Benchmark #134234 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#23 / 1,702
618
#577 / 1,702
#555 / 990
#110 / 370
6,728
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2026-06-20 15:40:02
#134,234
7,118
+390 (+5.48%)
Anonymous
Codex run 1: exFAT on Samsung 850 EVO via StarTech 14b0:0206, UAS enabled after trim

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD850EVO500GB
SATA
3.20
5,000
14b0:0206
0x14b0
0x0206 (Coolpix 5200 (ptp))
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
41.3 MB/s
43.51 MB/s
46.05 MB/s
2,268 IOPS
25,600 IOPS
9,072 KB/s
102,400 KB/s
38,816 KB/s
21,307 KB/s
24,116 KB/s
38,817 KB/s

inxi Results
System: Kernel: 6.12.93+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 numa=fake=2 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c98bbdf4-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US Console: pty pts/1 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB available: 3.71 GiB used: 726.7 MiB (19.1%) igpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40 API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu name: V3D 4.2.X.X driver: mesa v3dv v: 24.2.8-1~bpo12+rpt4 device-ID: 14e4:be485fd3 surfaces: N/A device: 1 type: cpu name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 24.2.8-1~bpo12+rpt4 (LLVM 15.0.6) device-ID: 10005:0000 surfaces: N/A API: OpenGL Message: GL data unavailable in console, glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.12.93+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-1: br-fcc5bf7909cd state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: tailscale0 state: unknown speed: -1 duplex: full mac: N/A IP v6: virtual: stable-privacy scope: link IF-ID-4: veth90b4cf7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethc0eaea6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethcbb2c43 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethf575197 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011-axi driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: pl011-axi driver: ctrl bus-ID: N/A chip-ID: arm:gpiochip0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 525.39 GiB used: 12.89 GiB (2.5%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: EC2QT size: 59.62 GiB block-size: physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 500GB size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.12 GiB size: 58.13 GiB (98.32%) used: 12.81 GiB (22.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 77.8 MiB (15.3%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: 50C8-AEAE ID-3: /tmp/external raw-size: 464.92 GiB size: 464.9 GiB (100.00%) used: 2.4 MiB (0.0%) fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: F203-C51A Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 200 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda2 maj-min: 8:2 size: 859 MiB fs: ntfs label: N/A uuid: 44AC930AAC92F620 USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: StarTech.com SSD 850 EVO 500G type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 14b0:0206 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 52.6 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1727 libs: 910 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http: //deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http: //deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bookworm stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.com/debian/ bookworm main Active apt repos in: /etc/apt/sources.list.d/tailscale.list 1: deb [signed-by=/usr/share/keyrings/tailscale-archive-keyring.gpg] https: //pkgs.tailscale.com/stable/debian bookworm main Active apt repos in: /etc/apt/sources.list.d/weechat.list 1: deb [signed-by=/usr/share/keyrings/weechat-archive-keyring.gpg] https: //weechat.org/raspbian bookworm main 2: deb-src [signed-by=/usr/share/keyrings/weechat-archive-keyring.gpg] https: //weechat.org/raspbian bookworm main Processes: CPU top: 5 of 243 1: cpu: 3.0% command: docker pid: 1944913 mem: 28.0 MiB (0.7%) 2: cpu: 2.4% command: docker pid: 1944915 mem: 27.6 MiB (0.7%) 3: cpu: 1.6% command: sshd: pid: 1944748 mem: 9.92 MiB (0.2%) 4: cpu: 1.5% command: bash pid: 1944890 mem: 3.02 MiB (0.0%) 5: cpu: 1.4% command: dockerd pid: 36723 mem: 107.0 MiB (2.8%) Memory top: 5 of 243 1: mem: 288.5 MiB (7.5%) command: jellyfin pid: 163439 cpu: 0.1% 2: mem: 107.0 MiB (2.8%) command: dockerd pid: 36723 cpu: 1.4% 3: mem: 74.0 MiB (1.9%) command: arcane pid: 60976 cpu: 0.1% 4: mem: 63.3 MiB (1.6%) command: weechat pid: 1426 cpu: 0.3% 5: mem: 57.6 MiB (1.5%) command: containerd pid: 36642 cpu: 0.8% Info: Processes: 243 Uptime: 4d 13h 43m Init: systemd v: 252 target: multi-user (3) default: multi-user tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.12.93+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0
    cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0
    snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0
    numa=fake=2 system_heap.max_order=0 iommu_dma_numa_policy=interleave
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=c98bbdf4-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US
  Console: pty pts/1 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A rev: c03111 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB available: 3.71 GiB used: 726.7 MiB (19.1%) igpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 driver: X: loaded: modesetting
    unloaded: fbdev dri: vc4 gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40
  API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu name: V3D 4.2.X.X
    driver: mesa v3dv v: 24.2.8-1~bpo12+rpt4 device-ID: 14e4:be485fd3 surfaces: N/A device: 1
    type: cpu name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 24.2.8-1~bpo12+rpt4
    (LLVM 15.0.6) device-ID: 10005:0000 surfaces: N/A
  API: OpenGL Message: GL data unavailable in console, glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.12.93+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic noprefixroute scope: global
  IP v6:  type: noprefixroute scope: link
  IF-ID-1: br-fcc5bf7909cd state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: tailscale0 state: unknown speed: -1 duplex: full mac: N/A
  IP v6:  virtual: stable-privacy scope: link
  IF-ID-4: veth90b4cf7 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: vethc0eaea6 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: vethcbb2c43 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vethf575197 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011-axi driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: pl011-axi driver: ctrl bus-ID: N/A chip-ID: arm:gpiochip0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 525.39 GiB used: 12.89 GiB (2.5%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: EC2QT size: 59.62 GiB block-size:
    physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 500GB size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1
    mode: 3.2 gen-1x1 tech: SSD scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 59.12 GiB size: 58.13 GiB (98.32%) used: 12.81 GiB (22.0%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 77.8 MiB (15.3%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: 50C8-AEAE
  ID-3: /tmp/external raw-size: 464.92 GiB size: 464.9 GiB (100.00%) used: 2.4 MiB (0.0%)
    fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: F203-C51A
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 200 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  ID-1: /dev/sda2 maj-min: 8:2 size: 859 MiB fs: ntfs label: N/A uuid: 44AC930AAC92F620
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: StarTech.com SSD 850 EVO 500G type: mass storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 14b0:0206
    class-ID: 0806 Sensors:
  Src: /sys System Temperatures: cpu: 52.6 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1727 libs: 910 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http: //deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http: //deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bookworm stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.com/debian/ bookworm main
  Active apt repos in: /etc/apt/sources.list.d/tailscale.list
    1: deb [signed-by=/usr/share/keyrings/tailscale-archive-keyring.gpg] https: //pkgs.tailscale.com/stable/debian bookworm main
  Active apt repos in: /etc/apt/sources.list.d/weechat.list
    1: deb [signed-by=/usr/share/keyrings/weechat-archive-keyring.gpg] https: //weechat.org/raspbian bookworm main
    2: deb-src [signed-by=/usr/share/keyrings/weechat-archive-keyring.gpg] https: //weechat.org/raspbian bookworm main
Processes:
  CPU top: 5 of 243
  1: cpu: 3.0% command: docker pid: 1944913 mem: 28.0 MiB (0.7%)
  2: cpu: 2.4% command: docker pid: 1944915 mem: 27.6 MiB (0.7%)
  3: cpu: 1.6% command: sshd: pid: 1944748 mem: 9.92 MiB (0.2%)
  4: cpu: 1.5% command: bash pid: 1944890 mem: 3.02 MiB (0.0%)
  5: cpu: 1.4% command: dockerd pid: 36723 mem: 107.0 MiB (2.8%)
  Memory top: 5 of 243
  1: mem: 288.5 MiB (7.5%) command: jellyfin pid: 163439 cpu: 0.1%
  2: mem: 107.0 MiB (2.8%) command: dockerd pid: 36723 cpu: 1.4%
  3: mem: 74.0 MiB (1.9%) command: arcane pid: 60976 cpu: 0.1%
  4: mem: 63.3 MiB (1.6%) command: weechat pid: 1426 cpu: 0.3%
  5: mem: 57.6 MiB (1.5%) command: containerd pid: 36642 cpu: 0.8%
Info:
  Processes: 243 Uptime: 4d 13h 43m Init: systemd v: 252 target: multi-user (3) default: multi-user
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release
  inxi: 3.3.31

Benchmark #134234 - Brand: Samsung 850 EVO