Benchmark #12435 - pibenchmarks.com

Brand: KingSpec Z3 Portable Series
SSD (Portable)
#85 / 1,679
211
#431 / 1,679
#416 / 984
#57 / 144
7,496
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-03-13 21:18:01
#12,435
8,077
+581 (+7.19%)
Anonymous
KingSpec 128 GB SSD on Pi 4

Storage Details
KingSpec Z3 Portable Series
SSD (Portable)
128G
SSD
KingSpec
Z3-128
2.5 inch
SATA
3.00
5,000
0578:0578
0x0578 (Intrinsix Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
191 MB/s
301.15 MB/s
277.39 MB/s
6,956 IOPS
14,787 IOPS
27,826 KB/s
59,148 KB/s
31,398 KB/s
27,500 KB/s
21,973 KB/s
33,664 KB/s

inxi Results
System: Host: pi-master Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:2048x1152M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=561e1a88-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 372.9 MiB (9.4%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x59 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 134.08 GiB used: 3.66 GiB (2.7%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: Z3-128 size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 1214 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.98 GiB size: 116.62 GiB (98.01%) used: 3.60 GiB (3.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 7cf3b7d4-9d20-4556-ab92-ba121e8e1ca1 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B6BB-0F0E Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 638417fb-7220-47b1-883c-e6fee02f51ac ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: B0E9-6189 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0578:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/webupd8team-java.list 1: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main 2: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main Processes: CPU top: 5 1: cpu: 22.0% command: influxd pid: 777 mem: 134.2 MiB (3.3%) 2: cpu: 9.0% command: chronograf pid: 779 mem: 26.3 MiB (0.6%) 3: cpu: 4.2% command: node-red pid: 440 mem: 70.8 MiB (1.7%) 4: cpu: 3.8% command: init pid: 1 mem: 8.16 MiB (0.2%) 5: cpu: 0.7% command: pihole-ftl pid: 859 mem: 18.9 MiB (0.4%) Memory top: 5 1: mem: 134.2 MiB (3.3%) command: influxd pid: 777 cpu: 22.0% 2: mem: 70.8 MiB (1.7%) command: node-red pid: 440 cpu: 4.2% 3: mem: 29.6 MiB (0.7%) command: grafana-server pid: 780 cpu: 0.2% 4: mem: 26.3 MiB (0.6%) command: chronograf pid: 779 cpu: 9.0% 5: mem: 18.9 MiB (0.4%) command: pihole-ftl pid: 859 cpu: 0.7% Info: Processes: 146 Uptime: 2m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: pi-master Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:2048x1152M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=561e1a88-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 372.9 MiB (9.4%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x59 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 134.08 GiB used: 3.66 GiB (2.7%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: Z3-128 size: 119.24 GiB block size: physical: 4096 B 
           logical: 512 B rev: 1214 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.98 GiB size: 116.62 GiB (98.01%) used: 3.60 GiB (3.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 7cf3b7d4-9d20-4556-ab92-ba121e8e1ca1 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B6BB-0F0E 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 638417fb-7220-47b1-883c-e6fee02f51ac 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: B0E9-6189 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 0578:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https: //packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/webupd8team-java.list 
           1: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
           2: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
Processes: CPU top: 5 
           1: cpu: 22.0% command: influxd pid: 777 mem: 134.2 MiB (3.3%) 
           2: cpu: 9.0% command: chronograf pid: 779 mem: 26.3 MiB (0.6%) 
           3: cpu: 4.2% command: node-red pid: 440 mem: 70.8 MiB (1.7%) 
           4: cpu: 3.8% command: init pid: 1 mem: 8.16 MiB (0.2%) 
           5: cpu: 0.7% command: pihole-ftl pid: 859 mem: 18.9 MiB (0.4%) 
           Memory top: 5 
           1: mem: 134.2 MiB (3.3%) command: influxd pid: 777 cpu: 22.0% 
           2: mem: 70.8 MiB (1.7%) command: node-red pid: 440 cpu: 4.2% 
           3: mem: 29.6 MiB (0.7%) command: grafana-server pid: 780 cpu: 0.2% 
           4: mem: 26.3 MiB (0.6%) command: chronograf pid: 779 cpu: 9.0% 
           5: mem: 18.9 MiB (0.4%) command: pihole-ftl pid: 859 cpu: 0.7% 
Info:      Processes: 146 Uptime: 2m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #12435 - Brand: KingSpec Z3 Portable Series