Benchmark #12869 - pibenchmarks.com

Brand: SanDisk Extreme Pro SSD
SSD (2.5" SATA)
#205 / 1,675
78
#586 / 1,675
#566 / 984
#126 / 370
6,556
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-18 06:48:36
#12,869
6,527
-29 (-0.44%)
Anonymous

Storage Details
SanDisk Extreme Pro SSD
SSD (2.5" SATA)
240G
SSD
SanDisk
SDSSDX240GG25
SATA
152d:1561
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
185 MB/s
162.84 MB/s
162.31 MB/s
6,243 IOPS
4,885 IOPS
24,975 KB/s
19,541 KB/s
28,077 KB/s
18,098 KB/s
18,677 KB/s
26,046 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1561:u console=ttyAMA0,115200 console=tty1 root=PARTUUID=ed668143-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 307.4 MiB (7.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 237.99 GiB used: 3.15 GiB (1.3%) ID-1: /dev/mmcblk0 model: SD16G size: 14.42 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk drive model: SDSSDX240GG25 family: Driven SSDs size: 223.57 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0204 drive rev: R201 temp: 128 C scheme: MBR SMART: yes state: enabled health: PASSED on: 315d 14h cycles: 1101 read: 1102 GiB written: 641 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.71 GiB size: 29.12 GiB (98.01%) used: 3.04 GiB (10.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 94b626b3-120c-4c1f-94b8-443f2727c2f8 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6E1A-D477 ID-3: /data raw size: 193.77 GiB size: 189.72 GiB (97.91%) used: 60.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: data uuid: de8d4548-014b-4743-8fe8-3fb99d41a7a7 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.17 GiB fs: ext4 label: rootfs uuid: 087331ff-7f16-4bca-93e2-b07bd0469ef3 ID-2: /dev/sda1 size: 94.0 MiB fs: vfat label: BOOT uuid: 6380-54A9 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.9% command: init pid: 1 mem: 7.99 MiB (0.2%) 2: cpu: 0.9% command: node-red pid: 317 mem: 72.6 MiB (1.8%) 3: cpu: 0.6% command: smartd pid: 1293 mem: 3.17 MiB (0.0%) 4: cpu: 0.2% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: dockerd pid: 464 mem: 58.2 MiB (1.4%) Memory top: 5 1: mem: 72.6 MiB (1.8%) command: node-red pid: 317 cpu: 0.9% 2: mem: 58.2 MiB (1.4%) command: dockerd pid: 464 cpu: 0.2% 3: mem: 30.8 MiB (0.7%) command: containerd pid: 461 cpu: 0.1% 4: mem: 7.99 MiB (0.2%) command: init pid: 1 cpu: 0.9% 5: mem: 7.64 MiB (0.1%) command: systemd-journald pid: 100 cpu: 0.1% Info: Processes: 124 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:1561:u console=ttyAMA0,115200 
           console=tty1 root=PARTUUID=ed668143-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 307.4 MiB (7.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 237.99 GiB used: 3.15 GiB (1.3%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.42 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: SanDisk 
           drive model: SDSSDX240GG25 family: Driven SSDs size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 0204 drive rev: R201 temp: 128 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 315d 14h cycles: 1101 read: 1102 GiB 
           written: 641 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.71 GiB size: 29.12 GiB (98.01%) used: 3.04 GiB (10.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 94b626b3-120c-4c1f-94b8-443f2727c2f8 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6E1A-D477 
           ID-3: /data raw size: 193.77 GiB size: 189.72 GiB (97.91%) used: 60.0 MiB (0.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: data 
           uuid: de8d4548-014b-4743-8fe8-3fb99d41a7a7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.17 GiB fs: ext4 label: rootfs 
           uuid: 087331ff-7f16-4bca-93e2-b07bd0469ef3 
           ID-2: /dev/sda1 size: 94.0 MiB fs: vfat label: BOOT uuid: 6380-54A9 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 152d:1561 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.9% command: init pid: 1 mem: 7.99 MiB (0.2%) 
           2: cpu: 0.9% command: node-red pid: 317 mem: 72.6 MiB (1.8%) 
           3: cpu: 0.6% command: smartd pid: 1293 mem: 3.17 MiB (0.0%) 
           4: cpu: 0.2% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: dockerd pid: 464 mem: 58.2 MiB (1.4%) 
           Memory top: 5 
           1: mem: 72.6 MiB (1.8%) command: node-red pid: 317 cpu: 0.9% 
           2: mem: 58.2 MiB (1.4%) command: dockerd pid: 464 cpu: 0.2% 
           3: mem: 30.8 MiB (0.7%) command: containerd pid: 461 cpu: 0.1% 
           4: mem: 7.99 MiB (0.2%) command: init pid: 1 cpu: 0.9% 
           5: mem: 7.64 MiB (0.1%) command: systemd-journald pid: 100 cpu: 0.1% 
Info:      Processes: 124 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #12869 - Brand: SanDisk Extreme Pro SSD