Benchmark #13262 - pibenchmarks.com

Brand: Samsung T5 Portable
SSD (Portable)
#18 / 1,700
703
#398 / 1,700
#384 / 989
#44 / 145
7,912
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-21 19:48:07
#13,262
8,651
+739 (+8.54%)
Anonymous

Storage Details
Samsung T5 Portable
SSD (Portable)
500G
SSD
Samsung
PortableSSDT5
mSATA
SATA
04e8:61f5
0x04e8 (Samsung Electronics Co., Ltd)
0x61f5
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600

Operating System

CentOS Linux 7 (AltArch)
armv7l

Benchmark Results
164 MB/s
193.48 MB/s
186.45 MB/s
11,252 IOPS
14,659 IOPS
45,010 KB/s
58,639 KB/s
36,237 KB/s
31,757 KB/s
25,568 KB/s
35,584 KB/s

inxi Results
System: Host: stock.kn.idv.tw Kernel: 4.19.110-v7l.1.el7 armv7l bits: 32 compiler: gcc v: 4.8.5 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda3 rootfstype=ext4 elevator=deadline rootwait Console: N/A dm: N/A Distro: CentOS Linux release 7.7.1908 (AltArch) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 257.6 MiB (6.5%) gpu: 76.0 MiB RAM Report: missing: Required program dmidecode not available PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::47d9:2c9:f63c:1176/64 type: noprefixroute scope: link IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::70d7:3bad:cbec:c31f/64 type: noprefixroute scope: link WAN IP: 218.161.X.X Drives: Local Storage: total: 495.48 GiB used: 14.47 GiB (2.9%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: Portable SSD T5 size: 465.76 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 457.48 GiB size: 450.18 GiB (98.40%) used: 14.41 GiB (3.2%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A uuid: 2d633173-f897-44f2-8bb2-09b7ce936d4c ID-2: /boot raw size: 286.0 MiB size: 285.8 MiB (99.94%) used: 57.1 MiB (20.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: AF94-12D3 ID-3: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda2 label: N/A uuid: 76040cb2-170b-4040-a3e1-1769e96a7a21 Unmounted: ID-1: /dev/mmcblk0p2 size: 488.0 MiB fs: swap label: _swap uuid: d61648c4-62a4-4ad7-84ca-4913ae013c7b ID-2: /dev/mmcblk0p3 size: 1.40 GiB fs: ext4 label: _/ uuid: f28e182b-76a9-4f22-9a79-d49691313906 ID-3: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 54D6-AFAB USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Full speed (or root) Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Samsung Portable SSD T5 type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 04e8:61f5 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: No active yum repos in: /etc/yum.conf Active yum repos in: /etc/yum.repos.d/CentOS-Base.repo 1: base ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra 2: extras ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra 3: centosplus ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra No active yum repos in: /etc/yum.repos.d/CentOS-CR.repo No active yum repos in: /etc/yum.repos.d/CentOS-Debuginfo.repo No active yum repos in: /etc/yum.repos.d/CentOS-Sources.repo No active yum repos in: /etc/yum.repos.d/CentOS-Testing.repo No active yum repos in: /etc/yum.repos.d/CentOS-Vault.repo Active yum repos in: /etc/yum.repos.d/CentOS-armhfp-kernel.repo 1: centos-kernel ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=kernel-kernel-$kvariant&infra=$infra No active yum repos in: /etc/yum.repos.d/CentOS-fasttrack.repo Active yum repos in: /etc/yum.repos.d/epel.repo 1: epel ~ https://armv7.dev.centos.org/repodir/epel-pass-1/ Processes: CPU top: 5 1: cpu: 1.5% command: bash pid: 7536 mem: 2.54 MiB (0.0%) 2: cpu: 1.3% command: su pid: 7521 mem: 4.18 MiB (0.1%) 3: cpu: 0.4% command: -bash pid: 7454 mem: 3.03 MiB (0.0%) 4: cpu: 0.3% command: sshd: pid: 7315 mem: 7.85 MiB (0.2%) 5: cpu: 0.3% command: tmux pid: 7453 mem: 2.62 MiB (0.0%) Memory top: 5 1: mem: 52.8 MiB (1.3%) command: mysqld pid: 1012 cpu: 0.0% 2: mem: 16.4 MiB (0.4%) command: python2 pid: 462 cpu: 0.0% 3: mem: 12.2 MiB (0.3%) command: polkitd pid: 259 cpu: 0.0% 4: mem: 12.0 MiB (0.3%) command: networkmanager pid: 275 cpu: 0.0% 5: mem: 7.85 MiB (0.2%) command: sshd: pid: 7315 cpu: 0.3% Info: Processes: 113 Uptime: 11h 50m Init: systemd v: 219 runlevel: 5 target: graphical.target Compilers: gcc: 4.8.5 Shell: Storage.sh inxi: 3.0.38

