Benchmark #132586 - pibenchmarks.com

Brand: EDILOCA EN600 Pro
SSD (M.2 NVMe)
#171 / 1,700
106
#42 / 1,700
#42 / 989
#41 / 284
48,168
	Amazon.com AliExpress

Overview
2026-03-25 14:32:18
#132,586
45,409
-2,759 (-6.08%)
Anonymous

Storage Details
EDILOCA EN600 Pro
SSD (M.2 NVMe)
476.4G
SSD
EDILOCA
EN600Pro512GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.1
Raspberry Pi 5 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Ubuntu 25.10
aarch64

Benchmark Results
379 MB/s
726.49 MB/s
579.56 MB/s
50,319 IOPS
198,834 IOPS
201,277 KB/s
795,339 KB/s
228,186 KB/s
186,634 KB/s
73,575 KB/s
214,524 KB/s

inxi Results
System: Kernel: 6.17.0-1008-raspi arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 zswap.enabled=1 zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 panic=10 rootwait fixrtc quiet splash Console: pty pts/0 DM: GDM3 v: 49.0.1 Distro: Ubuntu 25.10 (Questing Quokka) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.1 details: N/A rev: e04171 Battery: Device-1: hidpp_battery_0 model: Logitech M720 Triathlon Multi-Device Mouse charge: 55% (should be ignored) rechargeable: yes status: discharging Memory: System RAM: total: 16 GiB available: 15.59 GiB used: 1.52 GiB (9.7%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 1550 high: 1700 min/max: 1500/2400 boost: disabled scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1700 4: 1500 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: ghostwrite status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: old_microcode status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Use of uninitialized value $val2 in string eq at ./inxi line 7464. Use of uninitialized value $val2 in split at ./inxi line 7469. Use of uninitialized value $val2 in concatenation (.) or string at ./inxi line 7472. Use of uninitialized value $val2 in concatenation (.) or string at ./inxi line 7475. Use of uninitialized value $val2 in concatenation (.) or string at ./inxi line 7476. Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: unspecified server: Xwayland v: 24.1.6 compositor: gnome-shell driver: gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec tty: 80x40 Monitor-1: HDMI-A-1 model: BenQ EW3280U built: 2019 res: 3840x2160 dpi: 139 gamma: 1.2 chroma: red: x: 0.682 y: 0.310 green: x: 0.267 y: 0.678 blue: x: 0.153 y: 0.043 white: x: 0.314 y: 0.329 size: 708x399mm (27.87x15.71") diag: 806mm (31.7") ratio: 16:9 modes: 3840x2160, 2560x1440, 1920x1080, 1920x1080i, 1680x1050, 1600x900, 1280x1024, 1280x800, 1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480, 640x480, 720x400 EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid: unhandled CEA mode 96 3: parse_edid: unhandled CEA mode 95 4: parse_edid: unhandled CEA mode 94 5: parse_edid: unhandled CEA mode 93 API: EGL Message: Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.17.0-1008-raspi status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.4.7 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pw-cat,pw-cli,wpctl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel modules: rp1_pci port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link WAN IP: Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 476.94 GiB used: 7.8 GiB (1.6%) ID-1: /dev/nvme0n1 maj-min: 259:0 model: EDILOCA EN600Pro 512GB size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD fw-rev: GT18c634 temp: 39.9 C scheme: MBR SMART: yes health: PASSED cycles: 10 read-units: 50,739 [25.9 GB] written-units: 52,131 [26.6 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 476.44 GiB size: 468.89 GiB (98.42%) used: 7.6 GiB (1.6%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: writable uuid: c418dc3c-288d-475d-b6d2-48008dea7829 ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 206.2 MiB (40.9%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: system-boot uuid: 0808-11DE Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd max-pool: 20% ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /swapfile Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-3: 3-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 4-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 4-2:2 info: Trust DESKSET type: mouse,keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 50mA chip-ID: 145f:01e7 class-ID: 0301 Hub-5: 5-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 55.5 C mobo: N/A Fan Speeds (rpm): cpu: 3208 Repos: Packages: 1508 pm: dpkg pkgs: 1497 libs: 769 tools: apt,apt-get pm: snap pkgs: 11 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources 1: deb http: //ports.ubuntu.com/ubuntu-ports questing questing-updates questing-backports main universe restricted multiverse 2: deb http: //ports.ubuntu.com/ubuntu-ports questing-security main universe restricted multiverse Processes: CPU top: 5 of 255 1: cpu: 5.5% command: gnome-shell pid: 2450 mem: 380.9 MiB (2.3%) 2: cpu: 5.4% command: ibus-extension-gtk3 pid: 2796 mem: 32.3 MiB (0.2%) 3: cpu: 1.4% command: systemd pid: 2185 mem: 14.0 MiB (0.0%) 4: cpu: 0.8% command: init pid: 1 mem: 15.5 MiB (0.0%) 5: cpu: 0.7% command: ding.js started-by: gjs pid: 3064 mem: 138.4 MiB (0.8%) Memory top: 5 of 255 1: mem: 380.9 MiB (2.3%) command: gnome-shell pid: 2450 cpu: 5.5% 2: mem: 138.4 MiB (0.8%) command: ding.js started-by: gjs pid: 3064 cpu: 0.7% 3: mem: 61.6 MiB (0.3%) command: evolution-alarm-notify pid: 2579 cpu: 0.2% 4: mem: 43.0 MiB (0.2%) command: snapd pid: 1160 cpu: 0.4% 5: mem: 40.4 MiB (0.2%) command: xdg-desktop-portal-gnome pid: 3030 cpu: 0.2% Info: Processes: 255 Uptime: 4m Init: systemd v: 257 default: graphical tool: systemctl Compilers: N/A Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.17.0-1008-raspi arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe numa_policy=interleave
    nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    zswap.enabled=1 zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1
    root=LABEL=writable rootfstype=ext4 panic=10 rootwait fixrtc quiet splash
  Console: pty pts/0 DM: GDM3 v: 49.0.1 Distro: Ubuntu 25.10 (Questing Quokka)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.1 details: N/A rev: e04171 Battery:
  Device-1: hidpp_battery_0 model: Logitech M720 Triathlon Multi-Device Mouse charge: 55% (should be ignored) rechargeable: yes status: discharging
Memory:
  System RAM: total: 16 GiB available: 15.59 GiB used: 1.52 GiB (9.7%) igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB
    desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 1550 high: 1700 min/max: 1500/2400 boost: disabled scaling:
    driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1700 4: 1500 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Use of uninitialized value $val2 in string eq at ./inxi line 7464.
Use of uninitialized value $val2 in split at ./inxi line 7469.
Use of uninitialized value $val2 in concatenation (.) or string at ./inxi line 7472.
Use of uninitialized value $val2 in concatenation (.) or string at ./inxi line 7475.
Use of uninitialized value $val2 in concatenation (.) or string at ./inxi line 7476.
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: unspecified server: Xwayland v: 24.1.6 compositor: gnome-shell driver:
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    tty: 80x40
  Monitor-1: HDMI-A-1 model: BenQ EW3280U built: 2019 res: 3840x2160 dpi: 139
    gamma: 1.2 chroma: red: x: 0.682 y: 0.310 green: x: 0.267 y: 0.678 blue: x: 0.153 y: 0.043 white:
    x: 0.314 y: 0.329 size: 708x399mm (27.87x15.71") diag: 806mm (31.7") ratio: 16:9
    modes: 3840x2160, 2560x1440, 1920x1080, 1920x1080i, 1680x1050, 1600x900, 1280x1024, 1280x800,
    1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480, 640x480, 720x400
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 2: parse_edid: unhandled CEA mode 96
    3: parse_edid: unhandled CEA mode 95 4: parse_edid: unhandled CEA mode 94 5: parse_edid:
    unhandled CEA mode 93
  API: EGL Message:
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.17.0-1008-raspi status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.4.7 status: n/a (root, process) with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pw-cat,pw-cli,wpctl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel modules: rp1_pci port: N/A
    bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic noprefixroute scope: global
  IP v6:  type: noprefixroute scope: link
  WAN IP: 
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 476.94 GiB used: 7.8 GiB (1.6%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 model: EDILOCA EN600Pro 512GB size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD fw-rev: GT18c634 temp: 39.9 C scheme: MBR
  SMART: yes health: PASSED cycles: 10 read-units: 50,739 [25.9 GB]
    written-units: 52,131 [26.6 GB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 476.44 GiB size: 468.89 GiB (98.42%) used: 7.6 GiB (1.6%) fs: ext4
    block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: writable
    uuid: c418dc3c-288d-475d-b6d2-48008dea7829
  ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 206.2 MiB (40.9%)
    fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: system-boot uuid: 0808-11DE
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd
    max-pool: 20%
  ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-3: 3-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 4-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 4-2:2 info: Trust DESKSET type: mouse,keyboard driver: hid-generic,usbhid
    interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 50mA
    chip-ID: 145f:01e7 class-ID: 0301
  Hub-5: 5-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 55.5 C mobo: N/A
  Fan Speeds (rpm): cpu: 3208
Repos:
  Packages: 1508 pm: dpkg pkgs: 1497 libs: 769 tools: apt,apt-get pm: snap pkgs: 11
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources
    1: deb http: //ports.ubuntu.com/ubuntu-ports questing questing-updates questing-backports main universe restricted multiverse
    2: deb http: //ports.ubuntu.com/ubuntu-ports questing-security main universe restricted multiverse
Processes:
  CPU top: 5 of 255
  1: cpu: 5.5% command: gnome-shell pid: 2450 mem: 380.9 MiB (2.3%)
  2: cpu: 5.4% command: ibus-extension-gtk3 pid: 2796 mem: 32.3 MiB (0.2%)
  3: cpu: 1.4% command: systemd pid: 2185 mem: 14.0 MiB (0.0%)
  4: cpu: 0.8% command: init pid: 1 mem: 15.5 MiB (0.0%)
  5: cpu: 0.7% command: ding.js started-by: gjs pid: 3064 mem: 138.4 MiB (0.8%)
  Memory top: 5 of 255
  1: mem: 380.9 MiB (2.3%) command: gnome-shell pid: 2450 cpu: 5.5%
  2: mem: 138.4 MiB (0.8%) command: ding.js started-by: gjs pid: 3064 cpu: 0.7%
  3: mem: 61.6 MiB (0.3%) command: evolution-alarm-notify pid: 2579 cpu: 0.2%
  4: mem: 43.0 MiB (0.2%) command: snapd pid: 1160 cpu: 0.4%
  5: mem: 40.4 MiB (0.2%) command: xdg-desktop-portal-gnome pid: 3030 cpu: 0.2%
Info:
  Processes: 255 Uptime: 4m Init: systemd v: 257 default: graphical tool: systemctl Compilers: N/A
  Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

Benchmark #132586 - Brand: EDILOCA EN600 Pro