Benchmark #126721 - pibenchmarks.com

Brand: Samsung Fit Plus
USB Flash
#29 / 1,678
464
#912 / 1,678
#4 / 93
#8 / 89
4,484
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2025-09-12 00:46:13
#126,721
1,999
-2,485 (-124.31%)
Anonymous

Storage Details
Samsung Fit Plus
USB Flash
119.5G
USB Flash
Samsung
FlashDriveFIT
2.10
480
04e8:6300
0x04e8 (Samsung Electronics Co., Ltd)
0x6300 (Pirelli Remote NDIS Device)
usb-storage
None

System Board Details

Raspberry Pi 500 Rev 1.0
Raspberry Pi Foundation
N/A
4
2,900
900

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
29.2 MB/s
35.43 MB/s
28.22 MB/s
1,401 IOPS
1,392 IOPS
5,606 KB/s
5,571 KB/s
7,841 KB/s
11,213 KB/s
5,464 KB/s
10,980 KB/s

inxi Results
System: Host: raspberrypi Kernel: 6.12.34+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=55531020-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE quiet splash plymouth.ignore-serial-consoles Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 500 Rev 1.0 details: N/A rev: d04190 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.77 GiB used: 4.55 GiB (58.6%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2900 min/max: 1500/2900 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2900 2: 2900 3: 2900 4: 2900 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: wayfire v: 0.7.5 driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 Monitor-1: HDMI-A-1 model: RPI MON156 built: 2023 res: 1920x1080 dpi: 139 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 350x190mm (13.78x7.48") diag: 398mm (15.7") ratio: 16:9 modes: 1920x1080, 1280x720, 720x576, 720x480, 640x480 EDID-Warnings: 1: parse_edid: unhandled CEA mode 108 2: parse_edid: unhandled CEA mode 111 API: EGL v: 1.5 hw: drv: broadcom v3d platforms: device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4 drv: v3d inactive: wayland API: OpenGL v: 3.1 vendor: broadcom mesa v: 24.2.8-1~bpo12+rpt3 glx-v: 1.4 es-v: 3.1 direct-render: yes renderer: V3D 7.1.X.X device-ID: 14e4:ffffffff memory: 7.58 GiB unified: yes API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu name: V3D 7.1.X.X driver: mesa v3dv v: 24.2.8-1~bpo12+rpt3 device-ID: 14e4:55701c33 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 24.2.8-1~bpo12+rpt3 (LLVM 15.0.6) device-ID: 10005:0000 surfaces: xcb,xlib Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.12.34+rpt-rpi-v8 status: kernel-api with: osspd status: off tools: alsactl,alsamixer,amixer Server-1: JACK v: 0.126.0 status: off tools: qjackctl Server-2: PipeWire v: 1.2.7 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl Server-3: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::42:aff:fec4:a880/64 scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::57bc:58f0:d755:b1f9/64 type: noprefixroute scope: link IF-ID-3: vethb29aa3f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 80.187.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 1.49 TiB used: 1.18 TiB (79.1%) ID-1: /dev/sda maj-min: 8:0 vendor: Realtek model: RTL9210 NVME size: 476.94 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD drive fw-rev: 1.00 drive-rev: 1.4.X.X temp: 45 Celsius C scheme: MBR SMART: yes health: PASSED on: 5d 14h cycles: 183 read-units: 9,399,083 [4.81 TB] written-units: 4,224,168 [2.16 TB] ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD Elements 10B8 drive model: WD10JMVW-11AJGS2 family: Elements / My Passport (USB, AF) size: 931.48 GiB block-size: physical: 4096 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.0 speed: 3.0 Gb/s tech: HDD rpm: 5400 drive WD-WXE1A2561NYX fw-rev: 1012 drive-rev: 01.01A01 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 9d 20h cycles: 6978 ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: Flash Drive FIT size: 119.51 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: SSD fw-rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 476.44 GiB size: 467.89 GiB (98.21%) used: 290.38 GiB (62.