Benchmark #12155 - pibenchmarks.com

Brand: PNY Elite Portable
SSD (Portable)
#129 / 1,672
120
#572 / 1,672
#553 / 983
#83 / 144
6,589
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-11 09:34:00
#12,155
8,302
+1,713 (+20.63%)
DMC
Pny portable ssd 240GB

Storage Details
PNY Elite Portable
SSD (Portable)
240G
SSD
PNY
ELITEPSSD
less than 1.8 inch
SATA
3.00
5,000
1d6b:f009
0x1d6b (Linux Foundation)
0xf009
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
199 MB/s
246.35 MB/s
170.29 MB/s
10,567 IOPS
21,717 IOPS
42,270 KB/s
86,871 KB/s
31,839 KB/s
27,836 KB/s
18,355 KB/s
30,085 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@50,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 450.8 MiB (11.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~50Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 253.29 GiB used: 11.59 GiB (4.6%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: PNY model: ELITE PSSD size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.32 GiB size: 219.78 GiB (98.41%) used: 5.81 GiB (2.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.95 GiB (98.23%) used: 5.67 GiB (19.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:5 info: Logitech G3 (MX518) Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c051 Device-2: 1-1.4:4 info: Microsoft Comfort Curve Keyboard 2000 V1.0 type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00dd Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: PNY type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 154b:f009 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 10.8% command: chromium-browser-v7 pid: 935 mem: 130.4 MiB (3.3%) 2: cpu: 8.4% command: chromium-browser-v7 pid: 1354 mem: 82.5 MiB (2.1%) 3: cpu: 7.1% command: chromium-browser-v7 pid: 981 mem: 78.8 MiB (2.0%) 4: cpu: 4.4% command: chromium-browser-v7 pid: 1249 mem: 94.7 MiB (2.4%) 5: cpu: 3.0% command: xorg pid: 495 mem: 46.1 MiB (1.1%) Memory top: 5 1: mem: 130.4 MiB (3.3%) command: chromium-browser-v7 pid: 935 cpu: 10.8% 2: mem: 94.7 MiB (2.4%) command: chromium-browser-v7 pid: 1249 cpu: 4.4% 3: mem: 82.5 MiB (2.1%) command: chromium-browser-v7 pid: 1354 cpu: 8.4% 4: mem: 78.8 MiB (2.0%) command: chromium-browser-v7 pid: 981 cpu: 7.1% 5: mem: 60.2 MiB (1.5%) command: chromium-browser-v7 pid: 1072 cpu: 0.1% Info: Processes: 167 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@50,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 450.8 MiB (11.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1920x1080~50Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 253.29 GiB used: 11.59 GiB (4.6%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: PNY model: ELITE PSSD size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.32 GiB size: 219.78 GiB (98.41%) used: 5.81 GiB (2.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 9969-E3D2 
           ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.95 GiB (98.23%) 
           used: 5.67 GiB (19.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:5 info: Logitech G3 (MX518) Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c051 
           Device-2: 1-1.4:4 info: Microsoft Comfort Curve Keyboard 2000 V1.0 type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00dd 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: PNY type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 154b:f009 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 10.8% command: chromium-browser-v7 pid: 935 mem: 130.4 MiB (3.3%) 
           2: cpu: 8.4% command: chromium-browser-v7 pid: 1354 mem: 82.5 MiB (2.1%) 
           3: cpu: 7.1% command: chromium-browser-v7 pid: 981 mem: 78.8 MiB (2.0%) 
           4: cpu: 4.4% command: chromium-browser-v7 pid: 1249 mem: 94.7 MiB (2.4%) 
           5: cpu: 3.0% command: xorg pid: 495 mem: 46.1 MiB (1.1%) 
           Memory top: 5 
           1: mem: 130.4 MiB (3.3%) command: chromium-browser-v7 pid: 935 cpu: 10.8% 
           2: mem: 94.7 MiB (2.4%) command: chromium-browser-v7 pid: 1249 cpu: 4.4% 
           3: mem: 82.5 MiB (2.1%) command: chromium-browser-v7 pid: 1354 cpu: 8.4% 
           4: mem: 78.8 MiB (2.0%) command: chromium-browser-v7 pid: 981 cpu: 7.1% 
           5: mem: 60.2 MiB (1.5%) command: chromium-browser-v7 pid: 1072 cpu: 0.1% 
Info:      Processes: 167 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #12155 - Brand: PNY Elite Portable