Benchmark #133675 - pibenchmarks.com

Brand: Samsung PM9B1 M.2 NVMe Series
SSD (M.2 NVMe)
#85 / 1,701
228
#70 / 1,701
#70 / 990
#67 / 284
44,094
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-05-19 10:08:04
#133,675
23,147
-20,947 (-90.50%)
Anonymous
Rpi5

Storage Details
Samsung PM9B1 M.2 NVMe Series
SSD (M.2 NVMe)
118.7G
SSD
Samsung
MZ9L4128HCHQ-00BH1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Ubuntu 26.04 LTS
aarch64

Benchmark Results
258 MB/s
360.89 MB/s
364.67 MB/s
44,521 IOPS
94,377 IOPS
178,086 KB/s
377,511 KB/s
82,331 KB/s
70,149 KB/s
48,536 KB/s
88,124 KB/s

inxi Results
System: Kernel: 7.0.0-1010-raspi arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 zswap.enabled=1 zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 panic=10 rootwait fixrtc quiet splash Desktop: GNOME v: 50.1 tk: GTK v: 3.24.52 wm: gnome-shell dm: GDM3 v: 50.0 Distro: Ubuntu 26.04 LTS (Resolute Raccoon) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.75 GiB used: 2.94 GiB (38.0%) igpu: 4 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB Speed (MHz): avg: 2400 min/max: 1500/2400 boost: disabled scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: ghostwrite status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: old_microcode status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: unspecified server: X.Org v: 24.1.10 with: Xwayland v: 24.1.10 compositor: gnome-shell driver: dri: v3d gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: HDMI-A-2 mapped: HDMI-2 model: WS_E11B_V51 built: 2014 res: 1920x1080 hz: 60 dpi: 96 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 510x290mm (20.08x11.42") diag: 587mm (23.1") ratio: 16:9, 15:9 modes: 1280x720, 1920x1080, 1920x1080i, 1680x1050, 1680x945, 1400x1050, 1600x900, 1280x1024, 1440x900, 1280x960, 1366x768, 1360x768, 1280x800, 1152x864, 1280x768, 1024x768, 1024x576, 800x600, 720x576, 720x576i, 848x480, 720x480, 720x480i, 640x480, 720x400, 640x400, 640x350 API: EGL Message: EGL data requires eglinfo. Check --recommends. Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k7.0.0-1010-raspi status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.6.2 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pw-cat,pw-cli,wpctl Network: Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel modules: rp1_pci port: N/A bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 8.99 GiB (7.5%) ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZ9L4128HCHQ-00BH1 size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD fw-rev: HPS4NHBV temp: 34.9 C scheme: MBR SMART: yes health: PASSED on: 66 hrs cycles: 78 read-units: 382,995 [196 GB] written-units: 663,242 [339 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.74 GiB size: 116.76 GiB (98.33%) used: 8.81 GiB (7.5%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: writable uuid: e0052186-ed2e-4135-bffe-dd6277a39d8b ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 178.9 MiB (35.5%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: system-boot uuid: 75A7-9F0D Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd max-pool: 20% ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -1 file: /swapfile Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-2:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-2.1:3 info: Maxxter Telink Wireless Receiver type: mouse,keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 50mA chip-ID: 248a:8367 class-ID: 0301 Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-5: 4-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-6: 5-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 49.0 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: 1893 pm: dpkg pkgs: 1881 libs: 1062 tools: apt,apt-get pm: snap pkgs: 12 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources 1: deb http: //archive.ubuntu.com/ubuntu resolute resolute-updates resolute-backports main universe restricted multiverse 2: deb http: //security.ubuntu.com/ubuntu resolute-security main universe restricted multiverse Processes: CPU top: 5 of 269 1: cpu: 57.1% command: firefox pid: 4662 mem: 560.9 MiB (7.0%) 2: cpu: 20.8% command: whoopsie-upload-all started-by: python3 pid: 6303 mem: 118.9 MiB (1.4%) 3: cpu: 12.3% command: firefox pid: 5622 mem: 297.5 MiB (3.7%) 4: cpu: 8.3% command: gnome-shell pid: 3699 mem: 311.7 MiB (3.9%) 5: cpu: 4.7% command: firefox pid: 4871 mem: 227.4 MiB (2.8%) Memory top: 5 of 269 1: mem: 560.9 MiB (7.0%) command: firefox pid: 4662 cpu: 57.1% 2: mem: 311.7 MiB (3.9%) command: gnome-shell pid: 3699 cpu: 8.3% 3: mem: 297.5 MiB (3.7%) command: firefox pid: 5622 cpu: 12.3% 4: mem: 227.4 MiB (2.8%) command: firefox pid: 4871 cpu: 4.7% 5: mem: 210.2 MiB (2.6%) command: firefox pid: 5675 cpu: 1.9% Info: Processes: 269 Uptime: 5m Init: systemd v: 259 default: graphical tool: systemctl Compilers: N/A Client: shell wrapper v: 5.3.9-release inxi: 3.3.31