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: d4ba6ec5-aeed-4cda-967b-d004c1b2cb5c ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 70.1 MiB (13.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: 8A12-3570 ID-3: /media/hartmut/40DA21EEDA21E1405 raw-size: 931.48 GiB size: 931.48 GiB (100.00%) used: 917.92 GiB (98.5%) fs: ntfs block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 40DA21EEDA21E140 ID-4: /media/hartmut/Samsung USB raw-size: 119.51 GiB size: 119.5 GiB (100.00%) used: 1.8 MiB (0.0%) fs: exfat block-size: 512 B dev: /dev/sdc1 maj-min: 8:33 label: Samsung USB uuid: 64A5-F009 ID-5: /zram raw-size: 31.06 GiB size: 30.4 GiB (97.88%) used: 24 KiB (0.0%) fs: ext4 block-size: 4096 B dev: /dev/zram2 maj-min: 253:2 label: N/A uuid: N/A Swap: Kernel: swappiness: 100 (default 60) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 31.06 GiB used: 572.5 MiB (1.8%) priority: 1 comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram1 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Raspberry Pi USB3 HUB ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2e8a:000d class-ID: 0900 Device-1: 1-1.2:6 info: Samsung Flash Drive FIT type: mass storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 300mA chip-ID: 04e8:6300 class-ID: 0806 Device-2: 1-2:3 info: Pixart Imaging Optical Mouse type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 2-1:2 info: Raspberry Pi USB3 HUB ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2e8a:000e class-ID: 0900 Device-1: 2-1.1:3 info: Western Digital Elements Portable (WDBU6Y WDBUZG) type: mass storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 1058:10b8 class-ID: 0806 Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: Raspberry Pi 500 Keyboard type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA chip-ID: 2e8a:0010 class-ID: 0300 Hub-6: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 4-1:2 info: Realtek RTL9210 M.2 NVME Adapter type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: System Temperatures: cpu: 56.6 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: 4799 pm: dpkg pkgs: 4725 libs: 2569 tools: apt,apt-get,gnome-software,synaptic pm: rpm pkgs: 0 pm: flatpak pkgs: 51 pm: snap pkgs: 23 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list 1: deb http://deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/debian bookworm stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 1: deb [arch=arm64] https://repo.vivaldi.com/stable/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/adoptium.sources 1: deb https://adoptium.jfrog.io/artifactory/deb bookworm main Active apt repos in: /etc/apt/sources.list.d/box64.sources 1: deb https://Pi-Apps-Coders.github.io/box64-debs/debian ./ Active apt repos in: /etc/apt/sources.list.d/box86.sources 1: deb https://Pi-Apps-Coders.github.io/box86-debs/debian ./ Active apt repos in: /etc/apt/sources.list.d/sublimehq.sources 1: deb https://download.sublimetext.com/ apt/stable/ Processes: CPU top: 5 of 309 1: cpu: 4.9% command: floorp pid: 8850 mem: 418.3 MiB (5.2%) 2: cpu: 4.1% command: wayfire pid: 1504 mem: 188.0 MiB (2.3%) 3: cpu: 3.8% command: thunderbird pid: 12761 mem: 416.9 MiB (5.2%) 4: cpu: 3.6% command: /et started-by: et pid: 7738 mem: 340.2 MiB (4.2%) 5: cpu: 2.4% command: floorp pid: 9501 mem: 430.1 MiB (5.4%) Memory top: 5 of 309 1: mem: 430.1 MiB (5.4%) command: floorp pid: 9501 cpu: 2.4% 2: mem: 420.3 MiB (5.2%) command: floorp pid: 9023 cpu: 2.2% 3: mem: 418.3 MiB (5.2%) command: floorp pid: 8850 cpu: 4.9% 4: mem: 416.9 MiB (5.2%) command: thunderbird pid: 12761 cpu: 3.8% 5: mem: 340.2 MiB (4.2%) command: /et started-by: et pid: 7738 cpu: 3.6% Info: Processes: 309 Uptime: 2h 0m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 clang: 14.0.6 Shell: Storage.sh (sudo) default: Bash v: 5.2.15 running-in: Storage.sh inxi: 3.3.31

