Benchmark #130864 - pibenchmarks.com

Brand: Lexar NM710
SSD (M.2 NVMe)
#245 / 1,680
67
#39 / 1,680
#39 / 984
#38 / 281
48,409
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-01-24 11:31:46
#130,864
51,503
+3,094 (+6.01%)
Anonymous

Storage Details
Lexar NM710
SSD (M.2 NVMe)
931G
SSD
Lexar
SSDNM7101TB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
632 MB/s
794.05 MB/s
806.7 MB/s
72,112 IOPS
206,868 IOPS
288,450 KB/s
827,474 KB/s
234,761 KB/s
199,660 KB/s
67,953 KB/s
224,831 KB/s

inxi Results
System: Host: pi51 Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=6ac316b2-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.87 GiB used: 1.77 GiB (22.4%) igpu: 4 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 1500 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: LabWC driver: N/A tty: 80x25 API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu name: V3D 7.1.X.X driver: mesa v3dv v: 24.2.8-1~bpo12+rpt4 device-ID: 14e4:55701c33 surfaces: N/A device: 1 type: cpu name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 24.2.8-1~bpo12+rpt4 (LLVM 15.0.6) device-ID: 10005:0000 surfaces: N/A API: OpenGL Message: GL data unavailable in console, glxinfo missing. Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.2.7 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::1ca6:157:a46d:5bdc/64 type: noprefixroute scope: link IF-ID-1: br-1a37e73ec5af state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.21.X.X/16 scope: global broadcast: 172.21.X.X IF-ID-2: br-5bc0cb5086a1 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.28.X.X/16 scope: global broadcast: 172.28.X.X IP v6: fe80::42:43ff:fea3:2845/64 scope: link IF-ID-3: br-8b54aa1dd4de state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.25.X.X/16 scope: global broadcast: 172.25.X.X IP v6: fe80::42:bfff:fe0e:8d23/64 scope: link IF-ID-4: br-934f4bc89dff state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.26.X.X/16 scope: global broadcast: 172.26.X.X IP v6: fe80::42:b7ff:fef0:7542/64 scope: link IF-ID-5: br-9be3c9b00df4 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.24.X.X/16 scope: global broadcast: 172.24.X.X IP v6: fe80::42:33ff:fe89:4077/64 scope: link IF-ID-6: br-ae0b6b9708b0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.31.X.X/16 scope: global broadcast: 172.31.X.X IF-ID-7: br-ce705a1259be state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::42:13ff:fe50:f52e/64 scope: link IF-ID-8: br-cf8b600df3a6 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.22.X.X/16 scope: global broadcast: 172.22.X.X IP v6: fe80::42:abff:fe03:4724/64 scope: link IF-ID-9: br-daca423ae89e state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.20.X.X/16 scope: global broadcast: 172.20.X.X IF-ID-10: br-e3ea921712ee state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.30.X.X/16 scope: global broadcast: 172.30.X.X IF-ID-11: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-12: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::b920:877e:2d:de29/64 type: noprefixroute scope: link IF-ID-13: veth08b915e state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-14: veth0f2a2be state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-15: veth1dea4f8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-16: veth382fd66 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-17: veth47d6eb8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-18: veth64dbc65 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-19: vetha7be685 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-20: vethbc94739 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-21: vethe48b20d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-22: vethf693b0d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 109.250.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 931.51 GiB used: 29.88 GiB (3.2%) ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Lexar model: SSD NM710 1TB size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD fw-rev: SN11778 temp: 43.9 C scheme: MBR SMART: yes health: PASSED on: 1y 47d 5h cycles: 78 read-units: 266,632 [136 GB] written-units: 3,316,675 [1.69 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 931.01 GiB size: 916.46 GiB (98.44%) used: 29.82 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: a36be96c-66be-4487-a7a6-0481bca99d89 ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 68.6 MiB (13.4%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: bootfs uuid: 5DC7-F115 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 512 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 51.4 C mobo: N/A Fan Speeds (rpm): cpu: 3026 Repos: Packages: pm: dpkg pkgs: 1948 libs: 1038 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Processes: CPU top: 5 of 329 1: cpu: 6.6% command: node pid: 2494 mem: 146.5 MiB (1.8%) 2: cpu: 5.0% command: gunicorn started-by: python pid: 4317 mem: 239.0 MiB (2.9%) 3: cpu: 4.9% command: gunicorn started-by: python pid: 4315 mem: 238.9 MiB (2.9%) 4: cpu: 4.9% command: gunicorn started-by: python pid: 4316 mem: 238.8 MiB (2.9%) 5: cpu: 3.7% command: packagekitd pid: 2257 mem: 40.2 MiB (0.4%) Memory top: 5 of 329 1: mem: 239.0 MiB (2.9%) command: gunicorn started-by: python pid: 4317 cpu: 5.0% 2: mem: 238.9 MiB (2.9%) command: gunicorn started-by: python pid: 4315 cpu: 4.9% 3: mem: 238.8 MiB (2.9%) command: gunicorn started-by: python pid: 4316 cpu: 4.9% 4: mem: 146.5 MiB (1.8%) command: node pid: 2494 cpu: 6.6% 5: mem: 119.1 MiB (1.4%) command: mariadbd pid: 2156 cpu: 2.1% Info: Processes: 329 Uptime: 1m Init: systemd v: 252 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: bonnie (sudo) default: Bash v: 5.2.15 running-in: pty pts/1 inxi: 3.3.31

