Benchmark #13065 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#60 / 1,700
319
#1,005 / 1,700
#919 / 989
#130 / 145
3,228
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-20 10:59:37
#13,065
3,648
+420 (+11.51%)
Anonymous

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
128G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
0781:5588
0x0781 (SanDisk Corp.)
0x5588
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
111 MB/s
245.81 MB/s
201.22 MB/s
3,080 IOPS
3,054 IOPS
12,320 KB/s
12,217 KB/s
23,089 KB/s
20,173 KB/s
11,054 KB/s
12,073 KB/s

inxi Results
System: Kernel: 4.19.105-v8-28 aarch64 bits: 64 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/sda6 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: LightDM 1.26.0 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.79 GiB used: 755.9 MiB (19.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.6 driver: fbdev unloaded: modesetting tty: 112x29 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.105-v8-28 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 120.19 GiB used: 7.11 GiB (5.9%) ID-1: /dev/mmcblk0 vendor: Apacer model: APPSD size: 961.0 MiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD family: based SSDs size: 119.25 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 6EB 1030 temp: 8 C scheme: MBR SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.96 GiB (98.25%) used: 7.07 GiB (24.4%) fs: ext4 block size: 4096 B dev: /dev/sda6 label: writableF uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.7 MiB (16.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: system-boot uuid: 69C0-9BD0 Unmounted: ID-1: /dev/sda1 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda5 size: 256.0 MiB fs: vfat label: system-boot uuid: CFAC-AEF0 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Chicony type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0939 Device-2: 1-1.4:4 info: SiGma Micro type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1c4f:0016 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse 11: deb http: //ports.ubuntu.com/ubuntu-ports bionic-proposed restricted main multiverse universe Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main No active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list No active apt repos in: /etc/apt/sources.list.d/ubuntu-x-swat-ubuntu-updates-bionic.list Processes: CPU top: 5 1: cpu: 0.7% command: init pid: 1 mem: 8.16 MiB (0.2%) 2: cpu: 0.7% command: sshd: pid: 1639 mem: 6.52 MiB (0.1%) 3: cpu: 0.4% command: sshd: pid: 2446 mem: 6.34 MiB (0.1%) 4: cpu: 0.3% command: smartd pid: 3309 mem: 3.97 MiB (0.1%) 5: cpu: 0.2% command: dbus-daemon pid: 576 mem: 5.11 MiB (0.1%) Memory top: 5 1: mem: 64.3 MiB (1.6%) command: evolution-calendar-factory pid: 1499 cpu: 0.1% 2: mem: 59.6 MiB (1.5%) command: evolution-calendar-factory-subprocess pid: 1590 cpu: 0.0% 3: mem: 50.8 MiB (1.3%) command: blueman-applet started by: python3 pid: 1921 cpu: 0.1% 4: mem: 49.1 MiB (1.2%) command: xorg pid: 756 cpu: 0.1% 5: mem: 48.0 MiB (1.2%) command: blueman-applet started by: python3 pid: 1153 cpu: 0.1% Info: Processes: 237 Uptime: 14m Init: systemd v: 237 runlevel: 5 target: graphical.target Compilers: gcc: 7.5.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.105-v8-28 aarch64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/sda6 
           rootfstype=ext4 elevator=deadline rootwait 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.79 GiB used: 755.9 MiB (19.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.6 driver: fbdev unloaded: modesetting tty: 112x29 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.105-v8-28 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 120.19 GiB used: 7.11 GiB (5.9%) 
           ID-1: /dev/mmcblk0 vendor: Apacer model: APPSD size: 961.0 MiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD 
           family: based SSDs size: 119.25 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rev: 6EB 1030 
           temp: 8 C scheme: MBR 
           SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: 
           attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.96 GiB (98.25%) used: 7.07 GiB (24.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda6 label: writableF 
           uuid: b96d647f-679e-4582-87d0-2d8c7afc91f4 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 40.7 MiB (16.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
           label: system-boot uuid: 69C0-9BD0 
Unmounted: ID-1: /dev/sda1 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda5 size: 256.0 MiB fs: vfat label: system-boot uuid: CFAC-AEF0 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Chicony type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0939 
           Device-2: 1-1.4:4 info: SiGma Micro type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1c4f:0016 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           11: deb http: //ports.ubuntu.com/ubuntu-ports bionic-proposed restricted main multiverse universe
           Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 
           1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main
           No active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           No active apt repos in: /etc/apt/sources.list.d/ubuntu-x-swat-ubuntu-updates-bionic.list 
Processes: CPU top: 5 
           1: cpu: 0.7% command: init pid: 1 mem: 8.16 MiB (0.2%) 
           2: cpu: 0.7% command: sshd: pid: 1639 mem: 6.52 MiB (0.1%) 
           3: cpu: 0.4% command: sshd: pid: 2446 mem: 6.34 MiB (0.1%) 
           4: cpu: 0.3% command: smartd pid: 3309 mem: 3.97 MiB (0.1%) 
           5: cpu: 0.2% command: dbus-daemon pid: 576 mem: 5.11 MiB (0.1%) 
           Memory top: 5 
           1: mem: 64.3 MiB (1.6%) command: evolution-calendar-factory pid: 1499 cpu: 0.1% 
           2: mem: 59.6 MiB (1.5%) command: evolution-calendar-factory-subprocess pid: 1590 
           cpu: 0.0% 
           3: mem: 50.8 MiB (1.3%) command: blueman-applet started by: python3 pid: 1921 cpu: 0.1% 
           4: mem: 49.1 MiB (1.2%) command: xorg pid: 756 cpu: 0.1% 
           5: mem: 48.0 MiB (1.2%) command: blueman-applet started by: python3 pid: 1153 cpu: 0.1% 
Info:      Processes: 237 Uptime: 14m Init: systemd v: 237 runlevel: 5 target: graphical.target 
           Compilers: gcc: 7.5.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.38

Benchmark #13065 - Brand: SanDisk Extreme Pro USB