inxi Results

System:
  Host: raspberrypi Kernel: 6.12.34+rpt-rpi-v8 arch: aarch64 bits: 64
    compiler: N/A clocksource: arch_sys_counter parameters: reboot=w
    coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8
    system_heap.max_order=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    console=ttyAMA10,115200 console=tty1 root=PARTUUID=55531020-02
    rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
    quiet splash plymouth.ignore-serial-consoles
  Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 500 Rev 1.0 details: N/A rev: d04190
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.77 GiB used: 4.55 GiB (58.6%)
    igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 512 KiB
    desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB
    desc: 1x2 MiB
  Speed (MHz): avg: 2900 min/max: 1500/2900 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 2900 2: 2900 3: 2900 4: 2900 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9
    compositor: wayfire v: 0.7.5 driver: X: loaded: modesetting unloaded: fbdev
    dri: vc4
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0
  Monitor-1: HDMI-A-1 model: RPI MON156 built: 2023
    res: 1920x1080 dpi: 139 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green:
    x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329
    size: 350x190mm (13.78x7.48") diag: 398mm (15.7") ratio: 16:9
    modes: 1920x1080, 1280x720, 720x576, 720x480, 640x480
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 108 2: parse_edid:
    unhandled CEA mode 111
  API: EGL v: 1.5 hw: drv: broadcom v3d platforms: device: 0 egl: 1.4
    drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4
    drv: v3d x11: egl: 1.4 drv: v3d inactive: wayland
  API: OpenGL v: 3.1 vendor: broadcom mesa v: 24.2.8-1~bpo12+rpt3 glx-v: 1.4
    es-v: 3.1 direct-render: yes renderer: V3D 7.1.X.X device-ID: 14e4:ffffffff
    memory: 7.58 GiB unified: yes
  API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu
    name: V3D 7.1.X.X driver: mesa v3dv v: 24.2.8-1~bpo12+rpt3
    device-ID: 14e4:55701c33 surfaces: xcb,xlib device: 1 type: cpu
    name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe
    v: 24.2.8-1~bpo12+rpt3 (LLVM 15.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.12.34+rpt-rpi-v8 status: kernel-api with: osspd
    status: off tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 0.126.0 status: off tools: qjackctl
  Server-2: PipeWire v: 1.2.7 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active 3: pw-jack
    type: plugin tools: pw-cat,pw-cli,wpctl
  Server-3: PulseAudio v: 16.1 status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel
    port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
  IP v6: fe80::42:aff:fec4:a880/64 scope: link
  IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::57bc:58f0:d755:b1f9/64 type: noprefixroute scope: link
  IF-ID-3: vethb29aa3f state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  WAN IP: 80.187.X.X
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio,
    telephony
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.49 TiB used: 1.18 TiB (79.1%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Realtek model: RTL9210 NVME
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD
    drive fw-rev: 1.00
    drive-rev: 1.4.X.X temp: 45 Celsius C scheme: MBR
  SMART: yes health: PASSED on: 5d 14h cycles: 183
    read-units: 9,399,083 [4.81 TB] written-units: 4,224,168 [2.16 TB]
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
    model: WD Elements 10B8 drive model: WD10JMVW-11AJGS2 family: Elements / My
    Passport (USB, AF) size: 931.48 GiB block-size: physical: 4096 B
    logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    sata: 3.0 speed: 3.0 Gb/s tech: HDD rpm: 5400
    drive WD-WXE1A2561NYX
    fw-rev: 1012 drive-rev: 01.01A01 temp: 32 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 2y 9d 20h cycles: 6978
  ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: Flash Drive FIT
    size: 119.51 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: SSD
    fw-rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 476.44 GiB size: 467.89 GiB (98.21%)
    used: 290.38 GiB (62.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2
    maj-min: 8:2 label: rootfs uuid: d4ba6ec5-aeed-4cda-967b-d004c1b2cb5c
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%)
