Benchmark #131516 - pibenchmarks.com

Brand: Samsung 970 EVO Plus
SSD (M.2 NVMe)
#8 / 1,700
1,103
#171 / 1,700
#171 / 989
#161 / 284
32,210
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-02-14 11:05:09
#131,516
33,853
+1,643 (+4.85%)
Anonymous
Samsung Evo 970 on Pi5

Storage Details
Samsung 970 EVO Plus
SSD (M.2 NVMe)
465.3G
SSD
Samsung
SSD970EVOPlus500GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 13 (trixie)
aarch64

Benchmark Results
363 MB/s
412.1 MB/s
411.74 MB/s
70,136 IOPS
106,113 IOPS
280,547 KB/s
424,455 KB/s
180,574 KB/s
124,680 KB/s
63,777 KB/s
132,748 KB/s

inxi Results
System: Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c77e22b6-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1 Console: N/A DM: LightDM v: 1.32.0 Distro: Debian GNU/Linux 13 (trixie) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.87 GiB used: 3.4 GiB (43.2%) igpu: 4 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: unspecified server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6 compositor: LabWC driver: N/A tty: 80x40 API: Vulkan v: 1.4.309 layers: 2 device: 0 type: integrated-gpu name: V3D 7.1.X.X driver: N/A device-ID: 14e4:55701c33 surfaces: N/A device: 1 type: cpu name: llvmpipe (LLVM 19.1.7 128 bits) driver: N/A device-ID: 10005:0000 surfaces: N/A API: OpenGL Message: GL data unavailable in console, glxinfo missing. Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: Device-2: Realtek USB 10/100/1G/2.5G LAN driver: r8152 type: USB rev: 3.2 speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-1:2 chip-ID: 0bda:8156 class-ID: 0000 IF: eth1 state: up speed: 2500 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: virtual: proto kernel_ll scope: link IF-ID-2: eth0 state: down mac: IF-ID-3: veth00916e3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth24fa711 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth4c9d0a4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth67b5ce2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth796b898 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth9ae5b19 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethacd9159 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethcfae331 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethd860c52 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethf0f8e4c state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethf784316 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethfcb29b6 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 52.59 GiB (11.3%) ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 500GB size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD fw-rev: 2B2QEXM7 temp: 38.9 C scheme: MBR SMART: yes health: PASSED on: 1y 180d 5h cycles: 2,832 read-units: 56,880,088 [29.1 TB] written-units: 69,389,709 [35.5 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.25 GiB size: 457.85 GiB (98.41%) used: 52.52 GiB (11.5%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: 411ca88c-4698-460c-8691-dbeb5c6c14bf ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 77.4 MiB (15.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: bootfs uuid: 074D-0F4E Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile ID-2: swap-2 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Realtek USB 10/100/1G/2.5G LAN type: Network driver: r8152 interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 256mA chip-ID: 0bda:8156 class-ID: 0000 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: Silicon Labs CP210x UART Bridge type: driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 10c4:ea60 class-ID: 0000 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 36.9 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1992 libs: 1096 tools: apt,apt-get No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/influxdata.list 1: deb [signed-by=/etc/apt/keyrings/influxdata-archive.gpg] https: //repos.influxdata.com/debian stable main Active apt repos in: /etc/apt/sources.list.d/debian.sources 1: deb http: //deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware 2: deb http: //deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/docker.sources 1: deb https: //download.docker.com/linux/debian trixie stable Active apt repos in: /etc/apt/sources.list.d/raspi.sources 1: deb http: //archive.raspberrypi.com/debian/ trixie main Processes: CPU top: 5 of 401 1: cpu: 97.3% command: java pid: 4843 mem: 657.3 MiB (8.1%) 2: cpu: 26.3% command: python3 pid: 3788 mem: 625.1 MiB (7.7%) 3: cpu: 12.9% command: pironman5-service started-by: python3 pid: 4787 mem: 55.6 MiB (0.6%) 4: cpu: 7.6% command: node pid: 2753 mem: 146.7 MiB (1.8%) 5: cpu: 7.5% command: mariadbd pid: 2862 mem: 164.2 MiB (2.0%) Memory top: 5 of 401 1: mem: 657.3 MiB (8.1%) command: java pid: 4843 cpu: 97.3% 2: mem: 625.1 MiB (7.7%) command: python3 pid: 3788 cpu: 26.3% 3: mem: 291.5 MiB (3.6%) command: influxd pid: 2945 cpu: 4.6% 4: mem: 164.2 MiB (2.0%) command: mariadbd pid: 2862 cpu: 7.5% 5: mem: 163.0 MiB (2.0%) command: node pid: 4582 cpu: 4.2% Info: Processes: 401 Uptime: 1m Init: systemd v: 257 default: graphical tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0
    iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000
    vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c77e22b6-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
    cfg80211.ieee80211_regdom=GB cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1
  Console: N/A DM: LightDM v: 1.32.0 Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.87 GiB used: 3.4 GiB (43.2%) igpu: 4 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB
    L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: unspecified server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6 compositor: LabWC
    driver: N/A tty: 80x40
  API: Vulkan v: 1.4.309 layers: 2 device: 0 type: integrated-gpu name: V3D 7.1.X.X driver: N/A
    device-ID: 14e4:55701c33 surfaces: N/A device: 1 type: cpu name: llvmpipe (LLVM 19.1.7 128 bits)
    driver: N/A device-ID: 10005:0000 surfaces: N/A
  API: OpenGL Message: GL data unavailable in console, glxinfo missing.
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with: 1: pipewire-pulse status: active
    2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A
    bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: 
  Device-2: Realtek USB 10/100/1G/2.5G LAN driver: r8152 type: USB rev: 3.2 speed: 5 Gb/s
    lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-1:2 chip-ID: 0bda:8156 class-ID: 0000 IF: eth1 state: up speed: 2500 Mbps duplex: full mac: 
  IP v4:  type: noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  virtual: proto kernel_ll scope: link
  IF-ID-2: eth0 state: down mac: 
  IF-ID-3: veth00916e3 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth24fa711 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth4c9d0a4 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth67b5ce2 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth796b898 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth9ae5b19 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethacd9159 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethcfae331 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: vethd860c52 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: vethf0f8e4c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: vethf784316 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: vethfcb29b6 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 465.76 GiB used: 52.59 GiB (11.3%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 500GB
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD
    fw-rev: 2B2QEXM7 temp: 38.9 C scheme: MBR
  SMART: yes health: PASSED on: 1y 180d 5h cycles: 2,832 read-units: 56,880,088 [29.1 TB]
    written-units: 69,389,709 [35.5 TB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.25 GiB size: 457.85 GiB (98.41%) used: 52.52 GiB (11.5%) fs: ext4
    block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs
    uuid: 411ca88c-4698-460c-8691-dbeb5c6c14bf
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 77.4 MiB (15.2%) fs: vfat
    block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: bootfs uuid: 074D-0F4E
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
  ID-2: swap-2 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd
    avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: Realtek USB 10/100/1G/2.5G LAN type: Network driver: r8152 interfaces: 1
    rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 256mA chip-ID: 0bda:8156
    class-ID: 0000 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Silicon Labs CP210x UART Bridge type:  driver: cp210x
    interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 10c4:ea60 class-ID: 0000 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 36.9 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1992 libs: 1096 tools: apt,apt-get
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/influxdata.list
    1: deb [signed-by=/etc/apt/keyrings/influxdata-archive.gpg] https: //repos.influxdata.com/debian stable main
  Active apt repos in: /etc/apt/sources.list.d/debian.sources
    1: deb http: //deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware
    2: deb http: //deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/docker.sources
    1: deb https: //download.docker.com/linux/debian trixie stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.sources
    1: deb http: //archive.raspberrypi.com/debian/ trixie main
Processes:
  CPU top: 5 of 401
  1: cpu: 97.3% command: java pid: 4843 mem: 657.3 MiB (8.1%)
  2: cpu: 26.3% command: python3 pid: 3788 mem: 625.1 MiB (7.7%)
  3: cpu: 12.9% command: pironman5-service started-by: python3 pid: 4787 mem: 55.6 MiB (0.6%)
  4: cpu: 7.6% command: node pid: 2753 mem: 146.7 MiB (1.8%)
  5: cpu: 7.5% command: mariadbd pid: 2862 mem: 164.2 MiB (2.0%)
  Memory top: 5 of 401
  1: mem: 657.3 MiB (8.1%) command: java pid: 4843 cpu: 97.3%
  2: mem: 625.1 MiB (7.7%) command: python3 pid: 3788 cpu: 26.3%
  3: mem: 291.5 MiB (3.6%) command: influxd pid: 2945 cpu: 4.6%
  4: mem: 164.2 MiB (2.0%) command: mariadbd pid: 2862 cpu: 7.5%
  5: mem: 163.0 MiB (2.0%) command: node pid: 4582 cpu: 4.2%
Info:
  Processes: 401 Uptime: 1m Init: systemd v: 257 default: graphical tool: systemctl Compilers:
  gcc: 14.2.0 alt: 14 Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

Benchmark #131516 - Brand: Samsung 970 EVO Plus