Benchmark #13000 - pibenchmarks.com

Brand: Seagate Backup+
HDD (Portable)
#332 / 1,672
34
#711 / 1,672
#6 / 68
#0 / 24
5,881
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-19 16:07:57
#13,000
7,753
+1,872 (+24.15%)
Anonymous

Storage Details
Seagate Backup+
HDD (Portable)
465.5G
HDD
Seagate
BACKUP+
0bc2:ab24
0x0bc2
0xab24
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
189 MB/s
238.12 MB/s
217.31 MB/s
11,983 IOPS
21,903 IOPS
47,934 KB/s
87,614 KB/s
31,979 KB/s
21,804 KB/s
20,518 KB/s
23,850 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=13372020-02 rootfstype=ext4 rootdelay=5 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 224.1 MiB (11.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 197x59 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 525.24 GiB used: 4.70 GiB (0.9%) ID-1: /dev/mmcblk0 vendor: Smart Modular Tech. model: SH64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: BACKUP+ size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 0302 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 458.27 GiB (98.44%) used: 4.65 GiB (1.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: ssd_rootfs uuid: f1d0820b-e760-4cbc-9ab1-ad676eb638aa ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 0000-1337 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.4% command: smbd pid: 937 mem: 13.3 MiB (0.6%) 2: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 3395 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: packagekitd pid: 3403 mem: 12.3 MiB (0.6%) 4: cpu: 0.1% command: init pid: 1 mem: 8.16 MiB (0.4%) 5: cpu: 0.1% command: mysqld pid: 541 mem: 57.9 MiB (2.9%) Memory top: 5 1: mem: 57.9 MiB (2.9%) command: mysqld pid: 541 cpu: 0.1% 2: mem: 22.2 MiB (1.1%) command: smokeping pid: 707 cpu: 0.0% 3: mem: 21.6 MiB (1.0%) command: php-fpm: pid: 405 cpu: 0.0% 4: mem: 16.0 MiB (0.8%) command: smbd pid: 922 cpu: 0.0% 5: mem: 13.3 MiB (0.6%) command: smbd pid: 937 cpu: 0.4% Info: Processes: 149 Uptime: 1h 03m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=13372020-02 
           rootfstype=ext4 rootdelay=5 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.96 GiB used: 224.1 MiB (11.2%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 197x59 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 525.24 GiB used: 4.70 GiB (0.9%) 
           ID-1: /dev/mmcblk0 vendor: Smart Modular Tech. model: SH64G size: 59.48 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: BACKUP+ size: 465.76 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0302 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 458.27 GiB (98.44%) used: 4.65 GiB (1.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: ssd_rootfs 
           uuid: f1d0820b-e760-4cbc-9ab1-ad676eb638aa 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 0000-1337 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Seagate RSS LLC Backup Plus Portable Drive type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab24 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.4% command: smbd pid: 937 mem: 13.3 MiB (0.6%) 
           2: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 3395 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.2% command: packagekitd pid: 3403 mem: 12.3 MiB (0.6%) 
           4: cpu: 0.1% command: init pid: 1 mem: 8.16 MiB (0.4%) 
           5: cpu: 0.1% command: mysqld pid: 541 mem: 57.9 MiB (2.9%) 
           Memory top: 5 
           1: mem: 57.9 MiB (2.9%) command: mysqld pid: 541 cpu: 0.1% 
           2: mem: 22.2 MiB (1.1%) command: smokeping pid: 707 cpu: 0.0% 
           3: mem: 21.6 MiB (1.0%) command: php-fpm: pid: 405 cpu: 0.0% 
           4: mem: 16.0 MiB (0.8%) command: smbd pid: 922 cpu: 0.0% 
           5: mem: 13.3 MiB (0.6%) command: smbd pid: 937 cpu: 0.4% 
Info:      Processes: 149 Uptime: 1h 03m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.38

Benchmark #13000 - Brand: Seagate Backup+