pid: 705 mem: 32.5 MiB (0.8%) 5: cpu: 0.6% command: init pid: 1 mem: 8.17 MiB (0.2%) Memory top: 5 1: mem: 88.5 MiB (2.2%) command: dockerd pid: 706 cpu: 12.0% 2: mem: 73.4 MiB (1.8%) command: python3 pid: 2995 cpu: 2.0% 3: mem: 45.0 MiB (1.1%) command: docker pid: 1575 cpu: 0.0% 4: mem: 32.5 MiB (0.8%) command: containerd pid: 705 cpu: 0.9% 5: mem: 32.4 MiB (0.8%) command: python3 pid: 1622 cpu: 0.4% Info: Processes: 165 Uptime: 30m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi4 Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=aeb4804e-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 646.1 MiB (16.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 134x32 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-5: veth45ebfc0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth83ebb02 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth8a20db5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 148.97 GiB used: 7.48 GiB (5.0%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Pro size: 119.25 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.25 GiB size: 116.88 GiB (98.01%) used: 3.71 GiB (3.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: f20843a0-4873-4fa3-ac24-c0351a595ea2 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/1f57e917a594c3c36211b665b0ae0f9667d93a6428e650d99f379d37d9cbe274/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/2de12dff86320a30e364836e2748391ba961c0b4984d1945bb1364d9dfe60d07/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/6a7a43452c4ec7f75cc8b463a51875a130c32f17a3428a95f334f1234b7d9b1c/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/c3ba80c359d2154dbdbd6858f76d88fad464c559859eebb679062e54a06add01/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/cbc3fb66609182ef711370ac5ba231b1d87c7cf12e6e20530629ae0dc8407266/merged raw size: N/A size: 116.88 GiB used: 3.71 GiB (3.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.0% command: dockerd pid: 706 mem: 88.5 MiB (2.2%) 
           2: cpu: 4.4% command: glances started by: python3.8 pid: 7166 mem: 24.0 MiB (0.6%) 
           3: cpu: 2.0% command: python3 pid: 2995 mem: 73.4 MiB (1.8%) 
           4: cpu: 0.9% command: containerd pid: 705 mem: 32.5 MiB (0.8%) 
           5: cpu: 0.6% command: init pid: 1 mem: 8.17 MiB (0.2%) 
           Memory top: 5 
           1: mem: 88.5 MiB (2.2%) command: dockerd pid: 706 cpu: 12.0% 
           2: mem: 73.4 MiB (1.8%) command: python3 pid: 2995 cpu: 2.0% 
           3: mem: 45.0 MiB (1.1%) command: docker pid: 1575 cpu: 0.0% 
           4: mem: 32.5 MiB (0.8%) command: containerd pid: 705 cpu: 0.9% 
           5: mem: 32.4 MiB (0.8%) command: python3 pid: 1622 cpu: 0.4% 
Info:      Processes: 165 Uptime: 30m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #10427 - Brand: SanDisk Extreme Pro USB