Benchmark #134521 - pibenchmarks.com

Brand: EDILOCA EN206
SSD (M.2 NVMe)
#555 / 1,702
16
#312 / 1,702
#304 / 990
#248 / 284
9,494
	Amazon.com AliExpress

Overview
2026-07-15 06:42:03
#134,521
10,906
+1,412 (+12.95%)
Anonymous

Storage Details
EDILOCA EN206
SSD (M.2 NVMe)
512G
SSD
EDILOCA
EN206512GB
M.2
SATA
3.20
5,000
152d:a580
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0xa580
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500

Operating System

Debian GNU/Linux 13 (trixie)
aarch64

Benchmark Results
226 MB/s
301.21 MB/s
285.59 MB/s
20,813 IOPS
33,907 IOPS
83,252 KB/s
135,629 KB/s
30,803 KB/s
36,233 KB/s
24,252 KB/s
35,140 KB/s

inxi Results
System: Kernel: 6.18.34+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 numa=fake=1 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=79b9e0b1-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=AU Console: pty pts/0 Distro: Debian GNU/Linux 13 (trixie) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A rev: c03115 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB available: 3.7 GiB used: 302.2 MiB (8.0%) igpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: disabled cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1800 min/max: 600/1800 boost: disabled scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: ghostwrite status: Not affected Type: indirect_target_selection status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: old_microcode status: Not affected Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsa status: Not affected Type: tsx_async_abort status: Not affected Type: vmscape status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 API: N/A Message: No API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.18.34+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: virtual: proto kernel_ll scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig Bluetooth: Device-1: pl011-axi driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept Device-2: pl011-axi driver: ctrl bus-ID: N/A chip-ID: arm:gpiochip0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 506.66 GiB used: 4.07 GiB (0.8%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 model: EDILOCA EN206 512GB MX size: 476.94 GiB block-size: physical: 4096 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD fw-rev: 0203 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 476.43 GiB size: 467.88 GiB (98.21%) used: 4 GiB (0.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 0a5e8613-190d-476e-b515-c0cd8cd7b4c1 ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 75.4 MiB (14.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: E6B2-8E82 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd avail: lzo-rle,lzo,lz4 dev: /dev/zram0 Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 512 MiB fs: vfat label: bootfs uuid: B2F0-82D2 ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 29.22 GiB fs: ext4 label: rootfs uuid: 15f4c6be-1102-4331-9904-f78e78afd1fd USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / USA USB Mass Storage type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 152d:a580 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 26.3 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 687 libs: 333 tools: apt,apt-get No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/debian.sources 1: deb http: //deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware 2: deb http: //deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.sources 1: deb http: //archive.raspberrypi.com/debian/ trixie main Processes: CPU top: 5 of 166 1: cpu: 2.8% command: init pid: 1 mem: 14.3 MiB (0.3%) 2: cpu: 0.7% command: [kworker/u16:3-writeback] pid: 50 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: dbus-daemon pid: 573 mem: 4.34 MiB (0.1%) 4: cpu: 0.2% command: [kworker/u16:0-ext4-rsv-conversion] pid: 12 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: networkmanager pid: 589 mem: 19.6 MiB (0.5%) Memory top: 5 of 166 1: mem: 19.6 MiB (0.5%) command: networkmanager pid: 589 cpu: 0.2% 2: mem: 14.3 MiB (0.3%) command: init pid: 1 cpu: 2.8% 3: mem: 12.0 MiB (0.3%) command: systemd pid: 1078 cpu: 0.1% 4: mem: 11.7 MiB (0.3%) command: wpa_supplicant pid: 591 cpu: 0.0% 5: mem: 11.6 MiB (0.3%) command: sshd-session: pid: 1068 cpu: 0.0% Info: Processes: 166 Uptime: 3m Init: systemd v: 257 default: multi-user tool: systemctl Compilers: gcc: 14.2.0 alt: 14 Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.18.34+rpt-rpi-v8 arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter
    parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0
    cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32
    snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0
    numa=fake=1 system_heap.max_order=0 iommu_dma_numa_policy=interleave
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=ttyS0,115200 console=tty1 root=PARTUUID=79b9e0b1-02 rootfstype=ext4 fsck.repair=yes
    rootwait cfg80211.ieee80211_regdom=AU
  Console: pty pts/0 Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A rev: c03115 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB available: 3.7 GiB used: 302.2 MiB (8.0%) igpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: disabled cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1800 min/max: 600/1800 boost: disabled scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsa status: Not affected
  Type: tsx_async_abort status: Not affected
  Type: vmscape status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: N/A Message: No API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.18.34+rpt-rpi-v8 status: kernel-api tools: alsactl,alsamixer,amixer
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  virtual: proto kernel_ll scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig
Bluetooth:
  Device-1: pl011-axi driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
    hardware: no software: yes address: 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
  Device-2: pl011-axi driver: ctrl bus-ID: N/A chip-ID: arm:gpiochip0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 506.66 GiB used: 4.07 GiB (0.8%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size:
    physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 model: EDILOCA EN206 512GB MX size: 476.94 GiB block-size:
    physical: 4096 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    tech: SSD fw-rev: 0203 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 476.43 GiB size: 467.88 GiB (98.21%) used: 4 GiB (0.9%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 0a5e8613-190d-476e-b515-c0cd8cd7b4c1
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 75.4 MiB (14.8%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: E6B2-8E82
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 2 GiB used: 0 KiB (0.0%) priority: 100 comp: zstd
    avail: lzo-rle,lzo,lz4 dev: /dev/zram0
Unmounted:
  ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 512 MiB fs: vfat label: bootfs uuid: B2F0-82D2
  ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 29.22 GiB fs: ext4 label: rootfs
    uuid: 15f4c6be-1102-4331-9904-f78e78afd1fd
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: JMicron / USA USB Mass Storage type: mass storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
    chip-ID: 152d:a580 class-ID: 0806 Sensors:
  Src: /sys System Temperatures: cpu: 26.3 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 687 libs: 333 tools: apt,apt-get
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian.sources
    1: deb http: //deb.debian.org/debian/ trixie trixie-updates main contrib non-free non-free-firmware
    2: deb http: //deb.debian.org/debian-security/ trixie-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.sources
    1: deb http: //archive.raspberrypi.com/debian/ trixie main
Processes:
  CPU top: 5 of 166
  1: cpu: 2.8% command: init pid: 1 mem: 14.3 MiB (0.3%)
  2: cpu: 0.7% command: [kworker/u16:3-writeback] pid: 50 mem: 0.00 MiB (0.0%)
  3: cpu: 0.3% command: dbus-daemon pid: 573 mem: 4.34 MiB (0.1%)
  4: cpu: 0.2% command: [kworker/u16:0-ext4-rsv-conversion] pid: 12 mem: 0.00 MiB (0.0%)
  5: cpu: 0.2% command: networkmanager pid: 589 mem: 19.6 MiB (0.5%)
  Memory top: 5 of 166
  1: mem: 19.6 MiB (0.5%) command: networkmanager pid: 589 cpu: 0.2%
  2: mem: 14.3 MiB (0.3%) command: init pid: 1 cpu: 2.8%
  3: mem: 12.0 MiB (0.3%) command: systemd pid: 1078 cpu: 0.1%
  4: mem: 11.7 MiB (0.3%) command: wpa_supplicant pid: 591 cpu: 0.0%
  5: mem: 11.6 MiB (0.3%) command: sshd-session: pid: 1068 cpu: 0.0%
Info:
  Processes: 166 Uptime: 3m Init: systemd v: 257 default: multi-user tool: systemctl Compilers:
  gcc: 14.2.0 alt: 14 Client: shell wrapper v: 5.2.37-release inxi: 3.3.31

Benchmark #134521 - Brand: EDILOCA EN206