Benchmark #12015 - pibenchmarks.com

Brand: Hitachi TravelStar 7200RPM
HDD (2.5" SATA)
#413 / 1,700
28
#1,323 / 1,700
#55 / 69
#14 / 20
1,226
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-03-09 23:47:21
#12,015
742
-484 (-65.23%)
Anonymous
Hitachi 350GB hard disk on USB2

Storage Details
Hitachi TravelStar 7200RPM
HDD (2.5" SATA)
320G
HDD
Hitachi
HTS725032A9A364
SATA
2.00
480
0424:5106
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x5106
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
250 (-150)
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31 MB/s
33.75 MB/s
33.59 MB/s
281 IOPS
167 IOPS
1,127 KB/s
669 KB/s
13,498 KB/s
10,838 KB/s
607 KB/s
1,228 KB/s

inxi Results
System: Host: ShepherdsPi Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.5 MiB used: 380.8 MiB (38.0%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:9 chip ID: 0424:7800 IF: eth0 state: down mac: IF-ID-1: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 312.93 GiB used: 19.47 GiB (6.2%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Hitachi model: HTS725032A9A364 size: 298.09 GiB block size: physical: 512 B logical: 512 B rotation: 7200 rpm rev: PC3O scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 20.00 GiB size: 19.56 GiB (97.81%) used: 13.13 GiB (67.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 9e416eda-34fb-45c1-8460-0012b356e741 ID-2: /boot raw size: 60.0 MiB size: 59.9 MiB (99.91%) used: 35.1 MiB (58.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 35ED-46FE ID-3: /media/disk1 raw size: 140.00 GiB size: 137.68 GiB (98.34%) used: 69.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A uuid: 1e7363d7-a5a4-48df-8eb0-5663b78368d4 ID-4: /media/disk2 raw size: 130.09 GiB size: 127.92 GiB (98.33%) used: 6.22 GiB (4.9%) fs: ext4 block size: 4096 B dev: /dev/sda4 label: N/A uuid: f3beb5e1-6466-499a-b98b-125f642e0d92 ID-5: swap-1 size: 8.00 GiB used: 21.9 MiB (0.3%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda2 label: N/A uuid: c5609075-59c2-4be9-aa2d-36e233d9b473 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.77 GiB fs: ext4 label: N/A uuid: 443559ba-b80f-4fb6-99d9-ddbcd6138fbd USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:9 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Hub: 1-1.1.2:5 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Hub: 1-1.1.X.X:8 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-2: 1-1.1.3:7 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5106 Hub: 1-1.2:4 info: ATEN Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 0557:8021 Device-3: 1-1.2.1:6 info: Logitech Logicool HID-Compliant Keyboard (106 key) type: Keyboard,HID,Mouse driver: hid-generic,usbhid interfaces: 3 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c30f Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/graphics:darktable:stable.list 1: deb http: //download.opensuse.org/repositories/graphics:/darktable:/stable/Debian_Next/ / Active apt repos in: /etc/apt/sources.list.d/mono-official.list 1: deb http: //download.mono-project.com/repo/debian raspbianstretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui staging Processes: CPU top: 5 1: cpu: 1.3% command: init pid: 1 mem: 7.81 MiB (0.8%) 2: cpu: 1.2% command: [kworker/u8:2-brcmf_wq/mmc1:0001:1] pid: 25435 mem: 0.00 MiB (0.0%) 3: cpu: 0.8% command: dbus-daemon pid: 363 mem: 3.68 MiB (0.4%) 4: cpu: 0.4% command: systemd-journald pid: 107 mem: 13.5 MiB (1.5%) 5: cpu: 0.4% command: [kworker/u8:3-events_unbound] pid: 25450 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 59.8 MiB (6.8%) command: mysqld pid: 673 cpu: 0.1% 2: mem: 25.3 MiB (2.8%) command: rpc.mountd pid: 26902 cpu: 0.0% 3: mem: 21.0 MiB (2.4%) command: apache2 pid: 745 cpu: 0.0% 4: mem: 14.9 MiB (1.7%) command: unattended-upgrade-shutdown started by: python3 pid: 477 cpu: 0.0% 5: mem: 13.5 MiB (1.5%) command: systemd-journald pid: 107 cpu: 0.4% Info: Processes: 163 Uptime: 15d 22h 13m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: ShepherdsPi Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.5 MiB used: 380.8 MiB (38.0%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:9 
