Benchmark #13029 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SB32G)
A1 C10
#110 / 1,539
102
#1,232 / 1,539
#210 / 369
1,060
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-20 04:31:38
#13,029
1,163
+103 (+8.86%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SB32G)
A1 C10
29.5G
SD
SanDisk
SB32G
SDHC
5.00
0x03
SD
8.0
08/2019
Class 10
A1
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
19.7 MB/s
40.62 MB/s
36.17 MB/s
779 IOPS
3,123 IOPS
3,119 KB/s
12,493 KB/s
10,221 KB/s
3,740 KB/s
9,231 KB/s
2,573 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 314.6 MiB (15.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 157x60 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 495.48 GiB used: 2.03 GiB (0.4%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Crucial model: CT500MX500SSD1 family: /Micron MX500 SSDs size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: M3CR023 temp: 36 C SMART: yes state: enabled health: PASSED on: 6 hrs cycles: 17 written: 8.85 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 1.91 GiB (6.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /srv/dev-disk-by-label-OMV5 raw size: 465.75 GiB size: 457.44 GiB (98.22%) used: 72.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/dm-0 label: OMV5 uuid: 093a33f6-73e2-4eda-a0e1-fd4f81558c10 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/omvextras.list 1: deb https: //dl.bintray.com/openmediavault-plugin-developers/usul buster main 2: deb [arch=armhf] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/openmediavault-kernel-backports.list 1: deb http: //httpredir.debian.org/debian buster-backports main contrib non-free Active apt repos in: /etc/apt/sources.list.d/openmediavault-local.list 1: deb [trusted=yes] file: /var/cache/openmediavault/archives / Active apt repos in: /etc/apt/sources.list.d/openmediavault-os-security.list 1: deb http: //security.debian.org/debian-security buster/updates main contrib non-free 2: deb-src http: //security.debian.org/debian-security buster/updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/openmediavault.list 1: deb http: //packages.openmediavault.org/public/ usul main 2: deb https: //openmediavault.github.io/packages/ usul main 3: deb http: //packages.openmediavault.org/public/ usul partner Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 9.2% command: salt-minion started by: python3 pid: 14966 mem: 33.6 MiB (1.7%) 2: cpu: 3.5% command: php-fpm: pid: 13923 mem: 13.5 MiB (0.6%) 3: cpu: 3.1% command: php-fpm: pid: 13936 mem: 13.3 MiB (0.6%) 4: cpu: 0.4% command: init pid: 1 mem: 8.32 MiB (0.4%) 5: cpu: 0.4% command: salt-minion started by: python3 pid: 14959 mem: 20.7 MiB (1.0%) Memory top: 5 1: mem: 33.6 MiB (1.7%) command: salt-minion started by: python3 pid: 14966 cpu: 9.2% 2: mem: 25.7 MiB (1.3%) command: rpc.mountd pid: 707 cpu: 0.0% 3: mem: 20.7 MiB (1.0%) command: salt-minion started by: python3 pid: 14959 cpu: 0.4% 4: mem: 17.6 MiB (0.9%) command: salt-minion started by: python3 pid: 14976 cpu: 0.0% 5: mem: 16.7 MiB (0.8%) command: php-fpm: pid: 673 cpu: 0.0% Info: Processes: 172 Uptime: 1h 14m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 314.6 MiB (15.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 157x60 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 495.48 GiB used: 2.03 GiB (0.4%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Crucial model: CT500MX500SSD1 
           family: /Micron MX500 SSDs size: 465.76 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.3 speed: 6.0 Gb/s rev: M3CR023 temp: 36 C 
           SMART: yes state: enabled health: PASSED on: 6 hrs cycles: 17 written: 8.85 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 1.91 GiB (6.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /srv/dev-disk-by-label-OMV5 raw size: 465.75 GiB size: 457.44 GiB (98.22%) 
           used: 72.0 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/dm-0 label: OMV5 
           uuid: 093a33f6-73e2-4eda-a0e1-fd4f81558c10 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/omvextras.list 
           1: deb https: //dl.bintray.com/openmediavault-plugin-developers/usul buster main
           2: deb [arch=armhf] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/openmediavault-kernel-backports.list 
           1: deb http: //httpredir.debian.org/debian buster-backports main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/openmediavault-local.list 
           1: deb [trusted=yes] file: /var/cache/openmediavault/archives /
           Active apt repos in: /etc/apt/sources.list.d/openmediavault-os-security.list 
           1: deb http: //security.debian.org/debian-security buster/updates main contrib non-free
           2: deb-src http: //security.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/openmediavault.list 
           1: deb http: //packages.openmediavault.org/public/ usul main
           2: deb https: //openmediavault.github.io/packages/ usul main
           3: deb http: //packages.openmediavault.org/public/ usul partner
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 9.2% command: salt-minion started by: python3 pid: 14966 mem: 33.6 MiB (1.7%) 
           2: cpu: 3.5% command: php-fpm: pid: 13923 mem: 13.5 MiB (0.6%) 
           3: cpu: 3.1% command: php-fpm: pid: 13936 mem: 13.3 MiB (0.6%) 
           4: cpu: 0.4% command: init pid: 1 mem: 8.32 MiB (0.4%) 
           5: cpu: 0.4% command: salt-minion started by: python3 pid: 14959 mem: 20.7 MiB (1.0%) 
           Memory top: 5 
           1: mem: 33.6 MiB (1.7%) command: salt-minion started by: python3 pid: 14966 cpu: 9.2% 
           2: mem: 25.7 MiB (1.3%) command: rpc.mountd pid: 707 cpu: 0.0% 
           3: mem: 20.7 MiB (1.0%) command: salt-minion started by: python3 pid: 14959 cpu: 0.4% 
           4: mem: 17.6 MiB (0.9%) command: salt-minion started by: python3 pid: 14976 cpu: 0.0% 
           5: mem: 16.7 MiB (0.8%) command: php-fpm: pid: 673 cpu: 0.0% 
Info:      Processes: 172 Uptime: 1h 14m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13029 - Brand: SanDisk SD Ultra A1 (SB32G)