Benchmark #12862 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#14 / 1,672
692
#1,174 / 1,672
#82 / 389
1,506
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-18 05:53:38
#12,862
1,469
-37 (-2.52%)
LS
SanDisk Extreme 64GB on Pi 4

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
30.5G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
01/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
4 GB
1,600
50

Operating System

Raspbian GNU/Linux bullseye/sid
armv7l

Benchmark Results
35.9 MB/s
38.25 MB/s
40.38 MB/s
1,192 IOPS
2,932 IOPS
4,771 KB/s
11,729 KB/s
9,585 KB/s
2,347 KB/s
8,371 KB/s
4,203 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:2560x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux bullseye/sid Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 886.8 MiB (22.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.7 driver: modesetting unloaded: fbdev resolution: 2560x1080~60Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2003:ee:370b:3341:7aa:e008:597b:ebec/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::3f21:74c:fe2e:feeb/64 scope: link WAN IP: 84.167.X.X Drives: Local Storage: total: 59.48 GiB used: 5.09 GiB (8.6%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 30.50 GiB size: 29.90 GiB (98.02%) used: 4.21 GiB (14.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 0e84b52a-8809-431b-aa2d-befc5c38d910 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 394A-BB88 ID-3: /media/pi/Storage raw size: 28.13 GiB size: 27.56 GiB (97.98%) used: 429.4 MiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage uuid: 416de3fd-2610-4488-a26c-71073c20d88c ID-4: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) used: 419.0 MiB (81.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System uuid: 4722-8DB5 Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 0052-37C3 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 96e26565-c9f4-44bf-8830-6d891b458819 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: N/A type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 24ae:2000 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ testing main contrib non-free rpi 2: deb-src http://raspbian.raspberrypi.org/raspbian/ testing main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 96.4% command: chromium-browser-v7 pid: 21316 mem: 447.6 MiB (11.4%) 2: cpu: 16.0% command: storage.sh started by: mousepad pid: 21880 mem: 29.6 MiB (0.7%) 3: cpu: 3.7% command: chromium-browser-v7 pid: 4167 mem: 125.3 MiB (3.2%) 4: cpu: 3.2% command: chromium-browser-v7 pid: 4259 mem: 79.2 MiB (2.0%) 5: cpu: 2.5% command: [kworker/u8:3-events_unbound] pid: 23212 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 447.6 MiB (11.4%) command: chromium-browser-v7 pid: 21316 cpu: 96.4% 2: mem: 125.3 MiB (3.2%) command: chromium-browser-v7 pid: 4167 cpu: 3.7% 3: mem: 99.0 MiB (2.5%) command: chromium-browser-v7 pid: 4381 cpu: 0.5% 4: mem: 79.2 MiB (2.0%) command: chromium-browser-v7 pid: 4259 cpu: 3.2% 5: mem: 51.9 MiB (1.3%) command: chromium-browser-v7 pid: 4262 cpu: 0.8% Info: Processes: 160 Uptime: 1h 23m Init: systemd v: 244 runlevel: 5 target: graphical.target Compilers: gcc: 9.2.1 alt: 8/9 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.0.38

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
  video=HDMI-A-1:2560x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes 
  rootwait quiet splash plymouth.ignore-serial-consoles 
  Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
  Distro: Raspbian GNU/Linux bullseye/sid 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 
  rev: c03111 
Memory:
  RAM: total: 3.89 GiB used: 886.8 MiB (22.3%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.Org 1.20.7 driver: modesetting unloaded: fbdev 
  resolution: 2560x1080~60Hz 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.97-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: 2003:ee:370b:3341:7aa:e008:597b:ebec/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: fe80::3f21:74c:fe2e:feeb/64 scope: link 
  WAN IP: 84.167.X.X 
Drives:
  Local Storage: total: 59.48 GiB used: 5.09 GiB (8.6%) 
  ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 30.50 GiB size: 29.90 GiB (98.02%) 
  used: 4.21 GiB (14.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 
  label: root uuid: 0e84b52a-8809-431b-aa2d-befc5c38d910 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 
  label: boot uuid: 394A-BB88 
  ID-3: /media/pi/Storage raw size: 28.13 GiB size: 27.56 GiB (97.98%) 
  used: 429.4 MiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 
  label: Storage uuid: 416de3fd-2610-4488-a26c-71073c20d88c 
  ID-4: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) 
  used: 419.0 MiB (81.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 
  label: System uuid: 4722-8DB5 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY 
  uuid: 0052-37C3 
  ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
  ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
  uuid: 96e26565-c9f4-44bf-8830-6d891b458819 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Device-1: 1-1.3:3 info: N/A type: Keyboard,Mouse 
  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s 
  chip ID: 24ae:2000 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
Sensors:
  Message: No sensors data was found. Is sensors configured? 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ testing main contrib non-free rpi
  2: deb-src http://raspbian.raspberrypi.org/raspbian/ testing main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 96.4% command: chromium-browser-v7 pid: 21316 
  mem: 447.6 MiB (11.4%) 
  2: cpu: 16.0% command: storage.sh started by: mousepad pid: 21880 
  mem: 29.6 MiB (0.7%) 
  3: cpu: 3.7% command: chromium-browser-v7 pid: 4167 mem: 125.3 MiB (3.2%) 
  4: cpu: 3.2% command: chromium-browser-v7 pid: 4259 mem: 79.2 MiB (2.0%) 
  5: cpu: 2.5% command: [kworker/u8:3-events_unbound] pid: 23212 
  mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 447.6 MiB (11.4%) command: chromium-browser-v7 pid: 21316 
  cpu: 96.4% 
  2: mem: 125.3 MiB (3.2%) command: chromium-browser-v7 pid: 4167 cpu: 3.7% 
  3: mem: 99.0 MiB (2.5%) command: chromium-browser-v7 pid: 4381 cpu: 0.5% 
  4: mem: 79.2 MiB (2.0%) command: chromium-browser-v7 pid: 4259 cpu: 3.2% 
  5: mem: 51.9 MiB (1.3%) command: chromium-browser-v7 pid: 4262 cpu: 0.8% 
Info:
  Processes: 160 Uptime: 1h 23m Init: systemd v: 244 runlevel: 5 
  target: graphical.target Compilers: gcc: 9.2.1 alt: 8/9 
  Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.0.38

Benchmark #12862 - Brand: SanDisk SD Extreme A2 (SN64G)