Benchmark #13307 - pibenchmarks.com

Brand: Transcend SSD300 Series
SSD (2.5" SATA)
#205 / 1,700
88
#841 / 1,700
#807 / 989
#260 / 370
5,157
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-22 02:42:32
#13,307
2,226
-2,931 (-131.67%)
Anonymous
Transcend SSD370 on Pi3B+

Storage Details
Transcend SSD300 Series
SSD (2.5" SATA)
32G
SSD
Transcend
TS32GSSD370S
SATA
2.10
480
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
27.7 MB/s
26.65 MB/s
23.45 MB/s
2,487 IOPS
2,341 IOPS
9,948 KB/s
9,367 KB/s
10,995 KB/s
10,315 KB/s
8,497 KB/s
10,542 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1003.7 MiB used: 690.2 MiB (68.8%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute dynamic scope: global IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 44.66 GiB used: 8.83 GiB (19.8%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS32GSSD370S family: based SSDs size: 29.82 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: N1114H temp: 46 C scheme: MBR SMART: yes state: enabled health: PASSED on: 90d 17h cycles: 979 read: 718.94 GiB written: 495.31 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.49 GiB size: 29.00 GiB (98.35%) used: 8.79 GiB (30.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 0aed834e-8c8f-412d-a276-a265dc676112 ID-2: /boot raw size: 337.3 MiB size: 337.0 MiB (99.92%) used: 23.7 MiB (7.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: F63B-EF50 ID-3: /media/pi/BOOT raw size: 337.3 MiB size: 337.0 MiB (99.92%) used: 23.7 MiB (7.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: BOOT uuid: F63B-EF50 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.51 GiB fs: ext4 label: N/A uuid: 0aed834e-8c8f-412d-a276-a265dc676112 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:5 info: Alcor Micro AU9540 Smartcard Reader type: Smart Card driver: usbfs interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 058f:9540 Device-3: 1-1.2:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:55aa Device-4: 1-1.3:4 info: Microsoft type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:0800 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/webupd8team-java.list 1: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main 2: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main Processes: CPU top: 5 1: cpu: 27.0% command: xorg pid: 817 mem: 43.5 MiB (5.8%) 2: cpu: 12.3% command: galaxy pid: 6986 mem: 4.15 MiB (0.5%) 3: cpu: 7.7% command: kodi-rbpi_v7 pid: 1280 mem: 69.7 MiB (9.3%) 4: cpu: 2.6% command: java pid: 1442 mem: 121.2 MiB (16.2%) 5: cpu: 1.3% command: oscam pid: 764 mem: 2.42 MiB (0.3%) Memory top: 5 1: mem: 121.2 MiB (16.2%) command: java pid: 1442 cpu: 2.6% 2: mem: 69.7 MiB (9.3%) command: kodi-rbpi_v7 pid: 1280 cpu: 7.7% 3: mem: 43.5 MiB (5.8%) command: xorg pid: 817 cpu: 27.0% 4: mem: 39.6 MiB (5.2%) command: bin/mongod pid: 1597 cpu: 0.5% 5: mem: 38.5 MiB (5.1%) command: unifi pid: 803 cpu: 0.5% Info: Processes: 169 Uptime: 38m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 4.9/6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 
           bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1003.7 MiB used: 690.2 MiB (68.8%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 44.66 GiB used: 8.83 GiB (19.8%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS32GSSD370S family: based SSDs 
           size: 29.82 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rev: N1114H temp: 46 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 90d 17h cycles: 979 read: 718.94 GiB 
           written: 495.31 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.49 GiB size: 29.00 GiB (98.35%) used: 8.79 GiB (30.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 0aed834e-8c8f-412d-a276-a265dc676112 
           ID-2: /boot raw size: 337.3 MiB size: 337.0 MiB (99.92%) used: 23.7 MiB (7.0%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: BOOT uuid: F63B-EF50 
           ID-3: /media/pi/BOOT raw size: 337.3 MiB size: 337.0 MiB (99.92%) used: 23.7 MiB (7.0%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: BOOT uuid: F63B-EF50 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.51 GiB fs: ext4 label: N/A 
           uuid: 0aed834e-8c8f-412d-a276-a265dc676112 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:5 info: Alcor Micro AU9540 Smartcard Reader type: Smart Card 
           driver: usbfs interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 058f:9540 
           Device-3: 1-1.2:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 174c:55aa Device-4: 1-1.3:4 info: Microsoft type: Keyboard,Mouse,HID driver: hid-generic,usbhid 
           interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:0800 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/webupd8team-java.list 
           1: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
           2: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu xenial main
Processes: CPU top: 5 
           1: cpu: 27.0% command: xorg pid: 817 mem: 43.5 MiB (5.8%) 
           2: cpu: 12.3% command: galaxy pid: 6986 mem: 4.15 MiB (0.5%) 
           3: cpu: 7.7% command: kodi-rbpi_v7 pid: 1280 mem: 69.7 MiB (9.3%) 
           4: cpu: 2.6% command: java pid: 1442 mem: 121.2 MiB (16.2%) 
           5: cpu: 1.3% command: oscam pid: 764 mem: 2.42 MiB (0.3%) 
           Memory top: 5 
           1: mem: 121.2 MiB (16.2%) command: java pid: 1442 cpu: 2.6% 
           2: mem: 69.7 MiB (9.3%) command: kodi-rbpi_v7 pid: 1280 cpu: 7.7% 
           3: mem: 43.5 MiB (5.8%) command: xorg pid: 817 cpu: 27.0% 
           4: mem: 39.6 MiB (5.2%) command: bin/mongod pid: 1597 cpu: 0.5% 
           5: mem: 38.5 MiB (5.1%) command: unifi pid: 803 cpu: 0.5% 
Info:      Processes: 169 Uptime: 38m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 4.9/6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #13307 - Brand: Transcend SSD300 Series