Benchmark #12689 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,829
#367 / 1,700
#354 / 989
#34 / 370
8,269
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-16 08:31:24
#12,689
2,684
-5,585 (-208.08%)
Sandisk 120G
Sandisk 120G SSD on Pi 3B+ using LogiLink SATA to USB adapter

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
2.00
480
0424:0578
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.8 MB/s
34.94 MB/s
34.31 MB/s
2,947 IOPS
2,475 IOPS
11,788 KB/s
9,900 KB/s
17,596 KB/s
15,415 KB/s
9,855 KB/s
12,694 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=0008a492-07 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 468.6 MiB (46.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: down mac: IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 126.28 GiB used: 15.29 GiB (12.1%) ID-1: /dev/mmcblk0 model: SA16G size: 14.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120 GB size: 111.80 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0301 drive rev: UE3000RL temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 8d 22h cycles: 430 read: 76 KiB written: 33 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 109.14 GiB size: 107.30 GiB (98.31%) used: 15.24 GiB (14.2%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: 4b4f7974-edda-46c2-bb3d-f4b11c9ff7fb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot uuid: 020B-9265 ID-3: /media/pi/22FA-3531 raw size: 14.48 GiB size: 14.47 GiB (99.90%) used: 8 KiB (0.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 22FA-3531 Unmounted: ID-1: /dev/sda1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: 9D27-18F7 ID-2: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: f1a072a7-77ec-4313-a693-75fa80409c71 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.3:4 info: Logitech Unifying Receiver type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 Device-3: 1-1.5:5 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 33.5% command: chromium-browser-v7 pid: 1456 mem: 108.4 MiB (11.7%) 2: cpu: 18.1% command: chromium-browser-v7 pid: 1083 mem: 142.3 MiB (15.3%) 3: cpu: 14.8% command: chromium-browser-v7 pid: 1468 mem: 83.4 MiB (9.0%) 4: cpu: 8.6% command: chromium-browser-v7 pid: 1136 mem: 99.5 MiB (10.7%) 5: cpu: 3.9% command: xorg pid: 453 mem: 85.2 MiB (9.1%) Memory top: 5 1: mem: 142.3 MiB (15.3%) command: chromium-browser-v7 pid: 1083 cpu: 18.1% 2: mem: 108.4 MiB (11.7%) command: chromium-browser-v7 pid: 1456 cpu: 33.5% 3: mem: 99.5 MiB (10.7%) command: chromium-browser-v7 pid: 1136 cpu: 8.6% 4: mem: 85.2 MiB (9.1%) command: xorg pid: 453 cpu: 3.9% 5: mem: 83.4 MiB (9.0%) command: chromium-browser-v7 pid: 1468 cpu: 14.8% Info: Processes: 160 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=0008a492-07 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 468.6 MiB (46.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: down mac:  
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 126.28 GiB used: 15.29 GiB (12.1%) 
           ID-1: /dev/mmcblk0 model: SA16G size: 14.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120 GB size: 111.80 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0301 drive rev: UE3000RL temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 8d 22h cycles: 430 read: 76 KiB 
           written: 33 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 109.14 GiB size: 107.30 GiB (98.31%) used: 15.24 GiB (14.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda7 label: root 
           uuid: 4b4f7974-edda-46c2-bb3d-f4b11c9ff7fb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda6 label: boot uuid: 020B-9265 
           ID-3: /media/pi/22FA-3531 raw size: 14.48 GiB size: 14.47 GiB (99.90%) 
           used: 8 KiB (0.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A 
           uuid: 22FA-3531 
Unmounted: ID-1: /dev/sda1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: 9D27-18F7 
           ID-2: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: f1a072a7-77ec-4313-a693-75fa80409c71 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.3:4 info: Logitech Unifying Receiver type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 
           Device-3: 1-1.5:5 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 33.5% command: chromium-browser-v7 pid: 1456 mem: 108.4 MiB (11.7%) 
           2: cpu: 18.1% command: chromium-browser-v7 pid: 1083 mem: 142.3 MiB (15.3%) 
           3: cpu: 14.8% command: chromium-browser-v7 pid: 1468 mem: 83.4 MiB (9.0%) 
           4: cpu: 8.6% command: chromium-browser-v7 pid: 1136 mem: 99.5 MiB (10.7%) 
           5: cpu: 3.9% command: xorg pid: 453 mem: 85.2 MiB (9.1%) 
           Memory top: 5 
           1: mem: 142.3 MiB (15.3%) command: chromium-browser-v7 pid: 1083 cpu: 18.1% 
           2: mem: 108.4 MiB (11.7%) command: chromium-browser-v7 pid: 1456 cpu: 33.5% 
           3: mem: 99.5 MiB (10.7%) command: chromium-browser-v7 pid: 1136 cpu: 8.6% 
           4: mem: 85.2 MiB (9.1%) command: xorg pid: 453 cpu: 3.9% 
           5: mem: 83.4 MiB (9.0%) command: chromium-browser-v7 pid: 1468 cpu: 14.8% 
Info:      Processes: 160 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #12689 - Brand: SanDisk SSD Plus