Benchmark #11948 - pibenchmarks.com

Brand: KingSpec Z3 Portable Series
SSD (Portable)
#83 / 1,676
206
#436 / 1,676
#422 / 984
#61 / 144
7,439
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-03-09 11:17:11
#11,948
8,524
+1,085 (+12.73%)
Anonymous
Raspi4 with KingSpec Externe SSD

Storage Details
KingSpec Z3 Portable Series
SSD (Portable)
256G
SSD
KingSpec
Z3-256
2.5 inch
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
189 MB/s
290.2 MB/s
275.93 MB/s
8,718 IOPS
20,707 IOPS
34,874 KB/s
82,831 KB/s
30,283 KB/s
27,363 KB/s
24,663 KB/s
33,257 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b7e778ff-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles ip=192.168.X.X::192.168.X.X:255.255.X.X:raspiinstall:eth0:off Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 411.1 MiB (10.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 186x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link IF-ID-3: veth5de77f3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 268.20 GiB used: 29.02 GiB (10.8%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: KingSpec model: KingSpec size: 238.47 GiB block size: physical: 4096 B logical: 512 B rev: 1508 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.47 GiB size: 233.73 GiB (98.01%) used: 14.49 GiB (6.2%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 3d345574-a4bd-471d-8156-65832e40b3ff ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 ID-3: /var/lib/docker/overlay2/589ae29beadbc9cf97f244ac7a13132cd108bf32906dcdf8f916dd5de57903bb/merged raw size: N/A size: 233.73 GiB used: 14.49 GiB (6.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0578:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 10.4% command: perl pid: 661 mem: 75.4 MiB (1.9%) 2: cpu: 1.2% command: init pid: 1 mem: 8.10 MiB (0.2%) 3: cpu: 0.9% command: alexa-fhem started by: node pid: 3700 mem: 47.8 MiB (1.2%) 4: cpu: 0.3% command: dockerd pid: 449 mem: 58.3 MiB (1.4%) 5: cpu: 0.3% command: pihole-ftl pid: 3635 mem: 17.1 MiB (0.4%) Memory top: 5 1: mem: 75.4 MiB (1.9%) command: perl pid: 661 cpu: 10.4% 2: mem: 58.3 MiB (1.4%) command: dockerd pid: 449 cpu: 0.3% 3: mem: 47.8 MiB (1.2%) command: alexa-fhem started by: node pid: 3700 cpu: 0.9% 4: mem: 31.4 MiB (0.8%) command: containerd pid: 447 cpu: 0.1% 5: mem: 17.1 MiB (0.4%) command: pihole-ftl pid: 3635 cpu: 0.3% Info: Processes: 164 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b7e778ff-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           ip=192.168.X.X::192.168.X.X:255.255.X.X:raspiinstall:eth0:off 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 411.1 MiB (10.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 186x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           IF-ID-3: veth5de77f3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 268.20 GiB used: 29.02 GiB (10.8%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: KingSpec model: KingSpec size: 238.47 GiB block size: 
           physical: 4096 B logical: 512 B rev: 1508 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.47 GiB size: 233.73 GiB (98.01%) used: 14.49 GiB (6.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 3d345574-a4bd-471d-8156-65832e40b3ff 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
           ID-3: /var/lib/docker/overlay2/589ae29beadbc9cf97f244ac7a13132cd108bf32906dcdf8f916dd5de57903bb/merged raw size: N/A size: 233.73 GiB used: 14.49 GiB (6.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 0578:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 10.4% command: perl pid: 661 mem: 75.4 MiB (1.9%) 
           2: cpu: 1.2% command: init pid: 1 mem: 8.10 MiB (0.2%) 
           3: cpu: 0.9% command: alexa-fhem started by: node pid: 3700 mem: 47.8 MiB (1.2%) 
           4: cpu: 0.3% command: dockerd pid: 449 mem: 58.3 MiB (1.4%) 
           5: cpu: 0.3% command: pihole-ftl pid: 3635 mem: 17.1 MiB (0.4%) 
           Memory top: 5 
           1: mem: 75.4 MiB (1.9%) command: perl pid: 661 cpu: 10.4% 
           2: mem: 58.3 MiB (1.4%) command: dockerd pid: 449 cpu: 0.3% 
           3: mem: 47.8 MiB (1.2%) command: alexa-fhem started by: node pid: 3700 cpu: 0.9% 
           4: mem: 31.4 MiB (0.8%) command: containerd pid: 447 cpu: 0.1% 
           5: mem: 17.1 MiB (0.4%) command: pihole-ftl pid: 3635 cpu: 0.3% 
Info:      Processes: 164 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #11948 - Brand: KingSpec Z3 Portable Series