Benchmark #12872 - pibenchmarks.com

Brand: Panasonic SD
C10 U1
#80 / 1,539
133
#1,226 / 1,539
#206 / 369
1,075
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2020-03-18 07:30:36
#12,872
436
-639 (-146.56%)
Anonymous

Secure Digital (SD) Card Details
Panasonic SD
C10 U1
14.2G
SD
Panasonic
SD16G
SDHC
3.00
0x01
PA
3.0
11/2017
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
6.2 MB/s
21.4 MB/s
19.26 MB/s
21 IOPS
1,859 IOPS
87 KB/s
7,436 KB/s
6,071 KB/s
1,305 KB/s
5,389 KB/s
90 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 243.6 MiB (24.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 139x52 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 247.32 GiB used: 1.90 GiB (0.8%) ID-1: /dev/mmcblk0 model: SD16G size: 14.44 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 840 EVO 250GB family: based SSDs size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: EXT0DB6Q temp: 36 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3y 95d 11h cycles: 2349 written: 9.88 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.18 GiB size: 13.93 GiB (98.23%) used: 1.79 GiB (12.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /home//minecraft raw size: 232.88 GiB size: 228.23 GiB (98.00%) used: 60.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 298e95cb-0751-4ac4-8a97-bbaba5f2508c ID-4: /home/pi/minecraft raw size: 232.88 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 dev: /dev/sda1 label: N/A uuid: 298e95cb-0751-4ac4-8a97-bbaba5f2508c Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5136 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.5% command: pihole-ftl pid: 644 mem: 78.0 MiB (8.4%) 2: cpu: 0.7% command: [usb-storage] pid: 151 mem: 0.00 MiB (0.0%) 3: cpu: 0.6% command: init pid: 1 mem: 7.79 MiB (0.8%) 4: cpu: 0.5% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [kswapd0] pid: 47 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 78.0 MiB (8.4%) command: pihole-ftl pid: 644 cpu: 1.5% 2: mem: 12.4 MiB (1.3%) command: php-cgi pid: 526 cpu: 0.0% 3: mem: 7.79 MiB (0.8%) command: init pid: 1 cpu: 0.6% 4: mem: 7.20 MiB (0.7%) command: systemd pid: 565 cpu: 0.0% 5: mem: 7.04 MiB (0.7%) command: systemd-journald pid: 121 cpu: 0.1% Info: Processes: 130 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 243.6 MiB (24.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 139x52 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 247.32 GiB used: 1.90 GiB (0.8%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.44 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 840 EVO 250GB family: based SSDs 
           size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rev: EXT0DB6Q temp: 36 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 3y 95d 11h cycles: 2349 written: 9.88 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.18 GiB size: 13.93 GiB (98.23%) used: 1.79 GiB (12.8%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /home//minecraft raw size: 232.88 GiB size: 228.23 GiB (98.00%) 
           used: 60.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A 
           uuid: 298e95cb-0751-4ac4-8a97-bbaba5f2508c 
           ID-4: /home/pi/minecraft raw size: 232.88 GiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: ext4 dev: /dev/sda1 label: N/A uuid: 298e95cb-0751-4ac4-8a97-bbaba5f2508c 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:5 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:5136 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.5% command: pihole-ftl pid: 644 mem: 78.0 MiB (8.4%) 
           2: cpu: 0.7% command: [usb-storage] pid: 151 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.6% command: init pid: 1 mem: 7.79 MiB (0.8%) 
           4: cpu: 0.5% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: [kswapd0] pid: 47 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 78.0 MiB (8.4%) command: pihole-ftl pid: 644 cpu: 1.5% 
           2: mem: 12.4 MiB (1.3%) command: php-cgi pid: 526 cpu: 0.0% 
           3: mem: 7.79 MiB (0.8%) command: init pid: 1 cpu: 0.6% 
           4: mem: 7.20 MiB (0.7%) command: systemd pid: 565 cpu: 0.0% 
           5: mem: 7.04 MiB (0.7%) command: systemd-journald pid: 121 cpu: 0.1% 
Info:      Processes: 130 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #12872 - Brand: Panasonic SD