Benchmark #13125 - pibenchmarks.com

Brand: Kingston SD Digital (SD4GB)
C10 U1
#987 / 1,539
2
#1,454 / 1,539
#357 / 369
412
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-21 03:38:37
#13,125
348
-64 (-18.39%)
Anonymous

Secure Digital (SD) Card Details
Kingston SD Digital (SD4GB)
C10 U1
3.5G
SD
Kingston
SD4GB
SDHC
3.00
0x41
42
3.0
07/2014
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Open Source Media Center
armv7l

Benchmark Results
1.5 MB/s
13.49 MB/s
14.98 MB/s
5 IOPS
1,485 IOPS
22 KB/s
5,942 KB/s
6,488 KB/s
1,063 KB/s
5,006 KB/s
22 KB/s

inxi Results
System: Kernel: 4.19.55-6-osmc armv7l bits: 32 compiler: gcc v: 6.3.0 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet osmcdev=rbp2 Console: tty 0 dm: N/A Distro: OSMC 2019.11-1 November 2019 Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1001.7 MiB used: 396.3 MiB (39.6%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 139x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.55-6-osmc Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.71 GiB used: 2.87 GiB (77.3%) ID-1: /dev/mmcblk0 model: SD4GB size: 3.71 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.47 GiB size: 3.35 GiB (96.63%) used: 2.83 GiB (84.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: 93ffb181-3f6c-445b-8b92-36b15f47b339 ID-2: /boot raw size: 243.0 MiB size: 239.2 MiB (98.46%) used: 35.7 MiB (14.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: DD08-43F5 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ftp.debian.org/debian stretch main contrib non-free 2: deb http: //ftp.debian.org/debian/ stretch-updates main contrib non-free 3: deb http: //security.debian.org/ stretch/updates main contrib non-free 4: deb http: //apt.osmc.tv stretch main Processes: CPU top: 5 1: cpu: 8.8% command: kodi.bin pid: 463 mem: 120.3 MiB (16.1%) 2: cpu: 0.1% command: [vchiq-slot/0] pid: 78 mem: 0.00 MiB (0.0%) 3: cpu: 0.0% command: init pid: 1 mem: 4.91 MiB (0.6%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 120.3 MiB (16.1%) command: kodi.bin pid: 463 cpu: 8.8% 2: mem: 5.16 MiB (0.6%) command: polkitd pid: 417 cpu: 0.0% 3: mem: 4.91 MiB (0.6%) command: init pid: 1 cpu: 0.0% 4: mem: 4.66 MiB (0.6%) command: sshd: pid: 5691 cpu: 0.0% 5: mem: 4.61 MiB (0.6%) command: connmand pid: 358 cpu: 0.0% Info: Processes: 120 Uptime: 1d 14h 41m Init: systemd v: 232 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.55-6-osmc armv7l bits: 32 compiler: gcc v: 6.3.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet 
           osmcdev=rbp2 
           Console: tty 0 dm: N/A Distro: OSMC 2019.11-1 November 2019 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1001.7 MiB used: 396.3 MiB (39.6%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 139x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.55-6-osmc 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.71 GiB used: 2.87 GiB (77.3%) 
           ID-1: /dev/mmcblk0 model: SD4GB size: 3.71 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 3.47 GiB size: 3.35 GiB (96.63%) used: 2.83 GiB (84.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: 93ffb181-3f6c-445b-8b92-36b15f47b339 
           ID-2: /boot raw size: 243.0 MiB size: 239.2 MiB (98.46%) used: 35.7 MiB (14.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: DD08-43F5 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ftp.debian.org/debian stretch main contrib non-free
           2: deb http: //ftp.debian.org/debian/ stretch-updates main contrib non-free
           3: deb http: //security.debian.org/ stretch/updates main contrib non-free
           4: deb http: //apt.osmc.tv stretch main
Processes: CPU top: 5 
           1: cpu: 8.8% command: kodi.bin pid: 463 mem: 120.3 MiB (16.1%) 
           2: cpu: 0.1% command: [vchiq-slot/0] pid: 78 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.0% command: init pid: 1 mem: 4.91 MiB (0.6%) 
           4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 120.3 MiB (16.1%) command: kodi.bin pid: 463 cpu: 8.8% 
           2: mem: 5.16 MiB (0.6%) command: polkitd pid: 417 cpu: 0.0% 
           3: mem: 4.91 MiB (0.6%) command: init pid: 1 cpu: 0.0% 
           4: mem: 4.66 MiB (0.6%) command: sshd: pid: 5691 cpu: 0.0% 
           5: mem: 4.61 MiB (0.6%) command: connmand pid: 358 cpu: 0.0% 
Info:      Processes: 120 Uptime: 1d 14h 41m Init: systemd v: 232 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #13125 - Brand: Kingston SD Digital (SD4GB)