Benchmark #132278 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,819
#371 / 1,700
#358 / 989
#35 / 370
8,143
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-03-11 09:55:55
#132,278
9,267
+1,124 (+12.13%)
Anonymous
yy

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
1000G
SSD
SanDisk
SSDPLUS1000GB
2.5 inch
SATA
3.00
5,000
7825:a2a4
0x7825 (Other World Computing)
0xa2a4 (External SATA Hard Drive Adapter cable PA023U3)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 13 (trixie)
aarch64

Benchmark Results
305 MB/s
299.07 MB/s
145.65 MB/s
20,834 IOPS
22,407 IOPS
83,336 KB/s
89,628 KB/s
14,973 KB/s
22,060 KB/s
14,952 KB/s
21,966 KB/s

inxi Results
System: Host: pi5 Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=5da57a24-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE Console: pty pts/1 Distro: Debian GNU/Linux 13 (trixie) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: c04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB available: 3.95 GiB used: 603.5 MiB (14.9%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc@107c000000 class-ID: fb Display: unspecified server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6 driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: bcm2708_fb display-ID: localhost:10.0 API: Vulkan Message: No Vulkan data available. API: OpenGL Message: Unable to show GL data. glxinfo is missing. Audio: Message: No device data found. API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 17.0 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v4: 192.168.X.X/24 type: secondary dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a00:6020:47c6:5b00:da3a:ddff:feec:d310/128 type: dynamic noprefixroute scope: global IP v6: fd00::d9bb:d79f:65f4:7f20/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2003:f6:c745:9600:d0a:1ba2:da46:67af/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fd62:ac28:f4ef:0:f1a8:a5ac:7707:3697/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2a00:6020:47c6:5b00:3999:3b4d:4b2f:797d/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::da3a:ddff:feec:d310/64 virtual: proto kernel_ll scope: link IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd00::2322:7e0f:e793:58de/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2003:f6:c745:9600:cee3:adcc:8056:680c/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2a00:6020:47c6:5b00:9b15:c650:9930:449a/128 type: dynamic noprefixroute scope: global IP v6: fd62:ac28:f4ef:0:bedf:9cde:5099:975e/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2a00:6020:47c6:5b00:216c:c4a:1927:6d5a/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2a00:6020:47c6:5b00:309a:51fd:250f:2e3e/64 type: dynamic noprefixroute scope: global IP v6: fd62:ac28:f4ef:0:15d0:4692:ef69:f60f/64 type: dynamic noprefixroute scope: global IP v6: 2003:f6:c745:9600:a35b:8e22:d34f:484d/64 type: dynamic noprefixroute scope: global IP v6: fd00::96f4:ee80:b826:77b0/64 type: dynamic noprefixroute scope: global Message: Output throttled. IPs: 12! Limit: 10! Override: --limit [1-x!-1 all] WAN IP: 94.31.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 931.51 GiB used: 13.76 GiB (1.5%) ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 1000GB family: Marvell based SSDs size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 4101 drive-rev: UH4504RL temp: 45 C scheme: MBR SMART: yes state: enabled health: PASSED on: 43d 8h cycles: 217 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 931.01 GiB size: 915.32 GiB (98.31%) used: 13.69 GiB (1.5%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 10021f0a-22ff-4b6b-9ed3-7572873a7caa ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 77.6 MiB (15.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: CF97-71F1 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Other World External SATA Hard Drive Adapter cable PA023U3 type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 7825:a2a4 class-ID: 0806 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 61.7 C mobo: N/A Fan Speeds (rpm): cpu: 4023 Repos: Packages: pm: dpkg pkgs: 1954 libs: 1080 tools: apt,apt-get No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/debian.sources 1: deb http://deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.sources 1: deb http://archive.raspberrypi.com/debian/ trixie main Processes: CPU top: 5 of 203 1: cpu: 1.0% command: init pid: 1 mem: 15.1 MiB (0.3%) 2: cpu: 0.4% command: cloud-init started-by: python3 pid: 355 mem: 50.7 MiB (1.2%) 3: cpu: 0.2% command: dbus-daemon pid: 814 mem: 5.94 MiB (0.1%) 4: cpu: 0.1% command: [kworker/u17:0-events_unbound] pid: 38 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/1:1h-kblockd] pid: 65 mem: 0.00 MiB (0.0%) Memory top: 5 of 203 1: mem: 50.7 MiB (1.2%) command: cloud-init started-by: python3 pid: 355 cpu: 0.4% 2: mem: 29.3 MiB (0.7%) command: postgres pid: 1337 cpu: 0.0% 3: mem: 28.6 MiB (0.7%) command: wireplumber pid: 1477 cpu: 0.1% 4: mem: 21.1 MiB (0.5%) command: networkmanager pid: 943 cpu: 0.0% 5: mem: 21.0 MiB (0.5%) command: packagekitd pid: 2089 cpu: 0.1% Info: Processes: 203 Uptime: 2m Init: systemd v: 257 default: multi-user tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Shell: Storage.sh (sudo) default: Bash v: 5.2.37 running-in: Storage.sh inxi: 3.3.31

