Benchmark #133225 - pibenchmarks.com

Brand: Samsung eMMC (FE2Y7)
A2 C10 V30 U3
#634 / 1,700
12
#990 / 1,700
#5 / 404
3,478

Overview
2026-04-27 11:23:34
#133,225
3,434
-44 (-1.28%)
Anonymous

Secure Digital (SD) Card Details
Samsung eMMC (FE2Y7)
A2 C10 V30 U3
238.2G
SD
Samsung
FE2Y7
SD
6.00
0x1b
SM
3.0
11/2025
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133
200 (+150)

Operating System

Debian GNU/Linux 13 (trixie)
aarch64

Benchmark Results
62 MB/s
90.52 MB/s
89.91 MB/s
2,288 IOPS
8,123 IOPS
9,154 KB/s
32,495 KB/s
32,930 KB/s
8,972 KB/s
23,765 KB/s
8,764 KB/s

inxi Results
System: Host: raapi7 Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=ca2efa22-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE vc4.force_hotplug=x video=HDMI-A-1:1024x768@60D Desktop: Openbox v: 3.6.1 dm: N/A Distro: Debian GNU/Linux 13 (trixie) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.87 GiB used: 1.54 GiB (19.5%) igpu: 4 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6 driver: X: loaded: fbdev,modesetting gpu: N/A display-ID: localhost:10.0 API: Vulkan Message: No Vulkan data available. API: OpenGL Message: Unable to show GL data. glxinfo is missing. Audio: Device-1: bcm2712-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 17.0 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::3fa3:6536:b078:3990/64 type: noprefixroute scope: link IF-ID-1: br-6e428dc4835a state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::1426:51ff:fe2b:4d6/64 virtual: proto kernel_ll scope: link IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::5c16:64de:92f0:6396/64 type: noprefixroute scope: link IF-ID-4: veth21fb9e1 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth4023a13 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth563ff40 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: veth8d3aedb state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: veth98121ad state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: veth9bdb4f0 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-10: vethb2adffb state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: XX:XX:XX:XX:XX:XX Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 353.85 GiB used: 72.13 GiB (20.4%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: FE2Y7 size: 238.75 GiB block-size: physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 240GB family: Marvell based SSDs size: 115.1 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: UF4304RL temp: 60 C scheme: MBR SMART: yes state: enabled health: PASSED on: 92 hrs cycles: 14 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.24 GiB size: 234.44 GiB (98.40%) used: 63.13 GiB (26.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 37d2cb52-513e-40e1-b90f-213aa6096cba ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 76.9 MiB (15.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: 27E7-00CE ID-3: /media/usb_stick raw-size: 115.1 GiB size: 115.1 GiB (100.00%) used: 8.93 GiB (7.8%) fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: USB uuid: AB62-DC64 ID-4: /mnt/WD-NAS-II raw-size: N/A size: 2.68 TiB used: 1.61 TiB (60.1%) fs: cifs dev: /dev/NASserver Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 4-1:3 info: SanDisk Extreme Pro type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0781:5588 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 70.0 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1836 libs: 997 tools: apt,apt-get No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian trixie stable Active apt repos in: /etc/apt/sources.list.d/debian.sources 1: deb http://deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.sources 1: deb http://archive.raspberrypi.com/debian/ trixie main Processes: CPU top: 5 of 290 1: cpu: 8.1% command: rpcd_lsad pid: 1170741 mem: 25.6 MiB (0.3%) 2: cpu: 7.4% command: rpcd_lsad pid: 1170739 mem: 25.6 MiB (0.3%) 3: cpu: 1.8% command: bash pid: 1170745 mem: 3.30 MiB (0.0%) 4: cpu: 1.1% command: samba-dcerpcd pid: 1170729 mem: 16.7 MiB (0.2%) 5: cpu: 0.1% command: containerd pid: 968 mem: 64.0 MiB (0.7%) Memory top: 5 of 290 1: mem: 332.9 MiB (4.1%) command: redis-server pid: 1777 cpu: 0.1% 2: mem: 306.3 MiB (3.7%) command: gvmd pid: 2596 cpu: 0.0% 3: mem: 115.8 MiB (1.4%) command: ospd-openvas started-by: python3 pid: 1765 cpu: 0.0% 4: mem: 91.5 MiB (1.1%) command: dockerd pid: 989 cpu: 0.1% 5: mem: 64.0 MiB (0.7%) command: containerd pid: 968 cpu: 0.1% Info: Processes: 290 Uptime: 2d 22h 17m Init: systemd v: 257 default: multi-user tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Shell: Bash (sudo) v: 5.2.37 running-in: sshd-session inxi: 3.3.31

