Benchmark #13224 - pibenchmarks.com

Brand: Seagate Pipeline HD Mini HDD
HDD (2.5" SATA)
#1,341 / 1,679
1
#1,157 / 1,679
#37 / 69
#5 / 20
1,591
	Amazon.com AliExpress

Overview
2020-03-21 13:53:08
#13,224
1,591
0 (0.00%)
Anonymous

Storage Details
Seagate Pipeline HD Mini HDD
HDD (2.5" SATA)
500G
HDD
Seagate
ST3500312CS
Serial
5,900
1f75:0611
0x1f75 (Innostor Technology Corporation)
0x0611 (AlDiga AL-11U Quad-band GSM/GPRS/EDGE modem)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
91.8 MB/s
81.98 MB/s
65.36 MB/s
472 IOPS
150 IOPS
1,891 KB/s
600 KB/s
19,662 KB/s
21,636 KB/s
593 KB/s
1,702 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 419.9 MiB (10.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 4.10 TiB used: 3.48 TiB (84.9%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: ST350031 2CS drive model: ST3500312CS family: Pipeline HD 5900.2 size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 1.5 Gb/s rotation: 5900 rpm rev: SC13 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 277d 3h cycles: 20 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 25A3 drive model: WD40EMAZ-11ZRJB0 size: 3.64 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm rev: 1021 drive rev: 80.00A80 temp: 22 C scheme: GPT SMART: yes state: enabled health: PASSED on: 7d 7h cycles: 148 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 458.30 GiB (98.45%) used: 3.81 GiB (0.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/usbHDD raw size: 3.64 TiB size: 3.64 TiB (100.00%) used: 3.48 TiB (95.6%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: Elements uuid: CC328F9A328F8862 Unmounted: ID-1: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:25a3 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1f75:0611 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_6.x buster main 2: deb-src https: //deb.nodesource.com/node_6.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/webmin.list 1: deb http: //download.webmin.com/download/repository sarge contrib Processes: CPU top: 5 1: cpu: 0.8% command: node-red pid: 20280 mem: 115.9 MiB (2.9%) 2: cpu: 0.7% command: automatic.py started by: python3 pid: 663 mem: 9.07 MiB (0.2%) 3: cpu: 0.4% command: pure-ftpd pid: 11919 mem: 2.29 MiB (0.0%) 4: cpu: 0.0% command: init pid: 1 mem: 8.25 MiB (0.2%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 115.9 MiB (2.9%) command: node-red pid: 20280 cpu: 0.8% 2: mem: 30.5 MiB (0.7%) command: systemd-journald pid: 120 cpu: 0.0% 3: mem: 27.1 MiB (0.6%) command: rpc.mountd pid: 574 cpu: 0.0% 4: mem: 19.0 MiB (0.4%) command: apache2 pid: 629 cpu: 0.0% 5: mem: 17.6 MiB (0.4%) command: miniserv.pl started by: perl pid: 660 cpu: 0.0% Info: Processes: 178 Uptime: 1d 3h 12m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 419.9 MiB (10.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 4.10 TiB used: 3.48 TiB (84.9%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: ST350031 2CS drive model: ST3500312CS 
           family: Pipeline HD 5900.2 size: 465.76 GiB block size: physical: 512 B logical: 512 B 
           sata: 2.6 speed: 1.5 Gb/s rotation: 5900 rpm rev: SC13 temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 277d 3h cycles: 20 Pre-Fail: 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 25A3 
           drive model: WD40EMAZ-11ZRJB0 size: 3.64 TiB block size: physical: 4096 B 
           logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm rev: 1021 drive rev: 80.00A80 temp: 22 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 7d 7h cycles: 148 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 458.30 GiB (98.45%) used: 3.81 GiB (0.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/usbHDD raw size: 3.64 TiB size: 3.64 TiB (100.00%) used: 3.48 TiB (95.6%) 
           fs: ntfs block size: 4096 B dev: /dev/sdb1 label: Elements uuid: CC328F9A328F8862 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:25a3 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 1f75:0611 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_6.x buster main
           2: deb-src https: //deb.nodesource.com/node_6.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/webmin.list 
           1: deb http: //download.webmin.com/download/repository sarge contrib
Processes: CPU top: 5 
           1: cpu: 0.8% command: node-red pid: 20280 mem: 115.9 MiB (2.9%) 
           2: cpu: 0.7% command: automatic.py started by: python3 pid: 663 mem: 9.07 MiB (0.2%) 
           3: cpu: 0.4% command: pure-ftpd pid: 11919 mem: 2.29 MiB (0.0%) 
           4: cpu: 0.0% command: init pid: 1 mem: 8.25 MiB (0.2%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 115.9 MiB (2.9%) command: node-red pid: 20280 cpu: 0.8% 
           2: mem: 30.5 MiB (0.7%) command: systemd-journald pid: 120 cpu: 0.0% 
           3: mem: 27.1 MiB (0.6%) command: rpc.mountd pid: 574 cpu: 0.0% 
           4: mem: 19.0 MiB (0.4%) command: apache2 pid: 629 cpu: 0.0% 
           5: mem: 17.6 MiB (0.4%) command: miniserv.pl started by: perl pid: 660 cpu: 0.0% 
Info:      Processes: 178 Uptime: 1d 3h 12m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13224 - Brand: Seagate Pipeline HD Mini HDD