Benchmark #11214 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,700
931
#433 / 1,700
#417 / 989
#52 / 370
7,549
	Amazon.com AliExpress

Overview
2020-03-02 12:54:06
#11,214
5,392
-2,157 (-40.00%)
parkata
Goldenfir 512 gb en rbpi4 con dietpi

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
SSD
JMicron
JMicronGeneric
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
14.9 MB/s
5,539 IOPS
5,581 IOPS
22,158 KB/s
22,327 KB/s
31,739 KB/s
27,319 KB/s
17,997 KB/s
31,617 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x720M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=74dd73d5-ecbb-4a90-92da-3a2801db8f5f qmap=es Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 326.5 MiB (8.4%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 168x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 565.36 GiB used: 0 KiB (0.0%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 476.94 GiB block size: physical: 4096 B logical: 512 B rev: 2102 scheme: MBR ID-3: /dev/sdb type: USB model: AI Mass size: 58.61 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: Message: No Partition data was found. Unmounted: ID-1: /dev/mmcblk0p1 size: 29.81 GiB fs: vfat label: N/A uuid: 0FCE-065E ID-2: /dev/sda1 size: 127.0 MiB fs: vfat label: N/A uuid: 0FCC-0B9D ID-3: /dev/sda2 size: 476.81 GiB fs: ext4 label: berryboot uuid: 74dd73d5-ecbb-4a90-92da-3a2801db8f5f ID-4: /dev/sdb1 size: 58.60 GiB fs: vfat label: N/A uuid: 0FD4-1316 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: GreenAsia type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:00a8 Device-2: 1-1.4:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 23a9:ef18 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 1.3% command: lib/systemd/systemd pid: 1 mem: 7.95 MiB (0.2%) 2: cpu: 0.3% command: [jbd2/sda2-8] pid: 117 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: systemd-udevd pid: 237 mem: 4.00 MiB (0.1%) 4: cpu: 0.1% command: [kworker/3:2h-kblockd] pid: 405 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.95 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 1.3% 2: mem: 6.66 MiB (0.1%) command: systemd-journald pid: 211 cpu: 0.0% 3: mem: 5.83 MiB (0.1%) command: sshd: pid: 813 cpu: 0.0% 4: mem: 5.35 MiB (0.1%) command: sshd pid: 758 cpu: 0.0% 5: mem: 4.73 MiB (0.1%) command: dhclient pid: 593 cpu: 0.0% Info: Processes: 100 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: DietPi Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x720M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=74dd73d5-ecbb-4a90-92da-3a2801db8f5f qmap=es 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 326.5 MiB (8.4%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 168x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 565.36 GiB used: 0 KiB (0.0%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 476.94 GiB 
           block size: physical: 4096 B logical: 512 B rev: 2102 scheme: MBR 
           ID-3: /dev/sdb type: USB model: AI Mass size: 58.61 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: Message: No Partition data was found. 
Unmounted: ID-1: /dev/mmcblk0p1 size: 29.81 GiB fs: vfat label: N/A uuid: 0FCE-065E 
           ID-2: /dev/sda1 size: 127.0 MiB fs: vfat label: N/A uuid: 0FCC-0B9D 
           ID-3: /dev/sda2 size: 476.81 GiB fs: ext4 label: berryboot 
           uuid: 74dd73d5-ecbb-4a90-92da-3a2801db8f5f 
           ID-4: /dev/sdb1 size: 58.60 GiB fs: vfat label: N/A uuid: 0FD4-1316 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: GreenAsia type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:00a8 
           Device-2: 1-1.4:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.0 speed: 480 Mb/s chip ID: 23a9:ef18 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 1.3% command: lib/systemd/systemd pid: 1 mem: 7.95 MiB (0.2%) 
           2: cpu: 0.3% command: [jbd2/sda2-8] pid: 117 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: systemd-udevd pid: 237 mem: 4.00 MiB (0.1%) 
           4: cpu: 0.1% command: [kworker/3:2h-kblockd] pid: 405 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.95 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 1.3% 
           2: mem: 6.66 MiB (0.1%) command: systemd-journald pid: 211 cpu: 0.0% 
           3: mem: 5.83 MiB (0.1%) command: sshd: pid: 813 cpu: 0.0% 
           4: mem: 5.35 MiB (0.1%) command: sshd pid: 758 cpu: 0.0% 
           5: mem: 4.73 MiB (0.1%) command: dhclient pid: 593 cpu: 0.0% 
Info:      Processes: 100 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #11214 - Brand: Undentified JMicron USB to SATA Adapter