inxi Results

System:
  Host: raapi7 Kernel: 6.12.62+rpt-rpi-2712 arch: aarch64 bits: 64
    compiler: N/A clocksource: arch_sys_counter parameters: reboot=w
    coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory
    numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8
    system_heap.max_order=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    console=ttyAMA10,115200 console=tty1 root=PARTUUID=ca2efa22-02
    rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
    vc4.force_hotplug=x video=HDMI-A-1:1024x768@60D
  Desktop: Openbox v: 3.6.1 dm: N/A Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.87 GiB used: 1.54 GiB (19.5%)
    igpu: 4 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 512 KiB
    desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB
    desc: 1x2 MiB
  Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: server: X.org v: 1.21.X.X with: Xwayland v: 24.1.6 driver: X:
    loaded: fbdev,modesetting gpu: N/A display-ID: localhost:10.0
  API: Vulkan Message: No Vulkan data available.
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Device-1: bcm2712-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  API: ALSA v: k6.12.62+rpt-rpi-2712 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.4.2 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 17.0 status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel
    port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::3fa3:6536:b078:3990/64 type: noprefixroute scope: link
  IF-ID-1: br-6e428dc4835a state: up speed: 10000 Mbps duplex: unknown
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
  IP v6: fe80::1426:51ff:fe2b:4d6/64 virtual: proto kernel_ll scope: link
  IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
  IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::5c16:64de:92f0:6396/64 type: noprefixroute scope: link
  IF-ID-4: veth21fb9e1 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: veth4023a13 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: veth563ff40 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-7: veth8d3aedb state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-8: veth98121ad state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-9: veth9bdb4f0 state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IF-ID-10: vethb2adffb state: up speed: 10000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: down
    bt-service: enabled,running rfk-block: hardware: no software: yes
    address: XX:XX:XX:XX:XX:XX
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a
    class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 353.85 GiB used: 72.13 GiB (20.4%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: FE2Y7 size: 238.75 GiB
    block-size: physical: 512 B logical: 512 B type: Removable tech: SSD
    scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 240GB
    family: Marvell based SSDs size: 115.1 GiB block-size: physical: 512 B
    logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: UF4304RL
    temp: 60 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 92 hrs cycles: 14
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 238.24 GiB size: 234.44 GiB (98.40%)
    used: 63.13 GiB (26.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2
    maj-min: 179:2 label: rootfs uuid: 37d2cb52-513e-40e1-b90f-213aa6096cba
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%)
    used: 76.9 MiB (15.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1
    maj-min: 179:1 label: bootfs uuid: 27E7-00CE
  ID-3: /media/usb_stick raw-size: 115.1 GiB size: 115.1 GiB (100.00%)
    used: 8.93 GiB (7.8%) fs: exfat block-size: 512 B dev: /dev/sda1
    maj-min: 8:1 label: USB uuid: AB62-DC64
  ID-4: /mnt/WD-NAS-II raw-size: N/A size: 2.68 TiB used: 1.61 TiB (60.1%)
    fs: cifs dev: /dev/NASserver
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4 max-streams: 4 dev: /dev/zram0
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 4-1:3 info: SanDisk Extreme Pro type: mass storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 power: 896mA chip-ID: 0781:5588 class-ID: 0806
    Sensors:
  Src: /sys System Temperatures: cpu: 70.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1836 libs: 997 tools: apt,apt-get
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian trixie stable
  Active apt repos in: /etc/apt/sources.list.d/debian.sources
    1: deb http://deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.sources
    1: deb http://archive.raspberrypi.com/debian/ trixie main
Processes:
  CPU top: 5 of 290
  1: cpu: 8.1% command: rpcd_lsad pid: 1170741 mem: 25.6 MiB (0.3%)
  2: cpu: 7.4% command: rpcd_lsad pid: 1170739 mem: 25.6 MiB (0.3%)
  3: cpu: 1.8% command: bash pid: 1170745 mem: 3.30 MiB (0.0%)
  4: cpu: 1.1% command: samba-dcerpcd pid: 1170729 mem: 16.7 MiB (0.2%)
  5: cpu: 0.1% command: containerd pid: 968 mem: 64.0 MiB (0.7%)
  Memory top: 5 of 290
  1: mem: 332.9 MiB (4.1%) command: redis-server pid: 1777 cpu: 0.1%
  2: mem: 306.3 MiB (3.7%) command: gvmd pid: 2596 cpu: 0.0%
  3: mem: 115.8 MiB (1.4%) command: ospd-openvas started-by: python3
    pid: 1765 cpu: 0.0%
  4: mem: 91.5 MiB (1.1%) command: dockerd pid: 989 cpu: 0.1%
  5: mem: 64.0 MiB (0.7%) command: containerd pid: 968 cpu: 0.1%
Info:
  Processes: 290 Uptime: 2d 22h 17m Init: systemd v: 257 default: multi-user
  tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Shell: Bash (sudo) v: 5.2.37
  running-in: sshd-session inxi: 3.3.31

Benchmark #133225 - Brand: Samsung eMMC (FE2Y7)