Benchmark #12148 - pibenchmarks.com

Brand: Samsung SD EVO+ (GB1QT)
C10 U1
#57 / 1,539
178
#1,252 / 1,539
#226 / 369
1,033
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-11 08:43:53
#12,148
861
-172 (-19.98%)
taisau
pi3b+

Secure Digital (SD) Card Details
Samsung SD EVO+ (GB1QT)
C10 U1
29.6G
SD
Samsung
GB1QT
SDHC
3.00
0x1b
SM
3.0
10/2018
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.9 MB/s
21.92 MB/s
21.87 MB/s
215 IOPS
2,228 IOPS
861 KB/s
8,914 KB/s
7,723 KB/s
2,585 KB/s
7,590 KB/s
1,799 KB/s

inxi Results
System: Host: a Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=c516dbe9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 294.3 MiB (29.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 133x34 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 59.62 GiB used: 2.48 GiB (4.2%) ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Generic model: STORAGE DEVICE size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 0272 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 28.97 GiB (98.01%) used: 2.43 GiB (8.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: d0eb79f1-c010-40bd-99c3-2aac070a08f5 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: B436-8B7B Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 3BD9-E25C ID-2: /dev/sda2 size: 29.56 GiB fs: ext4 label: N/A uuid: f47b6489-9667-4686-96e8-f93f8076e832 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:4 info: Genesys Logic microSD Reader/Writer type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0736 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 7.4% command: node-red pid: 21447 mem: 94.1 MiB (10.1%) 2: cpu: 5.8% command: pigpiod pid: 311 mem: 1.83 MiB (0.1%) 3: cpu: 0.5% command: -bash pid: 6065 mem: 3.76 MiB (0.4%) 4: cpu: 0.3% command: sshd: pid: 5994 mem: 6.22 MiB (0.6%) 5: cpu: 0.3% command: systemd pid: 6037 mem: 7.22 MiB (0.7%) Memory top: 5 1: mem: 94.1 MiB (10.1%) command: node-red pid: 21447 cpu: 7.4% 2: mem: 7.22 MiB (0.7%) command: systemd pid: 6037 cpu: 0.3% 3: mem: 6.22 MiB (0.6%) command: sshd: pid: 5994 cpu: 0.3% 4: mem: 5.82 MiB (0.6%) command: init pid: 1 cpu: 0.0% 5: mem: 5.12 MiB (0.5%) command: sshd: pid: 6059 cpu: 0.1% Info: Processes: 145 Uptime: 3d 22h 09m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: a Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 
           root=PARTUUID=c516dbe9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 294.3 MiB (29.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 133x34 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 59.62 GiB used: 2.48 GiB (4.2%) 
           ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Generic model: STORAGE DEVICE size: 29.81 GiB 
           block size: physical: 512 B logical: 512 B rev: 0272 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 28.97 GiB (98.01%) used: 2.43 GiB (8.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: d0eb79f1-c010-40bd-99c3-2aac070a08f5 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: B436-8B7B 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 3BD9-E25C 
           ID-2: /dev/sda2 size: 29.56 GiB fs: ext4 label: N/A 
           uuid: f47b6489-9667-4686-96e8-f93f8076e832 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:4 info: Genesys Logic microSD Reader/Writer type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0736 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 7.4% command: node-red pid: 21447 mem: 94.1 MiB (10.1%) 
           2: cpu: 5.8% command: pigpiod pid: 311 mem: 1.83 MiB (0.1%) 
           3: cpu: 0.5% command: -bash pid: 6065 mem: 3.76 MiB (0.4%) 
           4: cpu: 0.3% command: sshd: pid: 5994 mem: 6.22 MiB (0.6%) 
           5: cpu: 0.3% command: systemd pid: 6037 mem: 7.22 MiB (0.7%) 
           Memory top: 5 
           1: mem: 94.1 MiB (10.1%) command: node-red pid: 21447 cpu: 7.4% 
           2: mem: 7.22 MiB (0.7%) command: systemd pid: 6037 cpu: 0.3% 
           3: mem: 6.22 MiB (0.6%) command: sshd: pid: 5994 cpu: 0.3% 
           4: mem: 5.82 MiB (0.6%) command: init pid: 1 cpu: 0.0% 
           5: mem: 5.12 MiB (0.5%) command: sshd: pid: 6059 cpu: 0.1% 
Info:      Processes: 145 Uptime: 3d 22h 09m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #12148 - Brand: Samsung SD EVO+ (GB1QT)