Benchmark #11145 - pibenchmarks.com

Brand: Lexar SD 667X
A1 C10 V10 U1
#249 / 1,701
67
#1,252 / 1,701
#133 / 405
1,381
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-01 21:38:40
#11,145
1,519
+138 (+9.08%)
Anonymous

Secure Digital (SD) Card Details
Lexar SD 667X
A1 C10 V10 U1
29G
SD
Lexar
LX32G
SDHC
5.00
0x9c
SO
1.0
09/2019
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
18.3 MB/s
43.83 MB/s
43.63 MB/s
967 IOPS
4,264 IOPS
3,871 KB/s
17,056 KB/s
13,500 KB/s
3,881 KB/s
10,618 KB/s
4,691 KB/s

inxi Results
System: Host: piplex Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 1000.4 MiB used: 245.4 MiB (24.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x36 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 203.48 GiB used: 60.93 GiB (29.9%) ID-1: /dev/mmcblk0 model: LX32G size: 29.25 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: GPT ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Fit size: 114.61 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.99 GiB size: 28.52 GiB (98.35%) used: 1.43 GiB (5.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/plex raw size: 114.61 GiB size: 114.58 GiB (99.98%) used: 59.44 GiB (51.9%) fs: vfat block size: 512 B dev: /dev/sdb1 label: N/A uuid: 808A-0B5B Unmounted: ID-1: /dev/sda1 size: 59.62 GiB fs: ext4 label: N/A uuid: dc41a727-b0e4-4c66-af66-bc7ee000c3d2 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:3 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5583 Device-2: 2-2:2 info: Lexar Media type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05dc:a83a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.5% command: plex pid: 501 mem: 45.5 MiB (4.9%) 2: cpu: 0.5% command: plex pid: 530 mem: 30.6 MiB (3.3%) 3: cpu: 0.4% command: [kworker/u8:0-events_unbound] pid: 1061 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: plex pid: 600 mem: 28.6 MiB (3.0%) 5: cpu: 0.2% command: init pid: 1 mem: 8.02 MiB (0.8%) Memory top: 5 1: mem: 45.5 MiB (4.9%) command: plex pid: 501 cpu: 0.5% 2: mem: 30.6 MiB (3.3%) command: plex pid: 530 cpu: 0.5% 3: mem: 28.6 MiB (3.0%) command: plex pid: 600 cpu: 0.3% 4: mem: 11.2 MiB (1.2%) command: plex pid: 570 cpu: 0.0% 5: mem: 8.02 MiB (0.8%) command: init pid: 1 cpu: 0.2% Info: Processes: 140 Uptime: 29m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: piplex Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
           Memory:    RAM: total: 1000.4 MiB used: 245.4 MiB (24.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x36 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 203.48 GiB used: 60.93 GiB (29.9%) 
           ID-1: /dev/mmcblk0 model: LX32G size: 29.25 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: GPT 
           ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Fit size: 114.61 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.99 GiB size: 28.52 GiB (98.35%) used: 1.43 GiB (5.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/plex raw size: 114.61 GiB size: 114.58 GiB (99.98%) 
           used: 59.44 GiB (51.9%) fs: vfat block size: 512 B dev: /dev/sdb1 label: N/A 
           uuid: 808A-0B5B 
Unmounted: ID-1: /dev/sda1 size: 59.62 GiB fs: ext4 label: N/A 
           uuid: dc41a727-b0e4-4c66-af66-bc7ee000c3d2 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:3 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5583 Device-2: 2-2:2 info: Lexar Media type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 05dc:a83a Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.5% command: plex pid: 501 mem: 45.5 MiB (4.9%) 
           2: cpu: 0.5% command: plex pid: 530 mem: 30.6 MiB (3.3%) 
           3: cpu: 0.4% command: [kworker/u8:0-events_unbound] pid: 1061 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: plex pid: 600 mem: 28.6 MiB (3.0%) 
           5: cpu: 0.2% command: init pid: 1 mem: 8.02 MiB (0.8%) 
           Memory top: 5 
           1: mem: 45.5 MiB (4.9%) command: plex pid: 501 cpu: 0.5% 
           2: mem: 30.6 MiB (3.3%) command: plex pid: 530 cpu: 0.5% 
           3: mem: 28.6 MiB (3.0%) command: plex pid: 600 cpu: 0.3% 
           4: mem: 11.2 MiB (1.2%) command: plex pid: 570 cpu: 0.0% 
           5: mem: 8.02 MiB (0.8%) command: init pid: 1 cpu: 0.2% 
Info:      Processes: 140 Uptime: 29m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #11145 - Brand: Lexar SD 667X