Benchmark #13079 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#23 / 1,700
609
#574 / 1,700
#552 / 989
#111 / 370
6,715
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-20 13:09:24
#13,079
5,825
-890 (-15.28%)
Anonymous
Samsung 850 Evo on Pi 4

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
250G
SSD
Samsung
SSD850EVO250GB
2.5 inch
SATA
3.00
5,000
1d6b:1066
0x1d6b (Linux Foundation)
0x1066 (PocketMouse Max Glow)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
157 MB/s
139.33 MB/s
139.15 MB/s
6,380 IOPS
4,528 IOPS
25,520 KB/s
18,115 KB/s
27,400 KB/s
24,895 KB/s
17,434 KB/s
21,784 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = "en_US.UTF-8", LC_MONETARY = "en_US.UTF-8", LC_TERMINAL = "iTerm2", LC_MESSAGES = "en_US.UTF-8", LC_CTYPE = "en_US.UTF-8", LC_TIME = "en_US.UTF-8", LC_COLLATE = "en_US.UTF-8", LC_NUMERIC = "en_US.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c4f3b4b3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 219.7 MiB (5.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 196x135 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 240.31 GiB used: 1.34 GiB (0.6%) ID-1: /dev/mmcblk0 model: SD8GB size: 7.42 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: NORELSYS 106X drive model: SSD 850 EVO 250GB family: based SSDs size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 2B6Q temp: 36 C scheme: MBR SMART: yes state: enabled health: PASSED on: 316d 1h cycles: 163 written: 2.72 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.63 GiB size: 229.02 GiB (98.45%) used: 1.29 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Unmounted: ID-1: /dev/mmcblk0p2 size: 7.17 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: GreenAsia type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:00a8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2537:1066 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.1% command: systemd pid: 1 mem: 8.24 MiB (0.2%) 2: cpu: 1.4% command: [usb-storage] pid: 80 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: dbus-daemon pid: 337 mem: 3.41 MiB (0.0%) 4: cpu: 0.4% command: smartd pid: 2993 mem: 3.13 MiB (0.0%) 5: cpu: 0.2% command: systemd-logind pid: 380 mem: 5.74 MiB (0.1%) Memory top: 5 1: mem: 8.24 MiB (0.2%) command: systemd pid: 1 cpu: 4.1% 2: mem: 6.67 MiB (0.1%) command: systemd-journald pid: 1471 cpu: 0.1% 3: mem: 6.53 MiB (0.1%) command: systemd pid: 619 cpu: 0.0% 4: mem: 6.12 MiB (0.1%) command: sshd: pid: 609 cpu: 0.1% 5: mem: 5.74 MiB (0.1%) command: systemd-logind pid: 380 cpu: 0.2% Info: Processes: 146 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = "en_US.UTF-8",
	LC_MONETARY = "en_US.UTF-8",
	LC_TERMINAL = "iTerm2",
	LC_MESSAGES = "en_US.UTF-8",
	LC_CTYPE = "en_US.UTF-8",
	LC_TIME = "en_US.UTF-8",
	LC_COLLATE = "en_US.UTF-8",
	LC_NUMERIC = "en_US.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c4f3b4b3-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 219.7 MiB (5.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 196x135 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 240.31 GiB used: 1.34 GiB (0.6%) 
           ID-1: /dev/mmcblk0 model: SD8GB size: 7.42 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: NORELSYS 106X drive model: SSD 850 EVO 250GB 
           family: based SSDs size: 232.89 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rev: 2B6Q temp: 36 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 316d 1h cycles: 163 written: 2.72 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.63 GiB size: 229.02 GiB (98.45%) used: 1.29 GiB (0.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.17 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: GreenAsia type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 0e8f:00a8 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 2537:1066 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.1% command: systemd pid: 1 mem: 8.24 MiB (0.2%) 
           2: cpu: 1.4% command: [usb-storage] pid: 80 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: dbus-daemon pid: 337 mem: 3.41 MiB (0.0%) 
           4: cpu: 0.4% command: smartd pid: 2993 mem: 3.13 MiB (0.0%) 
           5: cpu: 0.2% command: systemd-logind pid: 380 mem: 5.74 MiB (0.1%) 
           Memory top: 5 
           1: mem: 8.24 MiB (0.2%) command: systemd pid: 1 cpu: 4.1% 
           2: mem: 6.67 MiB (0.1%) command: systemd-journald pid: 1471 cpu: 0.1% 
           3: mem: 6.53 MiB (0.1%) command: systemd pid: 619 cpu: 0.0% 
           4: mem: 6.12 MiB (0.1%) command: sshd: pid: 609 cpu: 0.1% 
           5: mem: 5.74 MiB (0.1%) command: systemd-logind pid: 380 cpu: 0.2% 
Info:      Processes: 146 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13079 - Brand: Samsung 850 EVO