Benchmark #11039 - pibenchmarks.com

Brand: Samsung SD EVO+ (ED4QT)
C10 U3
#105 / 1,701
186
#1,316 / 1,701
#189 / 405
1,248
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-01 05:35:18
#11,039
1,187
-61 (-5.14%)
WaKaRu
Samsung 128GB EVO Plus Micro SD Card

Secure Digital (SD) Card Details
Samsung SD EVO+ (ED4QT)
C10 U3
119G
SD
Samsung
ED4QT
SDXC
3.00
0x1b
SM
3.0
04/2018
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
28.6 MB/s
38.13 MB/s
29.98 MB/s
1,049 IOPS
2,414 IOPS
4,196 KB/s
9,659 KB/s
6,512 KB/s
3,180 KB/s
6,481 KB/s
3,436 KB/s

inxi Results
System: Host: ubuntu Kernel: 5.3.0-1017-raspi2 armv7l bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 3 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.81 GiB used: 317.2 MiB (8.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 190x45 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 119.25 GiB used: 1.86 GiB (1.6%) ID-1: /dev/mmcblk0 model: ED4QT size: 119.25 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.00 GiB size: 117.12 GiB (98.42%) used: 1.78 GiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: writable uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 80.1 MiB (31.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: system-boot uuid: 7297-5AF9 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: GreenAsia USB to PS/2 Adapter type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:0020 Device-2: 1-1.3:4 info: Microsoft Optical Mouse 200 type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:0797 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 1.2% command: systemd pid: 1 mem: 6.66 MiB (0.1%) 2: cpu: 0.1% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:1h-mm] pid: 345 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: dbus-daemon pid: 1340 mem: 3.20 MiB (0.0%) Memory top: 5 1: mem: 13.8 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 1365 cpu: 0.0% 2: mem: 11.4 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1353 cpu: 0.0% 3: mem: 8.03 MiB (0.2%) command: systemd-journald pid: 2892 cpu: 0.0% 4: mem: 6.66 MiB (0.1%) command: systemd pid: 1 cpu: 1.2% 5: mem: 6.18 MiB (0.1%) command: python3 pid: 28407 cpu: 0.1% Info: Processes: 146 Uptime: 28m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: ubuntu Kernel: 5.3.0-1017-raspi2 armv7l bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable 
           rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 3 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.81 GiB used: 317.2 MiB (8.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 190x45 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.25 GiB used: 1.86 GiB (1.6%) 
           ID-1: /dev/mmcblk0 model: ED4QT size: 119.25 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.00 GiB size: 117.12 GiB (98.42%) used: 1.78 GiB (1.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: writable 
           uuid: 6d33dc75-68ae-4697-b3c3-3dfa0473150a 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 80.1 MiB (31.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
           label: system-boot uuid: 7297-5AF9 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: GreenAsia USB to PS/2 Adapter type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:0020 
           Device-2: 1-1.3:4 info: Microsoft Optical Mouse 200 type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:0797 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 1.2% command: systemd pid: 1 mem: 6.66 MiB (0.1%) 
           2: cpu: 0.1% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/0:1h-mm] pid: 345 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: dbus-daemon pid: 1340 mem: 3.20 MiB (0.0%) 
           Memory top: 5 
           1: mem: 13.8 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1365 cpu: 0.0% 
           2: mem: 11.4 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1353 
           cpu: 0.0% 
           3: mem: 8.03 MiB (0.2%) command: systemd-journald pid: 2892 cpu: 0.0% 
           4: mem: 6.66 MiB (0.1%) command: systemd pid: 1 cpu: 1.2% 
           5: mem: 6.18 MiB (0.1%) command: python3 pid: 28407 cpu: 0.1% 
Info:      Processes: 146 Uptime: 28m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 
           alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #11039 - Brand: Samsung SD EVO+ (ED4QT)