Benchmark #105636 - pibenchmarks.com

Brand: Samsung CM871 M.2 Series
SSD (M.2 SATA)
#509 / 1,675
17
#924 / 1,675
#872 / 984
#108 / 115
4,328
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2025-03-24 10:11:10
#105,636
2,539
-1,789 (-70.46%)
Anonymous
MartinI root single disk

Storage Details
Samsung CM871 M.2 Series
SSD (M.2 SATA)
128G
SSD
Samsung
MZYLF128HCHP-000L2
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
17.5 MB/s
181.93 MB/s
214.28 MB/s
1,892 IOPS
20,217 IOPS
7,569 KB/s
80,868 KB/s
18,232 KB/s
10,498 KB/s
12,999 KB/s
5,607 KB/s

inxi Results
System: Host: raspi-sg Kernel: 6.6.74+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=9208a7ac-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A rev: d03115 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.63 GiB used: 1.04 GiB (13.6%) igpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: LabWC driver: N/A tty: 138x44 API: OpenGL Message: GL data unavailable in console, glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.6.74+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.2.7 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2002:5fd0:78fa:0:c0cb:aab5:1c64:c0a5/64 type: dynamic noprefixroute scope: global IP v6: fe80::ecdf:86e7:e008:66e1/64 type: noprefixroute scope: link IF-ID-1: br-0133639c9892 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X IP v6: fe80::7005:b8ff:fe9f:60f3/64 scope: link IF-ID-2: br-534df5af2c57 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::e4cc:66ff:fe1b:a4b0/64 scope: link IF-ID-3: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-4: veth72d10ba state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: vethb03a6a2 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: vethef32480 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 95.208.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 39.8 GiB (33.4%) ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: MZYLF128HCHP-000L2 size: 119.24 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: SSD fw-rev: FXT63L1Q temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4y 72d 12h cycles: 2443 read: 24.7 MiB written: 35.3 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.74 GiB size: 116.82 GiB (98.38%) used: 39.73 GiB (34.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 4aa56689-dcb4-4759-90e6-179beae559ac ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 75.7 MiB (14.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: EF6E-C078 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 2.93 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:4 info: Dresden Elektronik ZigBee gateway [ConBee II] type: abstract (modem),CDC-data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 174c:55aa class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 42.8 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1739 libs: 906 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bookworm stable Active apt repos in: /etc/apt/sources.list.d/nordvpn.list 1: deb https://repo.nordvpn.com//deb/nordvpn/debian stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Processes: CPU top: 5 of 318 1: cpu: 250% command: ps pid: 3746 mem: 4.00 MiB (0.0%) 2: cpu: 44.5% command: node pid: 3069 mem: 70.7 MiB (0.9%) 3: cpu: 42.4% command: matterbridge started-by: node pid: 1828 mem: 127.3 MiB (1.6%) 4: cpu: 40.1% command: node pid: 2000 mem: 108.6 MiB (1.3%) 5: cpu: 38.7% command: npm pid: 2775 mem: 98.8 MiB (1.2%) Memory top: 5 of 318 1: mem: 127.3 MiB (1.6%) command: matterbridge started-by: node pid: 1828 cpu: 42.4% 2: mem: 108.6 MiB (1.3%) command: node pid: 2000 cpu: 40.1% 3: mem: 98.8 MiB (1.2%) command: npm pid: 2775 cpu: 38.7% 4: mem: 97.3 MiB (1.2%) command: labwc pid: 992 cpu: 3.2% 5: mem: 92.7 MiB (1.1%) command: packagekitd pid: 2912 cpu: 19.1% Info: Processes: 318 Uptime: 0m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: Storage.sh (sudo) default: Bash v: 5.2.15 running-in: pty pts/1 (SSH) inxi: 3.3.31

inxi Results

System:
  Host: raspi-sg Kernel: 6.6.74+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave
    snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=ttyS0,115200 console=tty1 root=PARTUUID=9208a7ac-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles
  Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A rev: d03115
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.63 GiB used: 1.04 GiB (13.6%) igpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: LabWC
    driver: N/A tty: 138x44
  API: OpenGL Message: GL data unavailable in console, glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.6.74+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.2.7 status: n/a (root, process) with: 1: pipewire-pulse status: active
    2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X
  IP v6: 2002:5fd0:78fa:0:c0cb:aab5:1c64:c0a5/64 type: dynamic noprefixroute scope: global
  IP v6: fe80::ecdf:86e7:e008:66e1/64 type: noprefixroute scope: link
  IF-ID-1: br-0133639c9892 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X
  IP v6: fe80::7005:b8ff:fe9f:60f3/64 scope: link
  IF-ID-2: br-534df5af2c57 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
  IP v6: fe80::e4cc:66ff:fe1b:a4b0/64 scope: link
  IF-ID-3: docker0 state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
  IF-ID-4: veth72d10ba state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: vethb03a6a2 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: vethef32480 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  WAN IP: 95.208.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9
    sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.24 GiB used: 39.8 GiB (33.4%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: MZYLF128HCHP-000L2 size: 119.24 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1
    mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: SSD fw-rev: FXT63L1Q
    temp: 32 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 4y 72d 12h cycles: 2443 read: 24.7 MiB
    written: 35.3 MiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.74 GiB size: 116.82 GiB (98.38%) used: 39.73 GiB (34.0%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 4aa56689-dcb4-4759-90e6-179beae559ac
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 75.7 MiB (14.8%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: EF6E-C078
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 2.93 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.4:4 info: Dresden Elektronik ZigBee gateway [ConBee II]
    type: abstract (modem),CDC-data driver: cdc_acm interfaces: 2 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 1cf1:0030 class-ID: 0a00
      Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E
    bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s)
    lanes: 1 mode: 3.2 gen-1x1 chip-ID: 174c:55aa class-ID: 0806 Sensors:
  Src: /sys System Temperatures: cpu: 42.8 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1739 libs: 906 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bookworm stable
  Active apt repos in: /etc/apt/sources.list.d/nordvpn.list
    1: deb https://repo.nordvpn.com//deb/nordvpn/debian stable main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
Processes:
  CPU top: 5 of 318
  1: cpu: 250% command: ps pid: 3746 mem: 4.00 MiB (0.0%)
  2: cpu: 44.5% command: node pid: 3069 mem: 70.7 MiB (0.9%)
  3: cpu: 42.4% command: matterbridge started-by: node pid: 1828 mem: 127.3 MiB (1.6%)
  4: cpu: 40.1% command: node pid: 2000 mem: 108.6 MiB (1.3%)
  5: cpu: 38.7% command: npm pid: 2775 mem: 98.8 MiB (1.2%)
  Memory top: 5 of 318
  1: mem: 127.3 MiB (1.6%) command: matterbridge started-by: node pid: 1828 cpu: 42.4%
  2: mem: 108.6 MiB (1.3%) command: node pid: 2000 cpu: 40.1%
  3: mem: 98.8 MiB (1.2%) command: npm pid: 2775 cpu: 38.7%
  4: mem: 97.3 MiB (1.2%) command: labwc pid: 992 cpu: 3.2%
  5: mem: 92.7 MiB (1.1%) command: packagekitd pid: 2912 cpu: 19.1%
Info:
  Processes: 318 Uptime: 0m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: Storage.sh (sudo) default: Bash v: 5.2.15
  running-in: pty pts/1 (SSH) inxi: 3.3.31

Benchmark #105636 - Brand: Samsung CM871 M.2 Series