Benchmark #130141 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,679
2,932
#648 / 1,679
#625 / 984
#160 / 370
6,237
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-01-04 06:37:04
#130,141
7,274
+1,037 (+14.26%)
SOD
Kingston A400 SSD on Pi 4 using StarTech SATA to USB adapter

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
120G
SSD
Kingston
SA400S37120G
SATA
3.20
5,000
14b0:0207
0x14b0
0x0207 (CD-Writer Plus 8200e)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
61.7 MB/s
121.6 MB/s
105.61 MB/s
17,210 IOPS
21,810 IOPS
68,840 KB/s
87,241 KB/s
20,525 KB/s
24,609 KB/s
20,491 KB/s
27,855 KB/s

inxi Results
System: Host: rpi4 Kernel: 6.1.0-41-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xb03112 bcm2709.serial=0xf135aac bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/1 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 2 GiB available: 1.8 GiB used: 1.08 GiB (60.3%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 197x59 API: EGL v: 1.5 hw: drv: broadcom v3d platforms: device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d inactive: wayland,x11 API: OpenGL Message: GL data unavailable in console for root. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.1.0-41-arm64 status: kernel-api tools: N/A Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.0.X.X/24 type: dynamic scope: global broadcast: 10.0.X.X IP v6: fe80::dea6:32ff:feb3:2450/64 scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br-56c10f4c4686 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::4ce6:32ff:fe28:25cd/64 scope: link IF-ID-2: br-e2502fe9e185 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X IP v6: fe80::74d7:8dff:feff:adca/64 scope: link IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v6: fe80::c460:4bff:fefe:e8d2/64 scope: link IF-ID-4: veth03a88c8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth1166912 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth60aae2d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: veth678cc33 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: vetha5474b8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 149.143.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 3.75 TiB used: 2.86 TiB (76.4%) ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD40EFRX-68N32N0 family: Red size: 3.64 TiB block-size: physical: 4096 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: HDD rpm: 5400 WD-WCC7K1NVD8NY fw-rev: 82.00A82 temp: 43 C SMART: yes state: enabled health: PASSED on: 5y 7d 13h cycles: 31 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.29 GiB size: 109.55 GiB (98.44%) used: 11.77 GiB (10.7%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 29a3769a-4944-4a04-bfc2-8865967a5d7e ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 143 MiB (28.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 67D7-2282 ID-3: /mnt/usbhdd raw-size: 3.64 TiB size: 3.58 TiB (98.40%) used: 2.85 TiB (79.7%) fs: ext4 block-size: 4096 B dev: /dev/sdb maj-min: 8:16 label: N/A uuid: 9fac2c3f-a2f1-4ca4-ad48-c8c720447992 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 2 GiB used: 725.8 MiB (35.4%) priority: -2 file: /swapfile Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411 class-ID: 0900 Hub-4: 1-1.2.1:5 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411 class-ID: 0900 Device-1: 1-1.2.3:6 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio,gpio_stub_drv interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 90mA chip-ID: 0403:6001 class-ID: 0000 Device-2: 1-1.4:4 info: Silicon Labs CP210x UART Bridge type: driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 10c4:ea60 class-ID: 0000 00_12_4B_00_23_93_3B_23 Hub-5: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: StarTech.com SA400S37120G type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 14b0:0207 class-ID: 0806 Hub-6: 2-2:3 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411 class-ID: 0900 Hub-7: 2-2.1:4 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411 class-ID: 0900 Device-1: 2-2.1.2:5 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 174c:55aa class-ID: 0806 Sensors: System Temperatures: cpu: 53.1 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 651 libs: 353 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware 3: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bookworm stable Processes: CPU top: 5 of 222 1: cpu: 500% command: ps pid: 119765 mem: 3.92 MiB (0.2%) 2: cpu: 3.1% command: python3 pid: 1724 mem: 480.2 MiB (26.0%) 3: cpu: 1.7% command: vsftpd pid: 119757 mem: 1.39 MiB (0.0%) 4: cpu: 0.5% command: bash pid: 119381 mem: 2.64 MiB (0.1%) 5: cpu: 0.3% command: containerd pid: 572 mem: 39.1 MiB (2.1%) Memory top: 5 of 222 1: mem: 480.2 MiB (26.0%) command: python3 pid: 1724 cpu: 3.1% 2: mem: 65.4 MiB (3.5%) command: python3 pid: 2281 cpu: 0.2% 3: mem: 55.1 MiB (2.9%) command: node pid: 11562 cpu: 0.0% 4: mem: 53.2 MiB (2.8%) command: dockerd pid: 595 cpu: 0.3% 5: mem: 39.1 MiB (2.1%) command: containerd pid: 572 cpu: 0.3% Info: Processes: 222 Uptime: 2d 1h 0m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: N/A Shell: Storage.sh (sudo) default: Bash v: 5.2.15 running-in: pty pts/1 (SSH) inxi: 3.3.31

