Benchmark #129213 - pibenchmarks.com

Brand: Samsung PM991 M.2 NVMe Series
SSD (M.2 NVMe)
#5 / 1,679
1,232
#153 / 1,679
#153 / 984
#144 / 281
33,696
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2025-12-03 08:31:55
#129,213
31,299
-2,397 (-7.66%)
Anonymous
Samsung ssd on pi 5 using hat

Storage Details
Samsung PM991 M.2 NVMe Series
SSD (M.2 NVMe)
238G
SSD
Samsung
MZ9LQ256HBJD-00BVL
None

System Board Details

Raspberry Pi 5 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
2,400
910

Operating System

Ubuntu 25.04
aarch64

Benchmark Results
345 MB/s
784.01 MB/s
719.02 MB/s
35,555 IOPS
110,702 IOPS
142,222 KB/s
442,810 KB/s
158,451 KB/s
113,695 KB/s
56,481 KB/s
148,022 KB/s

inxi Results
System: Kernel: 6.14.0-1018-raspi arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc cfg80211.ieee80211_regdom=GB Console: pty pts/0 Distro: Ubuntu 25.04 (Plucky Puffin) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.1 details: N/A rev: e04171 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 16 GiB available: 15.59 GiB used: 635.4 MiB (4.0%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 1900 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1900 2: 1900 3: 1900 4: 1900 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: ghostwrite status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 80x40 Monitor-1: HDMI-A-2 model: LG (GoldStar) HDR WFHD built: 2020 res: 2560x1080 dpi: 81 gamma: 1.2 chroma: red: x: 0.651 y: 0.333 green: x: 0.306 y: 0.631 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 798x334mm (31.42x13.15") diag: 869mm (34.2") modes: 2560x1080, 1920x1080, 1680x1050, 1600x900, 1280x1024, 1280x800, 1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480, 640x480 EDID-Warnings: 1: parse_edid: unhandled CEA mode 89 2: parse_edid: unhandled CEA mode 90 3: parse_edid: unhandled CEA mode 93 4: parse_edid: unhandled CEA mode 94 5: parse_edid: unhandled CEA mode 95 6: parse_edid: unhandled CEA mode 96 7: parse_edid: unhandled CEA mode 97 API: N/A Message: No API data available in console. Headless machine? Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.14.0-1018-raspi status: kernel-api tools: N/A Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic scope: global IP v6: virtual: proto kernel_ll scope: link WAN IP: Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 2.76 GiB (1.2%) ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZ9LQ256HBJD-00BVL size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD fw-rev: FXM71V1Q temp: 39.9 C scheme: MBR SMART: yes health: PASSED cycles: 12 read-units: 10,718 [5.48 GB] written-units: 26,030 [13.3 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 237.97 GiB size: 234.2 GiB (98.41%) used: 2.56 GiB (1.1%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: writable uuid: 72b08594-54cf-424a-9626-dfad1c5b7290 ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 202.5 MiB (40.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: system-boot uuid: 353E-40F2 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 2-2:2 info: Maxxter Telink Wireless Receiver type: mouse,keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 50mA chip-ID: 248a:8367 class-ID: 0301 Hub-3: 3-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 4-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-5: 5-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 51.4 C mobo: N/A Fan Speeds (rpm): cpu: 3563 Repos: Packages: 697 pm: dpkg pkgs: 695 libs: 297 tools: apt,apt-get pm: snap pkgs: 2 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources 1: deb http: //ports.ubuntu.com/ubuntu-ports plucky plucky-updates plucky-backports main universe restricted multiverse 2: deb http: //ports.ubuntu.com/ubuntu-ports plucky-security main universe restricted multiverse Processes: CPU top: 5 of 154 1: cpu: 0.7% command: init pid: 1 mem: 15.0 MiB (0.0%) 2: cpu: 0.4% command: [rcu_exp_gp_kthread_worker] pid: 20 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: snapd pid: 876 mem: 36.1 MiB (0.2%) 4: cpu: 0.1% command: systemd pid: 1150 mem: 12.1 MiB (0.0%) 5: cpu: 0.1% command: smartd pid: 2212 mem: 5.27 MiB (0.0%) Memory top: 5 of 154 1: mem: 36.1 MiB (0.2%) command: snapd pid: 876 cpu: 0.1% 2: mem: 27.4 MiB (0.1%) command: unattended-upgrade-shutdown started-by: python3 pid: 980 cpu: 0.0% 3: mem: 18.6 MiB (0.1%) command: packagekitd pid: 1379 cpu: 0.0% 4: mem: 15.0 MiB (0.0%) command: init pid: 1 cpu: 0.7% 5: mem: 13.0 MiB (0.0%) command: modemmanager pid: 978 cpu: 0.0% Info: Processes: 154 Uptime: 9m Init: systemd v: 257 default: graphical tool: systemctl Compilers: N/A Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.14.0-1018-raspi arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    console=ttyAMA0,115200 multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable
    rootfstype=ext4 rootwait fixrtc cfg80211.ieee80211_regdom=GB
  Console: pty pts/0 Distro: Ubuntu 25.04 (Plucky Puffin)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.1 details: N/A rev: e04171 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 16 GiB available: 15.59 GiB used: 635.4 MiB (4.0%) igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB
    desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 1900 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1900 2: 1900 3: 1900 4: 1900 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: server: No display server data found. Headless machine? tty: 80x40
  Monitor-1: HDMI-A-2 model: LG (GoldStar) HDR WFHD built: 2020 res: 2560x1080
    dpi: 81 gamma: 1.2 chroma: red: x: 0.651 y: 0.333 green: x: 0.306 y: 0.631 blue: x: 0.149
    y: 0.059 white: x: 0.314 y: 0.329 size: 798x334mm (31.42x13.15") diag: 869mm (34.2")
    modes: 2560x1080, 1920x1080, 1680x1050, 1600x900, 1280x1024, 1280x800, 1152x864, 1280x720,
    1024x768, 832x624, 800x600, 720x576, 720x480, 640x480
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 89 2: parse_edid: unhandled CEA mode 90
    3: parse_edid: unhandled CEA mode 93 4: parse_edid: unhandled CEA mode 94 5: parse_edid:
    unhandled CEA mode 95 6: parse_edid: unhandled CEA mode 96 7: parse_edid: unhandled CEA mode 97
  API: N/A Message: No API data available in console. Headless machine?
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.14.0-1018-raspi status: kernel-api tools: N/A
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A
    bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: 
  IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global
  IP v6:  virtual: proto kernel_ll scope: link
  WAN IP: 
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 238.47 GiB used: 2.76 GiB (1.2%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZ9LQ256HBJD-00BVL size: 238.47 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD fw-rev: FXM71V1Q temp: 39.9 C scheme: MBR
  SMART: yes health: PASSED cycles: 12 read-units: 10,718 [5.48 GB]
    written-units: 26,030 [13.3 GB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 237.97 GiB size: 234.2 GiB (98.41%) used: 2.56 GiB (1.1%) fs: ext4
    block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: writable
    uuid: 72b08594-54cf-424a-9626-dfad1c5b7290
  ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 202.5 MiB (40.2%)
    fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: system-boot uuid: 353E-40F2
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 2-2:2 info: Maxxter Telink Wireless Receiver type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 50mA chip-ID: 248a:8367 class-ID: 0301
  Hub-3: 3-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 4-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-5: 5-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 51.4 C mobo: N/A
  Fan Speeds (rpm): cpu: 3563
Repos:
  Packages: 697 pm: dpkg pkgs: 695 libs: 297 tools: apt,apt-get pm: snap pkgs: 2
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources
    1: deb http: //ports.ubuntu.com/ubuntu-ports plucky plucky-updates plucky-backports main universe restricted multiverse
    2: deb http: //ports.ubuntu.com/ubuntu-ports plucky-security main universe restricted multiverse
Processes:
  CPU top: 5 of 154
  1: cpu: 0.7% command: init pid: 1 mem: 15.0 MiB (0.0%)
  2: cpu: 0.4% command: [rcu_exp_gp_kthread_worker] pid: 20 mem: 0.00 MiB (0.0%)
  3: cpu: 0.1% command: snapd pid: 876 mem: 36.1 MiB (0.2%)
  4: cpu: 0.1% command: systemd pid: 1150 mem: 12.1 MiB (0.0%)
  5: cpu: 0.1% command: smartd pid: 2212 mem: 5.27 MiB (0.0%)
  Memory top: 5 of 154
  1: mem: 36.1 MiB (0.2%) command: snapd pid: 876 cpu: 0.1%
  2: mem: 27.4 MiB (0.1%) command: unattended-upgrade-shutdown started-by: python3 pid: 980
    cpu: 0.0%
  3: mem: 18.6 MiB (0.1%) command: packagekitd pid: 1379 cpu: 0.0%
  4: mem: 15.0 MiB (0.0%) command: init pid: 1 cpu: 0.7%
  5: mem: 13.0 MiB (0.0%) command: modemmanager pid: 978 cpu: 0.0%
Info:
  Processes: 154 Uptime: 9m Init: systemd v: 257 default: graphical tool: systemctl Compilers: N/A
  Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

Benchmark #129213 - Brand: Samsung PM991 M.2 NVMe Series