Benchmark #12600 - pibenchmarks.com

Brand: Unidentified ASMedia mSATA to USB Adapter
SSD (mSATA)
#323 / 1,679
42
#462 / 1,679
#446 / 984
#8 / 69
7,286
	Amazon.com AliExpress

Overview
2020-03-15 09:18:08
#12,600
5,871
-1,415 (-24.10%)
Kingo71
SK hynix SC401 SATA 256GB on Pi 4 with USB3 M2 Adapter

Storage Details
Unidentified ASMedia mSATA to USB Adapter
SSD (mSATA)
SSD
Micron
SKhynixSC300M.22280256GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
750 (+250)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
128 MB/s
5,132 IOPS
4,324 IOPS
20,531 KB/s
17,297 KB/s
27,913 KB/s
23,193 KB/s
17,444 KB/s
26,658 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=019a49b1-937e-4ba4-acae-ff1b6c946a21 qmap=it Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 471.8 MiB (12.2%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 268.29 GiB used: 69.8 MiB (0.0%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Micron model: SK hynix SC300 M.2 2280 256GB family: SATA SSDs size: 238.47 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 20100P00 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 148d 4h cycles: 3173 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 29.81 GiB size: 29.80 GiB (99.95%) used: 69.8 MiB (0.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BerryBoot uuid: FE13-F38C Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda2 size: 238.35 GiB fs: ext4 label: berryboot uuid: 019a49b1-937e-4ba4-acae-ff1b6c946a21 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech M105 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 Device-2: 1-1.4:4 info: China Resource Semico type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1a2c:0c21 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 0.5% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 24377 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: xorg pid: 415 mem: 47.1 MiB (1.2%) 3: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 23508 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: vncserver-x11-core pid: 374 mem: 19.5 MiB (0.5%) 5: cpu: 0.1% command: rpimonitord started by: perl pid: 587 mem: 10.9 MiB (0.2%) Memory top: 5 1: mem: 47.1 MiB (1.2%) command: xorg pid: 415 cpu: 0.3% 2: mem: 28.7 MiB (0.7%) command: lxpanel pid: 694 cpu: 0.0% 3: mem: 20.2 MiB (0.5%) command: pcmanfm pid: 695 cpu: 0.0% 4: mem: 19.5 MiB (0.5%) command: vncserver-x11-core pid: 374 cpu: 0.1% 5: mem: 17.6 MiB (0.4%) command: vncserverui pid: 807 cpu: 0.0% Info: Processes: 157 Uptime: 7h 52m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=019a49b1-937e-4ba4-acae-ff1b6c946a21 qmap=it 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 471.8 MiB (12.2%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 268.29 GiB used: 69.8 MiB (0.0%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Micron model: SK hynix SC300 M.2 2280 256GB 
           family: SATA SSDs size: 238.47 GiB block size: physical: 512 B logical: 512 B sata: 3.1 
           speed: 6.0 Gb/s rev: 20100P00 temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 148d 4h cycles: 3173 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 29.81 GiB size: 29.80 GiB (99.95%) used: 69.8 MiB (0.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: BerryBoot uuid: FE13-F38C 
Unmounted: ID-1: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda2 size: 238.35 GiB fs: ext4 label: berryboot 
           uuid: 019a49b1-937e-4ba4-acae-ff1b6c946a21 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077 
           Device-2: 1-1.4:4 info: China Resource Semico type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1a2c:0c21 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 0.5% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 24377 
           mem: 0.00 MiB (0.0%) 
           2: cpu: 0.3% command: xorg pid: 415 mem: 47.1 MiB (1.2%) 
           3: cpu: 0.3% command: [kworker/u8:3-events_unbound] pid: 23508 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: vncserver-x11-core pid: 374 mem: 19.5 MiB (0.5%) 
           5: cpu: 0.1% command: rpimonitord started by: perl pid: 587 mem: 10.9 MiB (0.2%) 
           Memory top: 5 
           1: mem: 47.1 MiB (1.2%) command: xorg pid: 415 cpu: 0.3% 
           2: mem: 28.7 MiB (0.7%) command: lxpanel pid: 694 cpu: 0.0% 
           3: mem: 20.2 MiB (0.5%) command: pcmanfm pid: 695 cpu: 0.0% 
           4: mem: 19.5 MiB (0.5%) command: vncserver-x11-core pid: 374 cpu: 0.1% 
           5: mem: 17.6 MiB (0.4%) command: vncserverui pid: 807 cpu: 0.0% 
Info:      Processes: 157 Uptime: 7h 52m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #12600 - Brand: Unidentified ASMedia mSATA to USB Adapter