inxi Results

System:
  Host: pi51 Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A
    clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M
    8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8
    system_heap.max_order=0 iommu_dma_numa_policy=interleave
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000
    vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1
    root=PARTUUID=6ac316b2-02 rootfstype=ext4 fsck.repair=yes rootwait quiet
    splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE
  Console: pty pts/1 DM: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.87 GiB used: 1.77 GiB (22.4%)
    igpu: 4 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 512 KiB
    desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB
    desc: 1x2 MiB
  Speed (MHz): avg: 1500 min/max: 1500/2400 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9
    compositor: LabWC driver: N/A tty: 80x25
  API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu
    name: V3D 7.1.X.X driver: mesa v3dv v: 24.2.8-1~bpo12+rpt4
    device-ID: 14e4:55701c33 surfaces: N/A device: 1 type: cpu name: llvmpipe
    (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 24.2.8-1~bpo12+rpt4 (LLVM
    15.0.6) device-ID: 10005:0000 surfaces: N/A
  API: OpenGL Message: GL data unavailable in console, glxinfo missing.
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.2.7 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel
    port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::1ca6:157:a46d:5bdc/64 type: noprefixroute scope: link
  IF-ID-1: br-1a37e73ec5af state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.21.X.X/16 scope: global broadcast: 172.21.X.X
  IF-ID-2: br-5bc0cb5086a1 state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.28.X.X/16 scope: global broadcast: 172.28.X.X
  IP v6: fe80::42:43ff:fea3:2845/64 scope: link
  IF-ID-3: br-8b54aa1dd4de state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.25.X.X/16 scope: global broadcast: 172.25.X.X
  IP v6: fe80::42:bfff:fe0e:8d23/64 scope: link
  IF-ID-4: br-934f4bc89dff state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.26.X.X/16 scope: global broadcast: 172.26.X.X
  IP v6: fe80::42:b7ff:fef0:7542/64 scope: link
  IF-ID-5: br-9be3c9b00df4 state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.24.X.X/16 scope: global broadcast: 172.24.X.X
  IP v6: fe80::42:33ff:fe89:4077/64 scope: link
  IF-ID-6: br-ae0b6b9708b0 state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.31.X.X/16 scope: global broadcast: 172.31.X.X
  IF-ID-7: br-ce705a1259be state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
  IP v6: fe80::42:13ff:fe50:f52e/64 scope: link
  IF-ID-8: br-cf8b600df3a6 state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.22.X.X/16 scope: global broadcast: 172.22.X.X
  IP v6: fe80::42:abff:fe03:4724/64 scope: link
  IF-ID-9: br-daca423ae89e state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.20.X.X/16 scope: global broadcast: 172.20.X.X
  IF-ID-10: br-e3ea921712ee state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.30.X.X/16 scope: global broadcast: 172.30.X.X
  IF-ID-11: docker0 state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
  IF-ID-12: eth0 state: up speed: 1000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::b920:877e:2d:de29/64 type: noprefixroute scope: link
  IF-ID-13: veth08b915e state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-14: veth0f2a2be state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-15: veth1dea4f8 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-16: veth382fd66 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-17: veth47d6eb8 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-18: veth64dbc65 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-19: vetha7be685 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-20: vethbc94739 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-21: vethe48b20d state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-22: vethf693b0d state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  WAN IP: 109.250.X.X
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio,
    telephony
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a
    class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 931.51 GiB used: 29.88 GiB (3.2%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Lexar model: SSD NM710 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD fw-rev: SN11778 temp: 43.9 C
    scheme: MBR
  SMART: yes health: PASSED on: 1y 47d 5h cycles: 78
    read-units: 266,632 [136 GB] written-units: 3,316,675 [1.69 TB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.01 GiB size: 916.46 GiB (98.44%)
    used: 29.82 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: rootfs uuid: a36be96c-66be-4487-a7a6-0481bca99d89
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%)
    used: 68.6 MiB (13.4%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: bootfs uuid: 5DC7-F115
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 512 MiB used: 0 KiB (0.0%) priority: -2
    file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 51.4 C mobo: N/A
  Fan Speeds (rpm): cpu: 3026
Repos:
  Packages: pm: dpkg pkgs: 1948 libs: 1038 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
Processes:
  CPU top: 5 of 329
  1: cpu: 6.6% command: node pid: 2494 mem: 146.5 MiB (1.8%)
  2: cpu: 5.0% command: gunicorn started-by: python pid: 4317
    mem: 239.0 MiB (2.9%)
  3: cpu: 4.9% command: gunicorn started-by: python pid: 4315
    mem: 238.9 MiB (2.9%)
  4: cpu: 4.9% command: gunicorn started-by: python pid: 4316
    mem: 238.8 MiB (2.9%)
  5: cpu: 3.7% command: packagekitd pid: 2257 mem: 40.2 MiB (0.4%)
  Memory top: 5 of 329
  1: mem: 239.0 MiB (2.9%) command: gunicorn started-by: python pid: 4317
    cpu: 5.0%
  2: mem: 238.9 MiB (2.9%) command: gunicorn started-by: python pid: 4315
    cpu: 4.9%
  3: mem: 238.8 MiB (2.9%) command: gunicorn started-by: python pid: 4316
    cpu: 4.9%
  4: mem: 146.5 MiB (1.8%) command: node pid: 2494 cpu: 6.6%
  5: mem: 119.1 MiB (1.4%) command: mariadbd pid: 2156 cpu: 2.1%
Info:
  Processes: 329 Uptime: 1m Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: bonnie (sudo)
  default: Bash v: 5.2.15 running-in: pty pts/1 inxi: 3.3.31

Benchmark #130864 - Brand: Lexar NM710