Benchmark #10810 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL64G)
C10
#147 / 1,679
116
#1,472 / 1,679
#59 / 394
840
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-28 08:38:32
#10,810
643
-197 (-30.64%)
cb

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL64G)
C10
59.2G
SD
SanDisk
SL64G
SDXC
3.00
0x03
SD
8.0
02/2015
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
12.9 MB/s
41.11 MB/s
39.41 MB/s
264 IOPS
2,058 IOPS
1,058 KB/s
8,235 KB/s
8,233 KB/s
2,401 KB/s
4,998 KB/s
1,055 KB/s

inxi Results
System: Host: wolke Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 253.5 MiB (6.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 191x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a02:8071:2caa:5b00:ab91:7d2a:400a:eb44/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::6350:7d27:1f8:b95c/64 scope: link WAN IP: 46.223.X.X Drives: Local Storage: total: 525.24 GiB used: 34.76 GiB (6.6%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size: physical: 512 B logical: 512 B scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 1.61 GiB (2.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /mnt/ssd raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 33.10 GiB (7.2%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 78702ff9-2a52-4d2a-8c90-cc6d7174a40e Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.4% command: [kworker/u8:0-events_unbound] pid: 18018 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: bash pid: 19138 mem: 2.44 MiB (0.0%) 3: cpu: 0.1% command: sudo pid: 19133 mem: 2.74 MiB (0.0%) 4: cpu: 0.0% command: systemd pid: 1 mem: 8.25 MiB (0.2%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 19.4 MiB (0.4%) command: systemd-journald pid: 30420 cpu: 0.0% 2: mem: 14.9 MiB (0.3%) command: fail2ban-server started by: python3 pid: 617 cpu: 0.0% 3: mem: 8.25 MiB (0.2%) command: systemd pid: 1 cpu: 0.0% 4: mem: 5.56 MiB (0.1%) command: sshd pid: 619 cpu: 0.0% 5: mem: 5.55 MiB (0.1%) command: sshd: pid: 15552 cpu: 0.0% Info: Processes: 118 Uptime: 15d 16h 18m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: test.sh (sudo) inxi: 3.0.37

inxi Results

System:    Host: wolke Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 253.5 MiB (6.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 191x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2a02:8071:2caa:5b00:ab91:7d2a:400a:eb44/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::6350:7d27:1f8:b95c/64 scope: link 
           WAN IP: 46.223.X.X 
Drives:    Local Storage: total: 525.24 GiB used: 34.76 GiB (6.6%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL64G size: 59.48 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size: physical: 512 B 
           logical: 512 B scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 1.61 GiB (2.8%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /mnt/ssd raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 33.10 GiB (7.2%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: N/A uuid: 78702ff9-2a52-4d2a-8c90-cc6d7174a40e 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge 
           ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.4% command: [kworker/u8:0-events_unbound] pid: 18018 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.3% command: bash pid: 19138 mem: 2.44 MiB (0.0%) 
           3: cpu: 0.1% command: sudo pid: 19133 mem: 2.74 MiB (0.0%) 
           4: cpu: 0.0% command: systemd pid: 1 mem: 8.25 MiB (0.2%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 19.4 MiB (0.4%) command: systemd-journald pid: 30420 cpu: 0.0% 
           2: mem: 14.9 MiB (0.3%) command: fail2ban-server started by: python3 pid: 617 cpu: 0.0% 
           3: mem: 8.25 MiB (0.2%) command: systemd pid: 1 cpu: 0.0% 
           4: mem: 5.56 MiB (0.1%) command: sshd pid: 619 cpu: 0.0% 
           5: mem: 5.55 MiB (0.1%) command: sshd: pid: 15552 cpu: 0.0% 
Info:      Processes: 118 Uptime: 15d 16h 18m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: test.sh (sudo) inxi: 3.0.37

Benchmark #10810 - Brand: SanDisk SD Ultra (SL64G)