Benchmark #10683 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,679
1,774
#399 / 1,679
#386 / 984
#44 / 370
7,812
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-27 09:47:55
#10,683
4,239
-3,573 (-84.29%)
Fred
SanDisk 480G on Pi4 using JMicron USB Adapter

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
480G
SSD
SanDisk
SSDPLUS480GB
2.5 inch
SATA
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
157 MB/s
228.9 MB/s
193.71 MB/s
3,562 IOPS
3,070 IOPS
14,251 KB/s
12,283 KB/s
25,925 KB/s
19,453 KB/s
11,044 KB/s
12,571 KB/s

inxi Results
System: Host: nextcloudpi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1600x1200M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 318.2 MiB (15.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 476.11 GiB used: 2.21 GiB (0.5%) ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 447.14 GiB block size: physical: 512 B logical: 512 B rev: 8101 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 446.89 GiB size: 439.96 GiB (98.45%) used: 2.16 GiB (0.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.5 MiB (20.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 2.75 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c069 Hub: 1-1.4:4 info: PrehKeyTec Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 053a:0b00 Device-2: 1-1.4.1:5 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.0 speed: 1.5 Mb/s chip ID: df04:0004 Device-3: 1-1.4.2:6 info: OmniKey AG CardMan 3121 type: Smart Card driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 076b:3021 Device-4: 1-1.4.4:7 info: PrehKeyTec Preh MCI 3100 type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 053a:0b01 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-5: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 19.0% command: php pid: 1333 mem: 51.6 MiB (2.6%) 2: cpu: 2.7% command: [usb-storage] pid: 80 mem: 0.00 MiB (0.0%) 3: cpu: 2.4% command: init pid: 1 mem: 8.06 MiB (0.4%) 4: cpu: 1.7% command: mysqld pid: 879 mem: 92.3 MiB (4.7%) 5: cpu: 1.4% command: haveged pid: 300 mem: 4.27 MiB (0.2%) Memory top: 5 1: mem: 92.3 MiB (4.7%) command: mysqld pid: 879 cpu: 1.7% 2: mem: 51.6 MiB (2.6%) command: php pid: 1333 cpu: 19.0% 3: mem: 28.0 MiB (1.4%) command: php-fpm: pid: 569 cpu: 0.2% 4: mem: 15.6 MiB (0.8%) command: unattended-upgrade-shutdown started by: python3 pid: 576 cpu: 0.1% 5: mem: 8.88 MiB (0.4%) command: udisksd pid: 350 cpu: 0.3% Info: Processes: 149 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: nextcloudpi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1600x1200M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 318.2 MiB (15.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 476.11 GiB used: 2.21 GiB (0.5%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 447.14 GiB 
           block size: physical: 512 B logical: 512 B rev: 8101 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 446.89 GiB size: 439.96 GiB (98.45%) used: 2.16 GiB (0.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.5 MiB (20.8%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 2.75 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c069 
           Hub: 1-1.4:4 info: PrehKeyTec Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 053a:0b00 
           Device-2: 1-1.4.1:5 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.0 speed: 1.5 Mb/s chip ID: df04:0004 
           Device-3: 1-1.4.2:6 info: OmniKey AG CardMan 3121 type: Smart Card driver: N/A 
           interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 076b:3021 
           Device-4: 1-1.4.4:7 info: PrehKeyTec Preh MCI 3100 type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 053a:0b01 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-5: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 19.0% command: php pid: 1333 mem: 51.6 MiB (2.6%) 
           2: cpu: 2.7% command: [usb-storage] pid: 80 mem: 0.00 MiB (0.0%) 
           3: cpu: 2.4% command: init pid: 1 mem: 8.06 MiB (0.4%) 
           4: cpu: 1.7% command: mysqld pid: 879 mem: 92.3 MiB (4.7%) 
           5: cpu: 1.4% command: haveged pid: 300 mem: 4.27 MiB (0.2%) 
           Memory top: 5 
           1: mem: 92.3 MiB (4.7%) command: mysqld pid: 879 cpu: 1.7% 
           2: mem: 51.6 MiB (2.6%) command: php pid: 1333 cpu: 19.0% 
           3: mem: 28.0 MiB (1.4%) command: php-fpm: pid: 569 cpu: 0.2% 
           4: mem: 15.6 MiB (0.8%) command: unattended-upgrade-shutdown started by: python3 
           pid: 576 cpu: 0.1% 
           5: mem: 8.88 MiB (0.4%) command: udisksd pid: 350 cpu: 0.3% 
Info:      Processes: 149 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #10683 - Brand: SanDisk SSD Plus