Benchmark #11804 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
#37 / 1,701
457
#1,175 / 1,701
#79 / 405
1,603
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-08 03:34:18
#11,804
1,369
-234 (-17.09%)
ziaja
Sandisk A2 128GB

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
118.8G
SD
SanDisk
SN128
SDXC
6.00
0x03
SD
8.0
10/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
38.1 MB/s
39.55 MB/s
35.32 MB/s
979 IOPS
2,838 IOPS
3,916 KB/s
11,352 KB/s
9,221 KB/s
2,183 KB/s
7,586 KB/s
3,515 KB/s

inxi Results
System: Host: rpi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=56e3a375-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 282.3 MiB (7.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 159x80 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.200.X.X/24 type: noprefixroute scope: global broadcast: 10.200.X.X IP v6: fe80::f140:b90d:aa53:cb51/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 89.79.X.X Drives: Local Storage: total: 119.08 GiB used: 1.84 GiB (1.5%) ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.83 GiB size: 117.01 GiB (98.47%) used: 1.79 GiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.2% command: pihole-ftl pid: 12484 mem: 22.4 MiB (0.5%) 2: cpu: 0.1% command: sudo pid: 13041 mem: 3.21 MiB (0.0%) 3: cpu: 0.1% command: -bash pid: 13052 mem: 3.77 MiB (0.0%) 4: cpu: 0.1% command: bash pid: 13068 mem: 2.79 MiB (0.0%) 5: cpu: 0.0% command: systemd pid: 1 mem: 8.20 MiB (0.2%) Memory top: 5 1: mem: 22.4 MiB (0.5%) command: pihole-ftl pid: 12484 cpu: 0.2% 2: mem: 22.0 MiB (0.5%) command: systemd-journald pid: 2651 cpu: 0.0% 3: mem: 14.4 MiB (0.3%) command: php-cgi pid: 12271 cpu: 0.0% 4: mem: 8.20 MiB (0.2%) command: systemd pid: 1 cpu: 0.0% 5: mem: 6.56 MiB (0.1%) command: systemd pid: 32196 cpu: 0.0% Info: Processes: 137 Uptime: 34d 10h 22m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.0.37

inxi Results

System:    Host: rpi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=56e3a375-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 282.3 MiB (7.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 159x80 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 10.200.X.X/24 type: noprefixroute scope: global broadcast: 10.200.X.X 
           IP v6: fe80::f140:b90d:aa53:cb51/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 89.79.X.X 
Drives:    Local Storage: total: 119.08 GiB used: 1.84 GiB (1.5%) 
           ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.83 GiB size: 117.01 GiB (98.47%) used: 1.79 GiB (1.5%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.2% command: pihole-ftl pid: 12484 mem: 22.4 MiB (0.5%) 
           2: cpu: 0.1% command: sudo pid: 13041 mem: 3.21 MiB (0.0%) 
           3: cpu: 0.1% command: -bash pid: 13052 mem: 3.77 MiB (0.0%) 
           4: cpu: 0.1% command: bash pid: 13068 mem: 2.79 MiB (0.0%) 
           5: cpu: 0.0% command: systemd pid: 1 mem: 8.20 MiB (0.2%) 
           Memory top: 5 
           1: mem: 22.4 MiB (0.5%) command: pihole-ftl pid: 12484 cpu: 0.2% 
           2: mem: 22.0 MiB (0.5%) command: systemd-journald pid: 2651 cpu: 0.0% 
           3: mem: 14.4 MiB (0.3%) command: php-cgi pid: 12271 cpu: 0.0% 
           4: mem: 8.20 MiB (0.2%) command: systemd pid: 1 cpu: 0.0% 
           5: mem: 6.56 MiB (0.1%) command: systemd pid: 32196 cpu: 0.0% 
Info:      Processes: 137 Uptime: 34d 10h 22m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh inxi: 3.0.37

Benchmark #11804 - Brand: SanDisk SD Extreme A2 (SN128)