Benchmark #13523 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#13 / 1,539
610
#828 / 1,539
#4 / 90
#8 / 86
4,005
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-23 17:50:09
#13,523
808
-3,197 (-395.67%)
nothing
nothing

Storage Details
Generic USB Disk
USB Flash
1.5G
USB Flash
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.9 MB/s
87.06 MB/s
78.88 MB/s
345 IOPS
2,592 IOPS
1,382 KB/s
10,370 KB/s
12,183 KB/s
1,940 KB/s
4,872 KB/s
1,294 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 226.4 MiB (5.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 152x90 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::c42:66a0:cdbe:1a82/64 scope: link WAN IP: 173.66.X.X Drives: Local Storage: total: 236.62 GiB used: 2.58 GiB (1.1%) ID-1: /dev/mmcblk0 model: SS08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra Fit size: 114.61 GiB block size: physical: 512 B logical: 512 B rev: 1.00 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Fit size: 114.61 GiB block size: physical: 512 B logical: 512 B rev: 1.00 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Supported md-raid types: raid1 Device-1: md0 type: mdraid status: active Components: online: sdb~c1 sda~c0 Info: raid: mirror blocks: 120110080 report: 2/2 UU chunk size: N/A super blocks: 1.2 Partition: ID-1: / raw size: 7.15 GiB size: 7.01 GiB (98.00%) used: 1.47 GiB (21.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.8 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /tmp/testdisk raw size: 1.47 GiB size: 1.41 GiB (96.30%) used: 1.06 GiB (74.7%) fs: ext4 block size: 4096 B dev: /dev/md0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:3 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5583 Device-2: 2-2:2 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:5583 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.5% command: [kworker/u8:3-events_unbound] pid: 13589 mem: 0.00 MiB (0.0%) 2: cpu: 1.4% command: [usb-storage] pid: 2193 mem: 0.00 MiB (0.0%) 3: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 13642 mem: 0.00 MiB (0.0%) 4: cpu: 1.3% command: nmon pid: 13859 mem: 3.80 MiB (0.0%) 5: cpu: 0.9% command: [kworker/u8:1-events_unbound] pid: 13577 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 8.10 MiB (0.2%) command: init pid: 1 cpu: 0.1% 2: mem: 7.77 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.0% 3: mem: 6.82 MiB (0.1%) command: systemd pid: 812 cpu: 0.0% 4: mem: 6.18 MiB (0.1%) command: sshd: pid: 792 cpu: 0.0% 5: mem: 5.67 MiB (0.1%) command: systemd-logind pid: 332 cpu: 0.0% Info: Processes: 150 Uptime: 2h 28m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 inxi: 3.0.38

inxi Results

System:    Host: raspberrypi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.89 GiB used: 226.4 MiB (5.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 152x90 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::c42:66a0:cdbe:1a82/64 scope: link 
           WAN IP: 173.66.X.X 
Drives:    Local Storage: total: 236.62 GiB used: 2.58 GiB (1.1%) 
           ID-1: /dev/mmcblk0 model: SS08G size: 7.40 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Ultra Fit size: 114.61 GiB block size: physical: 512 B 
           logical: 512 B            rev: 1.00 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: SanDisk model: Ultra Fit size: 114.61 GiB block size: physical: 512 B 
           logical: 512 B            rev: 1.00 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Supported md-raid types: raid1 
           Device-1: md0 type: mdraid status: active Components: online: sdb~c1 sda~c0 
           Info: raid: mirror blocks: 120110080 report: 2/2 UU chunk size: N/A super blocks: 1.2 
Partition: ID-1: / raw size: 7.15 GiB size: 7.01 GiB (98.00%) used: 1.47 GiB (21.0%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.8 MiB (21.3%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /tmp/testdisk raw size: 1.47 GiB size: 1.41 GiB (96.30%) used: 1.06 GiB (74.7%) fs: ext4 block size: 4096 B 
           dev: /dev/md0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:3 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s 
           chip ID: 0781:5583            Device-2: 2-2:2 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s 
           chip ID: 0781:5583 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.5% command: [kworker/u8:3-events_unbound] pid: 13589 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.4% command: [usb-storage] pid: 2193 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 13642 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.3% command: nmon pid: 13859 mem: 3.80 MiB (0.0%) 
           5: cpu: 0.9% command: [kworker/u8:1-events_unbound] pid: 13577 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.10 MiB (0.2%) command: init pid: 1 cpu: 0.1% 
           2: mem: 7.77 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.0% 
           3: mem: 6.82 MiB (0.1%) command: systemd pid: 812 cpu: 0.0% 
           4: mem: 6.18 MiB (0.1%) command: sshd: pid: 792 cpu: 0.0% 
           5: mem: 5.67 MiB (0.1%) command: systemd-logind pid: 332 cpu: 0.0% 
Info:      Processes: 150 Uptime: 2h 28m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           inxi: 3.0.38