Benchmark #10744 - pibenchmarks.com

Brand: AData S511
SSD (2.5" SATA)
#875 / 1,539
3
#824 / 1,539
#771 / 875
#297 / 363
4,040
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-02-27 19:32:32
#10,744
2,577
-1,463 (-56.77%)
Anonymous
test

Storage Details
AData S511
SSD (2.5" SATA)
120G
SSD
AData
SSDS511120GB
SATA
2.00
480
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
32.3 MB/s
28.02 MB/s
28.06 MB/s
2,869 IOPS
2,596 IOPS
11,478 KB/s
10,384 KB/s
11,660 KB/s
9,589 KB/s
10,077 KB/s
12,435 KB/s

inxi Results
System: Host: hmi-server Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=08fe19d4-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 328.0 MiB (32.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 317x86 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 113.63 GiB used: 3.91 GiB (3.4%) ID-1: /dev/mmcblk0 model: SU02G size: 1.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: A-Data model: SSD S511 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 3.86 GiB (3.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 69D5-9B27 Unmounted: ID-1: /dev/mmcblk0p1 size: 1.84 GiB fs: vfat label: N/A uuid: 78CA-7B16 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:4 info: Dell type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 413c:2107 Device-3: 1-1.3:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb https: //download.webmin.com/download/repository sarge contrib Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 19.5% command: [/usr/share/webm] pid: 15471 mem: 0.00 MiB (0.0%) 2: cpu: 8.8% command: node-red pid: 297 mem: 119.6 MiB (12.9%) 3: cpu: 1.2% command: smartd pid: 14740 mem: 3.17 MiB (0.3%) 4: cpu: 0.3% command: monocle-proxy pid: 440 mem: 0.95 MiB (0.1%) 5: cpu: 0.3% command: packagekitd pid: 14390 mem: 12.7 MiB (1.3%) Memory top: 5 1: mem: 119.6 MiB (12.9%) command: node-red pid: 297 cpu: 8.8% 2: mem: 44.7 MiB (4.8%) command: monocle-gateway pid: 375 cpu: 0.0% 3: mem: 19.0 MiB (2.0%) command: miniserv.pl started by: perl pid: 543 cpu: 0.2% 4: mem: 16.2 MiB (1.7%) command: smbd pid: 565 cpu: 0.0% 5: mem: 12.7 MiB (1.3%) command: packagekitd pid: 14390 cpu: 0.3% Info: Processes: 118 Uptime: 1h 11m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: hmi-server Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=08fe19d4-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 328.0 MiB (32.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 317x86 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 113.63 GiB used: 3.91 GiB (3.4%) 
           ID-1: /dev/mmcblk0 model: SU02G size: 1.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: A-Data model: SSD S511 120GB size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 3.86 GiB (3.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 69D5-9B27 
Unmounted: ID-1: /dev/mmcblk0p1 size: 1.84 GiB fs: vfat label: N/A uuid: 78CA-7B16 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:4 info: Dell type: Keyboard driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s chip ID: 413c:2107 
           Device-3: 1-1.3:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 174c:55aa Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb https: //download.webmin.com/download/repository sarge contrib
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 19.5% command: [/usr/share/webm] pid: 15471 mem: 0.00 MiB (0.0%) 
           2: cpu: 8.8% command: node-red pid: 297 mem: 119.6 MiB (12.9%) 
           3: cpu: 1.2% command: smartd pid: 14740 mem: 3.17 MiB (0.3%) 
           4: cpu: 0.3% command: monocle-proxy pid: 440 mem: 0.95 MiB (0.1%) 
           5: cpu: 0.3% command: packagekitd pid: 14390 mem: 12.7 MiB (1.3%) 
           Memory top: 5 
           1: mem: 119.6 MiB (12.9%) command: node-red pid: 297 cpu: 8.8% 
           2: mem: 44.7 MiB (4.8%) command: monocle-gateway pid: 375 cpu: 0.0% 
           3: mem: 19.0 MiB (2.0%) command: miniserv.pl started by: perl pid: 543 cpu: 0.2% 
           4: mem: 16.2 MiB (1.7%) command: smbd pid: 565 cpu: 0.0% 
           5: mem: 12.7 MiB (1.3%) command: packagekitd pid: 14390 cpu: 0.3% 
Info:      Processes: 118 Uptime: 1h 11m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #10744 - Brand: AData S511