           chip ID: 0424:7800 
           IF: eth0 state: down mac:  
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 312.93 GiB used: 19.47 GiB (6.2%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Hitachi model: HTS725032A9A364 size: 298.09 GiB 
           block size: physical: 512 B logical: 512 B rotation: 7200 rpm rev: PC3O scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 20.00 GiB size: 19.56 GiB (97.81%) used: 13.13 GiB (67.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 9e416eda-34fb-45c1-8460-0012b356e741 
           ID-2: /boot raw size: 60.0 MiB size: 59.9 MiB (99.91%) used: 35.1 MiB (58.6%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 35ED-46FE 
           ID-3: /media/disk1 raw size: 140.00 GiB size: 137.68 GiB (98.34%) used: 69.0 MiB (0.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A 
           uuid: 1e7363d7-a5a4-48df-8eb0-5663b78368d4 
           ID-4: /media/disk2 raw size: 130.09 GiB size: 127.92 GiB (98.33%) used: 6.22 GiB (4.9%) 
           fs: ext4 block size: 4096 B dev: /dev/sda4 label: N/A 
           uuid: f3beb5e1-6466-499a-b98b-125f642e0d92 
           ID-5: swap-1 size: 8.00 GiB used: 21.9 MiB (0.3%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda2 label: N/A 
           uuid: c5609075-59c2-4be9-aa2d-36e233d9b473 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.77 GiB fs: ext4 label: N/A 
           uuid: 443559ba-b80f-4fb6-99d9-ddbcd6138fbd 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:9 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Hub: 1-1.1.2:5 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Hub: 1-1.1.X.X:8 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1a40:0101 
           Device-2: 1-1.1.3:7 info: ASMedia ASM1051 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5106 
           Hub: 1-1.2:4 info: ATEN Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 0557:8021 
           Device-3: 1-1.2.1:6 info: Logitech Logicool HID-Compliant Keyboard (106 key) 
           type: Keyboard,HID,Mouse driver: hid-generic,usbhid interfaces: 3 rev: 1.1 
           speed: 1.5 Mb/s chip ID: 046d:c30f 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/graphics:darktable:stable.list 
           1: deb http: //download.opensuse.org/repositories/graphics:/darktable:/stable/Debian_Next/ /
           Active apt repos in: /etc/apt/sources.list.d/mono-official.list 
           1: deb http: //download.mono-project.com/repo/debian raspbianstretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui staging
Processes: CPU top: 5 
           1: cpu: 1.3% command: init pid: 1 mem: 7.81 MiB (0.8%) 
           2: cpu: 1.2% command: [kworker/u8:2-brcmf_wq/mmc1:0001:1] pid: 25435 
           mem: 0.00 MiB (0.0%) 
           3: cpu: 0.8% command: dbus-daemon pid: 363 mem: 3.68 MiB (0.4%) 
           4: cpu: 0.4% command: systemd-journald pid: 107 mem: 13.5 MiB (1.5%) 
           5: cpu: 0.4% command: [kworker/u8:3-events_unbound] pid: 25450 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 59.8 MiB (6.8%) command: mysqld pid: 673 cpu: 0.1% 
           2: mem: 25.3 MiB (2.8%) command: rpc.mountd pid: 26902 cpu: 0.0% 
           3: mem: 21.0 MiB (2.4%) command: apache2 pid: 745 cpu: 0.0% 
           4: mem: 14.9 MiB (1.7%) command: unattended-upgrade-shutdown started by: python3 
           pid: 477 cpu: 0.0% 
           5: mem: 13.5 MiB (1.5%) command: systemd-journald pid: 107 cpu: 0.4% 
Info:      Processes: 163 Uptime: 15d 22h 13m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #12015 - Brand: Hitachi TravelStar 7200RPM