inxi Results

System:
  Host: pi5 Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A
    clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M
    8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=0
    bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16
    bcm2708_fb.fbswap=1 numa=fake=8 system_heap.max_order=0
    iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    console=ttyAMA10,115200 console=tty1 root=PARTUUID=5da57a24-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet splash
    plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE
  Console: pty pts/1 Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: c04170
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB available: 3.95 GiB used: 603.5 MiB (14.9%)
    igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 512 KiB
    desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB
    desc: 1x2 MiB
  Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A
    chip-ID: brcm:soc@107c000000 class-ID: fb
  Display: unspecified server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6
    driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: bcm2708_fb
    display-ID: localhost:10.0
  API: Vulkan Message: No Vulkan data available.
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Message: No device data found.
  API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 17.0 status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel
    port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v4: 192.168.X.X/24 type: secondary dynamic noprefixroute
    scope: global broadcast: 192.168.X.X
  IP v6: 2a00:6020:47c6:5b00:da3a:ddff:feec:d310/128
    type: dynamic noprefixroute scope: global
  IP v6: fd00::d9bb:d79f:65f4:7f20/64 type: dynamic mngtmpaddr noprefixroute
    scope: global
  IP v6: 2003:f6:c745:9600:d0a:1ba2:da46:67af/64 type: dynamic mngtmpaddr
    noprefixroute scope: global
  IP v6: fd62:ac28:f4ef:0:f1a8:a5ac:7707:3697/64 type: dynamic mngtmpaddr
    noprefixroute scope: global
  IP v6: 2a00:6020:47c6:5b00:3999:3b4d:4b2f:797d/64 type: dynamic
    mngtmpaddr noprefixroute scope: global
  IP v6: fe80::da3a:ddff:feec:d310/64 virtual: proto kernel_ll scope: link
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fd00::2322:7e0f:e793:58de/64 type: dynamic mngtmpaddr noprefixroute
    scope: global
  IP v6: 2003:f6:c745:9600:cee3:adcc:8056:680c/64 type: dynamic mngtmpaddr
    noprefixroute scope: global
  IP v6: 2a00:6020:47c6:5b00:9b15:c650:9930:449a/128
    type: dynamic noprefixroute scope: global
  IP v6: fd62:ac28:f4ef:0:bedf:9cde:5099:975e/64 type: dynamic mngtmpaddr
    noprefixroute scope: global
  IP v6: 2a00:6020:47c6:5b00:216c:c4a:1927:6d5a/64 type: dynamic mngtmpaddr
    noprefixroute scope: global
  IP v6: 2a00:6020:47c6:5b00:309a:51fd:250f:2e3e/64
    type: dynamic noprefixroute scope: global
  IP v6: fd62:ac28:f4ef:0:15d0:4692:ef69:f60f/64 type: dynamic noprefixroute
    scope: global
  IP v6: 2003:f6:c745:9600:a35b:8e22:d34f:484d/64
    type: dynamic noprefixroute scope: global
  IP v6: fd00::96f4:ee80:b826:77b0/64 type: dynamic noprefixroute
    scope: global
  Message: Output throttled. IPs: 12! Limit: 10! Override: --limit [1-x!-1
    all]
  WAN IP: 94.31.X.X
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio,
    telephony
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a
    class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 931.51 GiB used: 13.76 GiB (1.5%)
  ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 1000GB
    family: Marvell based SSDs size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 4101
    drive-rev: UH4504RL temp: 45 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 43d 8h cycles: 217
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.01 GiB size: 915.32 GiB (98.31%)
    used: 13.69 GiB (1.5%) fs: ext4 block-size: 4096 B dev: /dev/sda2
    maj-min: 8:2 label: rootfs uuid: 10021f0a-22ff-4b6b-9ed3-7572873a7caa
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%)
    used: 77.6 MiB (15.2%) fs: vfat block-size: 512 B dev: /dev/sda1
    maj-min: 8:1 label: bootfs uuid: CF97-71F1
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: Other World External SATA Hard Drive Adapter cable
    PA023U3 type: mass storage driver: uas interfaces: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
    chip-ID: 7825:a2a4 class-ID: 0806   Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 61.7 C mobo: N/A
  Fan Speeds (rpm): cpu: 4023
Repos:
  Packages: pm: dpkg pkgs: 1954 libs: 1080 tools: apt,apt-get
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian.sources
    1: deb http://deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.sources
    1: deb http://archive.raspberrypi.com/debian/ trixie main
Processes:
  CPU top: 5 of 203
  1: cpu: 1.0% command: init pid: 1 mem: 15.1 MiB (0.3%)
  2: cpu: 0.4% command: cloud-init started-by: python3 pid: 355
    mem: 50.7 MiB (1.2%)
  3: cpu: 0.2% command: dbus-daemon pid: 814 mem: 5.94 MiB (0.1%)
  4: cpu: 0.1% command: [kworker/u17:0-events_unbound] pid: 38
    mem: 0.00 MiB (0.0%)
  5: cpu: 0.1% command: [kworker/1:1h-kblockd] pid: 65 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 203
  1: mem: 50.7 MiB (1.2%) command: cloud-init started-by: python3 pid: 355
    cpu: 0.4%
  2: mem: 29.3 MiB (0.7%) command: postgres pid: 1337 cpu: 0.0%
  3: mem: 28.6 MiB (0.7%) command: wireplumber pid: 1477 cpu: 0.1%
  4: mem: 21.1 MiB (0.5%) command: networkmanager pid: 943 cpu: 0.0%
  5: mem: 21.0 MiB (0.5%) command: packagekitd pid: 2089 cpu: 0.1%
Info:
  Processes: 203 Uptime: 2m Init: systemd v: 257 default: multi-user
  tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Shell: Storage.sh (sudo)
  default: Bash v: 5.2.37 running-in: Storage.sh inxi: 3.3.31

Benchmark #132278 - Brand: SanDisk SSD Plus