Benchmark #13422 - pibenchmarks.com

Brand: Lexar SD 633x
C10 V90 U3
#148 / 1,539
73
#1,045 / 1,539
#60 / 369
1,471
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-22 19:45:47
#13,422
977
-494 (-50.56%)
DT
Lexar 64GB microSDXC UHS-II V90 on Pi4

Secure Digital (SD) Card Details
Lexar SD 633x
C10 V90 U3
58.1G
SD
Lexar
LX64G
SDXC
5.00
0xad
LS
1.0
10/2019
Class 10
None
U3
V90

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
12 MB/s
41.05 MB/s
41.09 MB/s
246 IOPS
3,910 IOPS
986 KB/s
15,642 KB/s
11,667 KB/s
1,343 KB/s
10,166 KB/s
1,366 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 475.6 MiB (11.9%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 58.37 GiB used: 14.35 GiB (24.6%) ID-1: /dev/mmcblk0 model: LX64G size: 58.37 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.12 GiB size: 57.16 GiB (98.35%) used: 14.30 GiB (25.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Prolific PL2303 Serial Port type: driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 067b:2303 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: N/A type: driver: N/A interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 03c3:120e Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/astroberry.list 1: deb https: //www.astroberry.io/repo/ buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/skychart.list 1: deb http: //www.ap-i.net/apt unstable main Processes: CPU top: 5 1: cpu: 1.7% command: lxpanel pid: 697 mem: 33.1 MiB (0.8%) 2: cpu: 1.3% command: xorg pid: 578 mem: 59.8 MiB (1.5%) 3: cpu: 1.2% command: init pid: 1 mem: 8.20 MiB (0.2%) 4: cpu: 0.9% command: vncserver-x11-core pid: 563 mem: 28.4 MiB (0.7%) 5: cpu: 0.5% command: lxterminal pid: 1467 mem: 28.1 MiB (0.7%) Memory top: 5 1: mem: 59.8 MiB (1.5%) command: xorg pid: 578 cpu: 1.3% 2: mem: 53.7 MiB (1.3%) command: nm-applet pid: 718 cpu: 0.4% 3: mem: 38.7 MiB (1.0%) command: astropanel.py started by: python3 pid: 1034 cpu: 0.3% 4: mem: 33.1 MiB (0.8%) command: lxpanel pid: 697 cpu: 1.7% 5: mem: 30.8 MiB (0.7%) command: gpspanel.py started by: python3 pid: 1032 cpu: 0.3% Info: Processes: 174 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 
           root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 475.6 MiB (11.9%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 58.37 GiB used: 14.35 GiB (24.6%) 
           ID-1: /dev/mmcblk0 model: LX64G size: 58.37 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.12 GiB size: 57.16 GiB (98.35%) used: 14.30 GiB (25.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Prolific PL2303 Serial Port type:  
           driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 067b:2303 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: N/A type:  driver: N/A interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 03c3:120e 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/astroberry.list 
           1: deb https: //www.astroberry.io/repo/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/skychart.list 
           1: deb http: //www.ap-i.net/apt unstable main
Processes: CPU top: 5 
           1: cpu: 1.7% command: lxpanel pid: 697 mem: 33.1 MiB (0.8%) 
           2: cpu: 1.3% command: xorg pid: 578 mem: 59.8 MiB (1.5%) 
           3: cpu: 1.2% command: init pid: 1 mem: 8.20 MiB (0.2%) 
           4: cpu: 0.9% command: vncserver-x11-core pid: 563 mem: 28.4 MiB (0.7%) 
           5: cpu: 0.5% command: lxterminal pid: 1467 mem: 28.1 MiB (0.7%) 
           Memory top: 5 
           1: mem: 59.8 MiB (1.5%) command: xorg pid: 578 cpu: 1.3% 
           2: mem: 53.7 MiB (1.3%) command: nm-applet pid: 718 cpu: 0.4% 
           3: mem: 38.7 MiB (1.0%) command: astropanel.py started by: python3 pid: 1034 cpu: 0.3% 
           4: mem: 33.1 MiB (0.8%) command: lxpanel pid: 697 cpu: 1.7% 
           5: mem: 30.8 MiB (0.7%) command: gpspanel.py started by: python3 pid: 1032 cpu: 0.3% 
Info:      Processes: 174 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13422 - Brand: Lexar SD 633x