inxi Results

System:
  Host: rpi4 Kernel: 6.1.0-41-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xb03112
    bcm2709.serial=0xf135aac bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42
    bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
    vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw
    fsck.repair=yes net.ifnames=0 rootwait
  Console: pty pts/1 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 2 GiB available: 1.8 GiB used: 1.08 GiB (60.3%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil
    cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu
  Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 197x59
  API: EGL v: 1.5 hw: drv: broadcom v3d platforms: device: 0 egl: 1.4 drv: v3d device: 1
    drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d inactive: wayland,x11
  API: OpenGL Message: GL data unavailable in console for root.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.1.0-41-arm64 status: kernel-api tools: N/A
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.0.X.X/24 type: dynamic scope: global broadcast: 10.0.X.X
  IP v6: fe80::dea6:32ff:feb3:2450/64 scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: br-56c10f4c4686 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
  IP v6: fe80::4ce6:32ff:fe28:25cd/64 scope: link
  IF-ID-2: br-e2502fe9e185 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.19.X.X/16 scope: global broadcast: 172.19.X.X
  IP v6: fe80::74d7:8dff:feff:adca/64 scope: link
  IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
  IP v6: fe80::c460:4bff:fefe:e8d2/64 scope: link
  IF-ID-4: veth03a88c8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: veth1166912 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: veth60aae2d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-7: veth678cc33 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-8: vetha5474b8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-9: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  WAN IP: 149.143.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 3.75 TiB used: 2.86 TiB (76.4%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
    physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    tech: SSD scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD40EFRX-68N32N0 family: Red
    size: 3.64 TiB block-size: physical: 4096 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s
    lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: HDD rpm: 5400
    WD-WCC7K1NVD8NY fw-rev: 82.00A82 temp: 43 C
  SMART: yes state: enabled health: PASSED on: 5y 7d 13h cycles: 31
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 111.29 GiB size: 109.55 GiB (98.44%) used: 11.77 GiB (10.7%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: 29a3769a-4944-4a04-bfc2-8865967a5d7e
  ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 143 MiB (28.2%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 67D7-2282
  ID-3: /mnt/usbhdd raw-size: 3.64 TiB size: 3.58 TiB (98.40%) used: 2.85 TiB (79.7%) fs: ext4
    block-size: 4096 B dev: /dev/sdb maj-min: 8:16 label: N/A
    uuid: 9fac2c3f-a2f1-4ca4-ad48-c8c720447992
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 2 GiB used: 725.8 MiB (35.4%) priority: -2 file: /swapfile
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 1-1.2:3 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 0bda:5411 class-ID: 0900
  Hub-4: 1-1.2.1:5 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 0bda:5411 class-ID: 0900
  Device-1: 1-1.2.3:6 info: Future Devices FT232 Serial (UART) IC type: 
    driver: ftdi_sio,gpio_stub_drv interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 90mA chip-ID: 0403:6001 class-ID: 0000   Device-2: 1-1.4:4 info: Silicon Labs CP210x UART Bridge type:  driver: cp210x
    interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 10c4:ea60 class-ID: 0000 00_12_4B_00_23_93_3B_23
  Hub-5: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: StarTech.com SA400S37120G type: mass storage driver: uas interfaces: 1
    rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 14b0:0207
    class-ID: 0806   Hub-6: 2-2:3 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 0bda:0411 class-ID: 0900
  Hub-7: 2-2.1:4 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 0bda:0411 class-ID: 0900
  Device-1: 2-2.1.2:5 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E
    bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s)
    lanes: 1 mode: 3.2 gen-1x1 chip-ID: 174c:55aa class-ID: 0806 Sensors:
  System Temperatures: cpu: 53.1 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 651 libs: 353 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
    3: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bookworm stable
Processes:
  CPU top: 5 of 222
  1: cpu: 500% command: ps pid: 119765 mem: 3.92 MiB (0.2%)
  2: cpu: 3.1% command: python3 pid: 1724 mem: 480.2 MiB (26.0%)
  3: cpu: 1.7% command: vsftpd pid: 119757 mem: 1.39 MiB (0.0%)
  4: cpu: 0.5% command: bash pid: 119381 mem: 2.64 MiB (0.1%)
  5: cpu: 0.3% command: containerd pid: 572 mem: 39.1 MiB (2.1%)
  Memory top: 5 of 222
  1: mem: 480.2 MiB (26.0%) command: python3 pid: 1724 cpu: 3.1%
  2: mem: 65.4 MiB (3.5%) command: python3 pid: 2281 cpu: 0.2%
  3: mem: 55.1 MiB (2.9%) command: node pid: 11562 cpu: 0.0%
  4: mem: 53.2 MiB (2.8%) command: dockerd pid: 595 cpu: 0.3%
  5: mem: 39.1 MiB (2.1%) command: containerd pid: 572 cpu: 0.3%
Info:
  Processes: 222 Uptime: 2d 1h 0m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: N/A Shell: Storage.sh (sudo) default: Bash v: 5.2.15
  running-in: pty pts/1 (SSH) inxi: 3.3.31

Benchmark #130141 - Brand: Kingston A400S Series