Benchmark #13483 - pibenchmarks.com

Brand: Kingston SSDNow
SSD (2.5" SATA)
#803 / 1,675
6
#954 / 1,675
#891 / 984
#313 / 370
3,960
	Amazon.com AliExpress Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-03-23 10:21:19
#13,483
2,725
-1,235 (-45.32%)
Anonymous

Storage Details
Kingston SSDNow
SSD (2.5" SATA)
40G
SSD
Kingston
SSDNow40GB
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.2 MB/s
165.55 MB/s
151.43 MB/s
7,693 IOPS
5,015 IOPS
30,773 KB/s
20,063 KB/s
29,046 KB/s
21,111 KB/s
13,945 KB/s
3,787 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e8af789a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 965.2 MiB (24.2%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-3: veth1e93d11 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth4b6a91d state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethe16ebb5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethec69ceb state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 66.28 GiB used: 30.65 GiB (46.2%) ID-1: /dev/mmcblk0 model: SD32G size: 29.03 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB 3.0 drive model: SSDNow 40GB family: branded X25-V SSDs size: 37.25 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0508 drive rev: 2CV102HD scheme: GPT SMART: yes state: enabled health: PASSED on: 2y 286d 17h cycles: 5257 written: 9.70 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 37.25 GiB size: 36.41 GiB (97.75%) used: 15.30 GiB (42.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 8816d62e-38c3-4a5d-b49c-bb8bf7f0a5cc ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 0C61-73F5 ID-3: /var/lib/docker/overlay2/646f3d806b438d70f967cdee6c3ad5041ff51c9fb5012978c7626f207f4c43eb/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/65a880866560b8149b874d3f1b0b54aa3d15ea7f17e64192ed37215c76ba8308/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/a26f4cb9175c639654b541947ce56b602588e84fe36ea92d090ac143a4d63cae/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/e25b84d79c3b471a5368c91c95c50f276645b716320fc01aa886709ea5e4ab5d/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 28.77 GiB fs: ext4 label: N/A uuid: 26be1e3d-e8b2-482d-b6d9-a1409ca8631e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/headmelted_vscode.list 1: deb https: //packagecloud.io/headmelted/codebuilds/debian/ stretch main No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 20.6% command: motion pid: 25022 mem: 55.1 MiB (1.4%) 2: cpu: 0.5% command: smartd pid: 22156 mem: 3.18 MiB (0.0%) 3: cpu: 0.4% command: meyectl started by: python pid: 384 mem: 23.2 MiB (0.6%) 4: cpu: 0.4% command: lxterminal pid: 30480 mem: 24.1 MiB (0.6%) 5: cpu: 0.3% command: gunicorn started by: python pid: 1872 mem: 70.9 MiB (1.9%) Memory top: 5 1: mem: 70.9 MiB (1.9%) command: gunicorn started by: python pid: 1872 cpu: 0.3% 2: mem: 64.1 MiB (1.7%) command: gunicorn started by: python pid: 1873 cpu: 0.3% 3: mem: 63.3 MiB (1.6%) command: xorg pid: 662 cpu: 0.1% 4: mem: 55.1 MiB (1.4%) command: motion pid: 25022 cpu: 20.6% 5: mem: 52.0 MiB (1.3%) command: plex pid: 444 cpu: 0.1% Info: Processes: 224 Uptime: 2d 1h 00m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=e8af789a-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           root=/dev/sda1 rootfstype=ext4 rootwait 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 965.2 MiB (24.2%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo resolution: 1920x1080~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-3: veth1e93d11 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth4b6a91d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethe16ebb5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethec69ceb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 66.28 GiB used: 30.65 GiB (46.2%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 29.03 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB 3.0 drive model: SSDNow 40GB 
           family: branded X25-V SSDs size: 37.25 GiB block size: physical: 4096 B logical: 512 B 
           sata: 2.6 speed: 3.0 Gb/s rev: 0508 
           drive rev: 2CV102HD scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 2y 286d 17h cycles: 5257 written: 9.70 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 37.25 GiB size: 36.41 GiB (97.75%) used: 15.30 GiB (42.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 8816d62e-38c3-4a5d-b49c-bb8bf7f0a5cc 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 0C61-73F5 
           ID-3: /var/lib/docker/overlay2/646f3d806b438d70f967cdee6c3ad5041ff51c9fb5012978c7626f207f4c43eb/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/65a880866560b8149b874d3f1b0b54aa3d15ea7f17e64192ed37215c76ba8308/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/a26f4cb9175c639654b541947ce56b602588e84fe36ea92d090ac143a4d63cae/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/e25b84d79c3b471a5368c91c95c50f276645b716320fc01aa886709ea5e4ab5d/merged raw size: N/A size: 36.41 GiB used: 15.30 GiB (42.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.77 GiB fs: ext4 label: N/A 
           uuid: 26be1e3d-e8b2-482d-b6d9-a1409ca8631e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/headmelted_vscode.list 
           1: deb https: //packagecloud.io/headmelted/codebuilds/debian/ stretch main
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 20.6% command: motion pid: 25022 mem: 55.1 MiB (1.4%) 
           2: cpu: 0.5% command: smartd pid: 22156 mem: 3.18 MiB (0.0%) 
           3: cpu: 0.4% command: meyectl started by: python pid: 384 mem: 23.2 MiB (0.6%) 
           4: cpu: 0.4% command: lxterminal pid: 30480 mem: 24.1 MiB (0.6%) 
           5: cpu: 0.3% command: gunicorn started by: python pid: 1872 mem: 70.9 MiB (1.9%) 
           Memory top: 5 
           1: mem: 70.9 MiB (1.9%) command: gunicorn started by: python pid: 1872 cpu: 0.3% 
           2: mem: 64.1 MiB (1.7%) command: gunicorn started by: python pid: 1873 cpu: 0.3% 
           3: mem: 63.3 MiB (1.6%) command: xorg pid: 662 cpu: 0.1% 
           4: mem: 55.1 MiB (1.4%) command: motion pid: 25022 cpu: 20.6% 
           5: mem: 52.0 MiB (1.3%) command: plex pid: 444 cpu: 0.1% 
Info:      Processes: 224 Uptime: 2d 1h 00m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.38

Benchmark #13483 - Brand: Kingston SSDNow