Benchmark #13413 - pibenchmarks.com

Brand: Samsung PM871 mSATA
SSD (mSATA)
#771 / 1,679
7
#741 / 1,679
#715 / 984
#30 / 69
5,760
	Amazon.com AliExpress Amazon.ca Amazon.de Amazon.fr Amazon.it Amazon.sg

Overview
2020-03-22 17:03:55
#13,413
8,178
+2,418 (+29.57%)
ld
Samsung PM871 SSd on Pi4 using Suptronics X856 adapter w/o quirks

Storage Details
Samsung PM871 mSATA
SSD (mSATA)
128G
SSD
Samsung
SSDPM871mSATA128GB
mSATA
SATA
3.00
5,000
174c:0856
0x174c (ASMedia Technology Inc.)
0x0856
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
119 MB/s
318.36 MB/s
309.1 MB/s
12,263 IOPS
21,649 IOPS
49,053 KB/s
86,596 KB/s
35,451 KB/s
31,316 KB/s
20,665 KB/s
33,737 KB/s

inxi Results
System: Kernel: 4.19.106-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 243.8 MiB (12.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x39 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.106-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute dynamic scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 121.14 GiB used: 4.57 GiB (3.8%) ID-1: /dev/mmcblk0 model: SA02G size: 1.90 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD PM871 mSATA 128GB size: 119.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.31 GiB size: 28.84 GiB (98.42%) used: 2.64 GiB (9.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /media/NAS raw size: 59.15 GiB size: 57.97 GiB (98.01%) used: 246.8 MiB (0.4%) fs: ext4 block size: 4096 B dev: /dev/sda5 label: N/A uuid: 2e343571-89a7-4141-94e2-e74ea32b1fe2 ID-4: /mnt/jessie raw size: 30.49 GiB size: 30.00 GiB (98.39%) used: 1.64 GiB (5.5%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: rootfs uuid: 673b8ab6-6426-474b-87d3-71bff0fcebc3 Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 ID-2: /dev/sda4 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: QinHeng CH340S type: Printer driver: usblp interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7584 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0856 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 18.5% command: mysqld pid: 768 mem: 70.1 MiB (3.6%) 2: cpu: 2.5% command: ems-gen-graphs.py started by: python pid: 1621 mem: 5.45 MiB (0.2%) 3: cpu: 2.0% command: init pid: 1 mem: 6.09 MiB (0.3%) 4: cpu: 0.7% command: systemd-udevd pid: 136 mem: 3.38 MiB (0.1%) 5: cpu: 0.7% command: bash pid: 1322 mem: 2.63 MiB (0.1%) Memory top: 5 1: mem: 70.1 MiB (3.6%) command: mysqld pid: 768 cpu: 18.5% 2: mem: 27.4 MiB (1.4%) command: apache2 pid: 680 cpu: 0.1% 3: mem: 20.2 MiB (1.0%) command: gnuplot pid: 1642 cpu: 0.0% 4: mem: 13.5 MiB (0.6%) command: smbd pid: 1115 cpu: 0.0% 5: mem: 13.1 MiB (0.6%) command: colord pid: 495 cpu: 0.3% Info: Processes: 150 Uptime: 1m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.106-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 243.8 MiB (12.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x39 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.106-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 121.14 GiB used: 4.57 GiB (3.8%) 
           ID-1: /dev/mmcblk0 model: SA02G size: 1.90 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD PM871 mSATA 128GB size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.31 GiB size: 28.84 GiB (98.42%) used: 2.64 GiB (9.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /media/NAS raw size: 59.15 GiB size: 57.97 GiB (98.01%) used: 246.8 MiB (0.4%) 
           fs: ext4 block size: 4096 B dev: /dev/sda5 label: N/A 
           uuid: 2e343571-89a7-4141-94e2-e74ea32b1fe2 
           ID-4: /mnt/jessie raw size: 30.49 GiB size: 30.00 GiB (98.39%) used: 1.64 GiB (5.5%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: rootfs 
           uuid: 673b8ab6-6426-474b-87d3-71bff0fcebc3 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
           ID-2: /dev/sda4 size: 1 KiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: QinHeng CH340S type: Printer driver: usblp interfaces: 1 
           rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7584 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0856 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 18.5% command: mysqld pid: 768 mem: 70.1 MiB (3.6%) 
           2: cpu: 2.5% command: ems-gen-graphs.py started by: python pid: 1621 
           mem: 5.45 MiB (0.2%) 
           3: cpu: 2.0% command: init pid: 1 mem: 6.09 MiB (0.3%) 
           4: cpu: 0.7% command: systemd-udevd pid: 136 mem: 3.38 MiB (0.1%) 
           5: cpu: 0.7% command: bash pid: 1322 mem: 2.63 MiB (0.1%) 
           Memory top: 5 
           1: mem: 70.1 MiB (3.6%) command: mysqld pid: 768 cpu: 18.5% 
           2: mem: 27.4 MiB (1.4%) command: apache2 pid: 680 cpu: 0.1% 
           3: mem: 20.2 MiB (1.0%) command: gnuplot pid: 1642 cpu: 0.0% 
           4: mem: 13.5 MiB (0.6%) command: smbd pid: 1115 cpu: 0.0% 
           5: mem: 13.1 MiB (0.6%) command: colord pid: 495 cpu: 0.3% 
Info:      Processes: 150 Uptime: 1m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 
           Client: shell wrapper v: 4.4.12-release inxi: 3.0.38

Benchmark #13413 - Brand: Samsung PM871 mSATA