Benchmark #11223 - pibenchmarks.com

Brand: Samsung Fit Plus
USB Flash
#34 / 1,700
478
#926 / 1,700
#5 / 94
#8 / 89
4,460
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-02 13:21:17
#11,223
1,841
-2,619 (-142.26%)
Anonymous
usb

Storage Details
Samsung Fit Plus
USB Flash
119.3G
USB Flash
Samsung
FlashDriveFIT
2.10
480
090c:1000
0x090c
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
250 (-150)
450 (-50)

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
29.3 MB/s
30.98 MB/s
19.81 MB/s
2,258 IOPS
1,560 IOPS
9,035 KB/s
6,241 KB/s
7,032 KB/s
8,367 KB/s
5,187 KB/s
8,950 KB/s

inxi Results
System: Host: ubuntu Kernel: 4.15.0-1041-raspi2 armv7l bits: 32 compiler: gcc v: 7.4.0 parameters: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1000.0 MiB used: 206.9 MiB (20.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: down mac: IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 149.23 GiB used: 6.17 GiB (4.1%) ID-1: /dev/mmcblk0 model: SK32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.26 GiB size: 117.44 GiB (98.47%) used: 6.10 GiB (5.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: 5b958db6-059c-452e-87a8-a172084964b5 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 74.5 MiB (29.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: DC85-8186 Unmounted: ID-1: /dev/mmcblk0p1 size: 29.72 GiB fs: vfat label: SYSTEM-BOOT uuid: 9BB2-EAFD USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:6 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 4007:2800 Device-3: 1-1.2:4 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 090c:1000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 4.9% command: init pid: 1 mem: 5.90 MiB (0.6%) 2: cpu: 2.9% command: stats.py started by: python pid: 1354 mem: 8.75 MiB (0.9%) 3: cpu: 0.7% command: [usb-storage] pid: 150 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: [kworker/2:1] pid: 33 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [kworker/u9:0] pid: 52 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 13.7 MiB (1.4%) command: unattended-upgrade-shutdown started by: python3 pid: 1257 cpu: 0.3% 2: mem: 11.4 MiB (1.2%) command: networkd-dispatcher started by: python3 pid: 1249 cpu: 0.3% 3: mem: 8.75 MiB (0.9%) command: stats.py started by: python pid: 1354 cpu: 2.9% 4: mem: 8.44 MiB (0.9%) command: systemd-journald pid: 666 cpu: 0.4% 5: mem: 5.90 MiB (0.6%) command: init pid: 1 cpu: 4.9% Info: Processes: 137 Uptime: 4m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: ubuntu Kernel: 4.15.0-1041-raspi2 armv7l bits: 32 compiler: gcc v: 7.4.0 
           parameters: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 
           elevator=deadline rootwait 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1000.0 MiB used: 206.9 MiB (20.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: down mac:  
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 149.23 GiB used: 6.17 GiB (4.1%) 
           ID-1: /dev/mmcblk0 model: SK32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.26 GiB size: 117.44 GiB (98.47%) used: 6.10 GiB (5.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: 5b958db6-059c-452e-87a8-a172084964b5 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 74.5 MiB (29.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: DC85-8186 
Unmounted: ID-1: /dev/mmcblk0p1 size: 29.72 GiB fs: vfat label: SYSTEM-BOOT uuid: 9BB2-EAFD 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:6 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 4007:2800 
           Device-3: 1-1.2:4 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 090c:1000 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 4.9% command: init pid: 1 mem: 5.90 MiB (0.6%) 
           2: cpu: 2.9% command: stats.py started by: python pid: 1354 mem: 8.75 MiB (0.9%) 
           3: cpu: 0.7% command: [usb-storage] pid: 150 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: [kworker/2:1] pid: 33 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: [kworker/u9:0] pid: 52 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 13.7 MiB (1.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1257 cpu: 0.3% 
           2: mem: 11.4 MiB (1.2%) command: networkd-dispatcher started by: python3 pid: 1249 
           cpu: 0.3% 
           3: mem: 8.75 MiB (0.9%) command: stats.py started by: python pid: 1354 cpu: 2.9% 
           4: mem: 8.44 MiB (0.9%) command: systemd-journald pid: 666 cpu: 0.4% 
           5: mem: 5.90 MiB (0.6%) command: init pid: 1 cpu: 4.9% 
Info:      Processes: 137 Uptime: 4m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 
           Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #11223 - Brand: Samsung Fit Plus