inxi Results

System:
  Kernel: 7.0.0-1010-raspi arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe numa_policy=interleave
    nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0
    iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000
    vc_mem.mem_size=0x40000000 zswap.enabled=1 zswap.compressor=zstd multipath=off
    dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 panic=10 rootwait fixrtc
    quiet splash
  Desktop: GNOME v: 50.1 tk: GTK v: 3.24.52 wm: gnome-shell dm: GDM3 v: 50.0 Distro: Ubuntu
    26.04 LTS (Resolute Raccoon)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.75 GiB used: 2.94 GiB (38.0%) igpu: 4 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 512 KiB desc: d-4x64 KiB! i-4x64 KiB L2: 2 MiB
    desc: 4x512 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 2400 min/max: 1500/2400 boost: disabled scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: unspecified server: X.Org v: 24.1.10 with: Xwayland v: 24.1.10 compositor: gnome-shell
    driver: dri: v3d
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-2 mapped: HDMI-2 model: WS_E11B_V51 built: 2014
    res: 1920x1080 hz: 60 dpi: 96 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600
    blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 510x290mm (20.08x11.42")
    diag: 587mm (23.1") ratio: 16:9, 15:9 modes: 1280x720, 1920x1080, 1920x1080i, 1680x1050,
    1680x945, 1400x1050, 1600x900, 1280x1024, 1440x900, 1280x960, 1366x768, 1360x768, 1280x800,
    1152x864, 1280x768, 1024x768, 1024x576, 800x600, 720x576, 720x576i, 848x480, 720x480,
    720x480i, 640x480, 720x400, 640x400, 640x350
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k7.0.0-1010-raspi status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.6.2 status: n/a (root, process) with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pw-cat,pw-cli,wpctl
Network:
  Device-1: Raspberry Pi RP1 PCIe 2.0 South Bridge driver: rp1 v: kernel modules: rp1_pci port: N/A
    bus-ID: 0002:01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: 
  IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  WAN IP: 
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: bcm7271-uart driver: ctrl bus-ID: N/A chip-ID: brcm:n/a class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.24 GiB used: 8.99 GiB (7.5%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZ9L4128HCHQ-00BH1 size: 119.24 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD fw-rev: HPS4NHBV temp: 34.9 C scheme: MBR
  SMART: yes health: PASSED on: 66 hrs cycles: 78 read-units: 382,995 [196 GB]
    written-units: 663,242 [339 GB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.74 GiB size: 116.76 GiB (98.33%) used: 8.81 GiB (7.5%) fs: ext4
    block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: writable
    uuid: e0052186-ed2e-4135-bffe-dd6277a39d8b
  ID-2: /boot/firmware raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 178.9 MiB (35.5%)
    fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: system-boot uuid: 75A7-9F0D
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd
    max-pool: 20%
  ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -1 file: /swapfile
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-2:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 1a40:0101 class-ID: 0900
  Device-1: 1-2.1:3 info: Maxxter Telink Wireless Receiver type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 50mA chip-ID: 248a:8367 class-ID: 0301
  Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-5: 4-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-6: 5-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 49.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: 1893 pm: dpkg pkgs: 1881 libs: 1062 tools: apt,apt-get pm: snap pkgs: 12
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources
    1: deb http: //archive.ubuntu.com/ubuntu resolute resolute-updates resolute-backports main universe restricted multiverse
    2: deb http: //security.ubuntu.com/ubuntu resolute-security main universe restricted multiverse
Processes:
  CPU top: 5 of 269
  1: cpu: 57.1% command: firefox pid: 4662 mem: 560.9 MiB (7.0%)
  2: cpu: 20.8% command: whoopsie-upload-all started-by: python3 pid: 6303 mem: 118.9 MiB (1.4%)
  3: cpu: 12.3% command: firefox pid: 5622 mem: 297.5 MiB (3.7%)
  4: cpu: 8.3% command: gnome-shell pid: 3699 mem: 311.7 MiB (3.9%)
  5: cpu: 4.7% command: firefox pid: 4871 mem: 227.4 MiB (2.8%)
  Memory top: 5 of 269
  1: mem: 560.9 MiB (7.0%) command: firefox pid: 4662 cpu: 57.1%
  2: mem: 311.7 MiB (3.9%) command: gnome-shell pid: 3699 cpu: 8.3%
  3: mem: 297.5 MiB (3.7%) command: firefox pid: 5622 cpu: 12.3%
  4: mem: 227.4 MiB (2.8%) command: firefox pid: 4871 cpu: 4.7%
  5: mem: 210.2 MiB (2.6%) command: firefox pid: 5675 cpu: 1.9%
Info:
  Processes: 269 Uptime: 5m Init: systemd v: 259 default: graphical tool: systemctl Compilers: N/A
  Client: shell wrapper v: 5.3.9-release inxi: 3.3.31

Benchmark #133675 - Brand: Samsung PM9B1 M.2 NVMe Series