Benchmark #10705 - pibenchmarks.com

Brand: PNY Elite Portable
SSD (Portable)
#138 / 1,675
120
#574 / 1,675
#554 / 984
#83 / 144
6,589
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-27 13:16:45
#10,705
6,549
-40 (-0.61%)
condi
PNY Elite Portable SSD 240GB USB 3.0 on Pi 4B 4GB

Storage Details
PNY Elite Portable
SSD (Portable)
240G
SSD
PNY
ELITEPSSD
less than 1.8 inch
SATA
3.00
5,000
1d6b:f009
0x1d6b (Linux Foundation)
0xf009
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
193 MB/s
269.78 MB/s
249.77 MB/s
6,253 IOPS
15,550 IOPS
25,013 KB/s
62,201 KB/s
31,588 KB/s
22,695 KB/s
17,670 KB/s
20,765 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b7e10a9b-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 563.2 MiB (14.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth2837685 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth7eeb358 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethc58a316 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 252.68 GiB used: 6.46 GiB (2.6%) ID-1: /dev/mmcblk0 model: SD32G size: 29.11 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: PNY model: ELITE PSSD size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 3.21 GiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: acac21e8-39aa-49d4-bec2-9575f955d777 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/3869b7640c3b8c94a37309175aceb3773773aa2ae8dd2e06743d0c95de0deaaa/merged raw size: N/A size: 219.03 GiB used: 3.21 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/74b0b51dca3b1298a1b18387a1ca4eb4a8e0d3a9a644ca934ab3b8e33d05601c/merged raw size: N/A size: 219.03 GiB used: 3.21 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/faf91aa73ecb45c85b2852cd4b04f71dfa94454c9bf4e88af2c798191572c68d/merged raw size: N/A size: 219.03 GiB used: 3.21 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 28.86 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: PNY type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 154b:f009 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 23.7% command: dockerd pid: 685 mem: 89.5 MiB (2.2%) 2: cpu: 4.3% command: python3 pid: 2524 mem: 72.4 MiB (1.8%) 3: cpu: 1.0% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 4: cpu: 0.8% command: init pid: 1 mem: 8.01 MiB (0.2%) 5: cpu: 0.7% command: python3 pid: 1296 mem: 31.5 MiB (0.8%) Memory top: 5 1: mem: 89.5 MiB (2.2%) command: dockerd pid: 685 cpu: 23.7% 2: mem: 72.4 MiB (1.8%) command: python3 pid: 2524 cpu: 4.3% 3: mem: 45.2 MiB (1.1%) command: docker pid: 1248 cpu: 0.0% 4: mem: 33.0 MiB (0.8%) command: containerd pid: 684 cpu: 0.1% 5: mem: 31.5 MiB (0.8%) command: python3 pid: 1296 cpu: 0.7% Info: Processes: 149 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b7e10a9b-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 563.2 MiB (14.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth2837685 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth7eeb358 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethc58a316 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 252.68 GiB used: 6.46 GiB (2.6%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 29.11 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: PNY model: ELITE PSSD size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 3.21 GiB (1.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: acac21e8-39aa-49d4-bec2-9575f955d777 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/3869b7640c3b8c94a37309175aceb3773773aa2ae8dd2e06743d0c95de0deaaa/merged raw size: N/A size: 219.03 GiB used: 3.21 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/74b0b51dca3b1298a1b18387a1ca4eb4a8e0d3a9a644ca934ab3b8e33d05601c/merged raw size: N/A size: 219.03 GiB used: 3.21 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/faf91aa73ecb45c85b2852cd4b04f71dfa94454c9bf4e88af2c798191572c68d/merged raw size: N/A size: 219.03 GiB used: 3.21 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.86 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: PNY type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 154b:f009 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 23.7% command: dockerd pid: 685 mem: 89.5 MiB (2.2%) 
           2: cpu: 4.3% command: python3 pid: 2524 mem: 72.4 MiB (1.8%) 
           3: cpu: 1.0% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.8% command: init pid: 1 mem: 8.01 MiB (0.2%) 
           5: cpu: 0.7% command: python3 pid: 1296 mem: 31.5 MiB (0.8%) 
           Memory top: 5 
           1: mem: 89.5 MiB (2.2%) command: dockerd pid: 685 cpu: 23.7% 
           2: mem: 72.4 MiB (1.8%) command: python3 pid: 2524 cpu: 4.3% 
           3: mem: 45.2 MiB (1.1%) command: docker pid: 1248 cpu: 0.0% 
           4: mem: 33.0 MiB (0.8%) command: containerd pid: 684 cpu: 0.1% 
           5: mem: 31.5 MiB (0.8%) command: python3 pid: 1296 cpu: 0.7% 
Info:      Processes: 149 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #10705 - Brand: PNY Elite Portable