inxi Results

System:
  Host: stock.kn.idv.tw Kernel: 4.19.110-v7l.1.el7 armv7l bits: 32 
  compiler: gcc v: 4.8.5 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 
  bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=/dev/sda3 rootfstype=ext4 elevator=deadline rootwait 
  Console: N/A dm: N/A Distro: CentOS Linux release 7.7.1908 (AltArch) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.89 GiB used: 257.6 MiB (6.5%) gpu: 76.0 MiB 
  RAM Report: missing: Required program dmidecode not available 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 540 
  Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 
  3: 750 4: 750 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: No display server data found. Headless machine? 
  tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::47d9:2c9:f63c:1176/64 type: noprefixroute scope: link 
  IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: noprefixroute dynamic scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::70d7:3bad:cbec:c31f/64 type: noprefixroute scope: link 
  WAN IP: 218.161.X.X 
Drives:
  Local Storage: total: 495.48 GiB used: 14.47 GiB (2.9%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  ID-2: /dev/sda type: USB vendor: Samsung model: Portable SSD T5 
  size: 465.76 GiB block size: physical: 512 B logical: 512 B 
  scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 457.48 GiB size: 450.18 GiB (98.40%) 
  used: 14.41 GiB (3.2%) fs: ext4 block size: 4096 B dev: /dev/sda3 
  label: N/A uuid: 2d633173-f897-44f2-8bb2-09b7ce936d4c 
  ID-2: /boot raw size: 286.0 MiB size: 285.8 MiB (99.94%) 
  used: 57.1 MiB (20.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: N/A uuid: AF94-12D3 
  ID-3: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap 
  swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda2 
  label: N/A uuid: 76040cb2-170b-4040-a3e1-1769e96a7a21 
Unmounted:
  ID-1: /dev/mmcblk0p2 size: 488.0 MiB fs: swap label: _swap 
  uuid: d61648c4-62a4-4ad7-84ca-4913ae013c7b 
  ID-2: /dev/mmcblk0p3 size: 1.40 GiB fs: ext4 label: _/ 
  uuid: f28e182b-76a9-4f22-9a79-d49691313906 
  ID-3: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 54D6-AFAB 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Full speed (or root) Hub ports: 4 rev: 2.1 
  speed: 480 Mb/s chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Device-1: 2-2:2 info: Samsung Portable SSD T5 type: Mass Storage 
  driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 04e8:61f5 Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  No active yum repos in: /etc/yum.conf 
  Active yum repos in: /etc/yum.repos.d/CentOS-Base.repo 
  1: base ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
  2: extras ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
  3: centosplus ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
  No active yum repos in: /etc/yum.repos.d/CentOS-CR.repo 
  No active yum repos in: /etc/yum.repos.d/CentOS-Debuginfo.repo 
  No active yum repos in: /etc/yum.repos.d/CentOS-Sources.repo 
  No active yum repos in: /etc/yum.repos.d/CentOS-Testing.repo 
  No active yum repos in: /etc/yum.repos.d/CentOS-Vault.repo 
  Active yum repos in: /etc/yum.repos.d/CentOS-armhfp-kernel.repo 
  1: centos-kernel ~ http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=kernel-kernel-$kvariant&infra=$infra
  No active yum repos in: /etc/yum.repos.d/CentOS-fasttrack.repo 
  Active yum repos in: /etc/yum.repos.d/epel.repo 
  1: epel ~ https://armv7.dev.centos.org/repodir/epel-pass-1/
Processes:
  CPU top: 5 
  1: cpu: 1.5% command: bash pid: 7536 mem: 2.54 MiB (0.0%) 
  2: cpu: 1.3% command: su pid: 7521 mem: 4.18 MiB (0.1%) 
  3: cpu: 0.4% command: -bash pid: 7454 mem: 3.03 MiB (0.0%) 
  4: cpu: 0.3% command: sshd: pid: 7315 mem: 7.85 MiB (0.2%) 
  5: cpu: 0.3% command: tmux pid: 7453 mem: 2.62 MiB (0.0%) 
  Memory top: 5 
  1: mem: 52.8 MiB (1.3%) command: mysqld pid: 1012 cpu: 0.0% 
  2: mem: 16.4 MiB (0.4%) command: python2 pid: 462 cpu: 0.0% 
  3: mem: 12.2 MiB (0.3%) command: polkitd pid: 259 cpu: 0.0% 
  4: mem: 12.0 MiB (0.3%) command: networkmanager pid: 275 cpu: 0.0% 
  5: mem: 7.85 MiB (0.2%) command: sshd: pid: 7315 cpu: 0.3% 
Info:
  Processes: 113 Uptime: 11h 50m Init: systemd v: 219 runlevel: 5 
  target: graphical.target Compilers: gcc: 4.8.5 Shell: Storage.sh 
  inxi: 3.0.38

Benchmark #13262 - Brand: Samsung T5 Portable