Benchmark #10840 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#98 / 1,675
169
#675 / 1,675
#653 / 984
#25 / 69
6,082
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-28 12:38:26
#10,840
1,535
-4,547 (-296.22%)
Anonymous
SSD M2 on raspberry 3+

Storage Details
Transcend MSA Series
SSD (mSATA)
64G
SSD
Transcend
TS64GMSA370
SATA
2.00
480
05e3:0718
0x05e3
0x0718 (IDE/SATA Adapter)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
21.2 MB/s
25.83 MB/s
24.99 MB/s
1,472 IOPS
1,673 IOPS
5,890 KB/s
6,692 KB/s
6,513 KB/s
6,481 KB/s
6,307 KB/s
7,244 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=592 bcm2708_fb.fbheight=448 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=4e3e169c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.5 MiB used: 532.9 MiB (53.2%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 59.63 GiB used: 6.27 GiB (10.5%) ID-1: /dev/sda type: USB vendor: Transcend model: TS64GMSA 370 size: 59.63 GiB block size: physical: 512 B logical: 512 B rev: 0016 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.58 GiB size: 58.60 GiB (98.35%) used: 6.25 GiB (10.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: db9fbdec-9f10-4008-95da-5062491e0659 ID-2: /boot raw size: 42.9 MiB size: 42.2 MiB (98.43%) used: 22.3 MiB (52.9%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 27D9-A951 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Prolific PL2303 Serial Port type: driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 067b:2303 Device-3: 1-1.3:7 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-4: 1-1.4:8 info: Genesys Logic IDE/SATA Adapter type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0718 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb http: //ftp.debian.org/debian stretch-backports main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x stretch main 2: deb-src https: //deb.nodesource.com/node_12.x stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 15.5% command: __main__.py started by: python pid: 24732 mem: 12.4 MiB (1.4%) 2: cpu: 13.0% command: jeecron.php started by: php pid: 23412 mem: 40.4 MiB (4.6%) 3: cpu: 8.6% command: googlecast.py started by: python3 pid: 2076 mem: 23.8 MiB (2.7%) 4: cpu: 7.8% command: mysqld pid: 664 mem: 129.8 MiB (14.8%) 5: cpu: 6.6% command: [kworker/3:0-eve] pid: 31528 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 129.8 MiB (14.8%) command: mysqld pid: 664 cpu: 7.8% 2: mem: 40.4 MiB (4.6%) command: jeecron.php started by: php pid: 23412 cpu: 13.0% 3: mem: 33.8 MiB (3.8%) command: jeecron.php started by: php pid: 24237 cpu: 6.1% 4: mem: 30.7 MiB (3.5%) command: espeasy.js started by: nodejs pid: 2006 cpu: 3.5% 5: mem: 28.7 MiB (3.2%) command: openzwaved.py started by: python pid: 2724 cpu: 1.7% Info: Processes: 171 Uptime: 5d 7h 15m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=592 
           bcm2708_fb.fbheight=448 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 
           root=PARTUUID=4e3e169c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.5 MiB used: 532.9 MiB (53.2%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 59.63 GiB used: 6.27 GiB (10.5%) 
           ID-1: /dev/sda type: USB vendor: Transcend model: TS64GMSA 370 size: 59.63 GiB 
           block size: physical: 512 B logical: 512 B rev: 0016 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.58 GiB size: 58.60 GiB (98.35%) used: 6.25 GiB (10.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: db9fbdec-9f10-4008-95da-5062491e0659 
           ID-2: /boot raw size: 42.9 MiB size: 42.2 MiB (98.43%) used: 22.3 MiB (52.9%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 27D9-A951 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: Prolific PL2303 Serial Port type:  
           driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 067b:2303 
           Device-3: 1-1.3:7 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-4: 1-1.4:8 info: Genesys Logic IDE/SATA Adapter type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0718 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           2: deb http: //ftp.debian.org/debian stretch-backports main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x stretch main
           2: deb-src https: //deb.nodesource.com/node_12.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 15.5% command: __main__.py started by: python pid: 24732 mem: 12.4 MiB (1.4%) 
           2: cpu: 13.0% command: jeecron.php started by: php pid: 23412 mem: 40.4 MiB (4.6%) 
           3: cpu: 8.6% command: googlecast.py started by: python3 pid: 2076 mem: 23.8 MiB (2.7%) 
           4: cpu: 7.8% command: mysqld pid: 664 mem: 129.8 MiB (14.8%) 
           5: cpu: 6.6% command: [kworker/3:0-eve] pid: 31528 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 129.8 MiB (14.8%) command: mysqld pid: 664 cpu: 7.8% 
           2: mem: 40.4 MiB (4.6%) command: jeecron.php started by: php pid: 23412 cpu: 13.0% 
           3: mem: 33.8 MiB (3.8%) command: jeecron.php started by: php pid: 24237 cpu: 6.1% 
           4: mem: 30.7 MiB (3.5%) command: espeasy.js started by: nodejs pid: 2006 cpu: 3.5% 
           5: mem: 28.7 MiB (3.2%) command: openzwaved.py started by: python pid: 2724 cpu: 1.7% 
Info:      Processes: 171 Uptime: 5d 7h 15m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #10840 - Brand: Transcend MSA Series