    used: 70.1 MiB (13.7%) fs: vfat block-size: 512 B dev: /dev/sda1
    maj-min: 8:1 label: bootfs uuid: 8A12-3570
  ID-3: /media/hartmut/40DA21EEDA21E1405 raw-size: 931.48 GiB
    size: 931.48 GiB (100.00%) used: 917.92 GiB (98.5%) fs: ntfs
    block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A
    uuid: 40DA21EEDA21E140
  ID-4: /media/hartmut/Samsung USB raw-size: 119.51 GiB
    size: 119.5 GiB (100.00%) used: 1.8 MiB (0.0%) fs: exfat block-size: 512 B
    dev: /dev/sdc1 maj-min: 8:33 label: Samsung USB uuid: 64A5-F009
  ID-5: /zram raw-size: 31.06 GiB size: 30.4 GiB (97.88%)
    used: 24 KiB (0.0%) fs: ext4 block-size: 4096 B dev: /dev/zram2
    maj-min: 253:2 label: N/A uuid: N/A
Swap:
  Kernel: swappiness: 100 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 31.06 GiB used: 572.5 MiB (1.8%) priority: 1
    comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram1
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 1-1:2 info: Raspberry Pi USB3 HUB ports: 4 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2e8a:000d
    class-ID: 0900
  Device-1: 1-1.2:6 info: Samsung Flash Drive FIT type: mass storage
    driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 300mA chip-ID: 04e8:6300 class-ID: 0806
      Device-2: 1-2:3 info: Pixart Imaging Optical Mouse type: mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 093a:2510 class-ID: 0301
  Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-4: 2-1:2 info: Raspberry Pi USB3 HUB ports: 4 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2e8a:000e
    class-ID: 0900
  Device-1: 2-1.1:3 info: Western Digital Elements Portable (WDBU6Y WDBUZG)
    type: mass storage driver: usb-storage interfaces: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
    chip-ID: 1058:10b8 class-ID: 0806   Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-2:2 info: Raspberry Pi 500 Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 2e8a:0010 class-ID: 0300
  Hub-6: 4-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 4-1:2 info: Realtek RTL9210 M.2 NVME Adapter type: mass storage
    driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 power: 896mA chip-ID: 0bda:9210 class-ID: 0806
    Sensors:
  System Temperatures: cpu: 56.6 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: 4799 pm: dpkg pkgs: 4725 libs: 2569
    tools: apt,apt-get,gnome-software,synaptic pm: rpm pkgs: 0 pm: flatpak
    pkgs: 51 pm: snap pkgs: 23
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list
    1: deb http://deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/debian bookworm stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
  Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
    1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
  Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
    1: deb [arch=arm64] https://repo.vivaldi.com/stable/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/adoptium.sources
    1: deb https://adoptium.jfrog.io/artifactory/deb bookworm main
  Active apt repos in: /etc/apt/sources.list.d/box64.sources
    1: deb https://Pi-Apps-Coders.github.io/box64-debs/debian ./
  Active apt repos in: /etc/apt/sources.list.d/box86.sources
    1: deb https://Pi-Apps-Coders.github.io/box86-debs/debian ./
  Active apt repos in: /etc/apt/sources.list.d/sublimehq.sources
    1: deb https://download.sublimetext.com/ apt/stable/
Processes:
  CPU top: 5 of 309
  1: cpu: 4.9% command: floorp pid: 8850 mem: 418.3 MiB (5.2%)
  2: cpu: 4.1% command: wayfire pid: 1504 mem: 188.0 MiB (2.3%)
  3: cpu: 3.8% command: thunderbird pid: 12761 mem: 416.9 MiB (5.2%)
  4: cpu: 3.6% command: /et started-by: et pid: 7738 mem: 340.2 MiB (4.2%)
  5: cpu: 2.4% command: floorp pid: 9501 mem: 430.1 MiB (5.4%)
  Memory top: 5 of 309
  1: mem: 430.1 MiB (5.4%) command: floorp pid: 9501 cpu: 2.4%
  2: mem: 420.3 MiB (5.2%) command: floorp pid: 9023 cpu: 2.2%
  3: mem: 418.3 MiB (5.2%) command: floorp pid: 8850 cpu: 4.9%
  4: mem: 416.9 MiB (5.2%) command: thunderbird pid: 12761 cpu: 3.8%
  5: mem: 340.2 MiB (4.2%) command: /et started-by: et pid: 7738 cpu: 3.6%
Info:
  Processes: 309 Uptime: 2h 0m Init: systemd v: 252 target: graphical (5)
  default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  clang: 14.0.6 Shell: Storage.sh (sudo) default: Bash v: 5.2.15
  running-in: Storage.sh inxi: 3.3.31

Benchmark #126721 - Brand: Samsung Fit Plus